email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

Kärger Lathes - Germany

1950s Precision Kärger Type DL1   1930s Kärger Type DL2
 
1920s Screwcutting   Karger Sliding-spindle Chase Screwcutting
 
Post WW2 Lathes   DL Lathes  Restored  Kärgers  Precision Bench Karger

Karger Miller


G. Kärger of Kraut-Strasse 52, Berlin 0.27 were makers from the late 1800s of high quality machine tools including millers and a range of precision plain-turning and screwcutting lathes designed for use in the watch, clock and instrument making trades. Models offered varied from simple bench machines to very much more complicated types for advanced work with the DP3, illustrated below, being a typical example as manufactured at the turn of the 19th and 20th centuries. Thoroughly well-made, this was a V-bed lathe and, although it closely reflected contemporary design for its type, it was a rather larger machine than those manufactured for the same purpose by makers in the USA such as Bottum, American Watch Tool Company, B.C.Ames, Bottum, Hjorth, Potter, Pratt & Whitney, Rivett, Wade, Waltham Machine Works, WadePratt & Whitney, Rivett, Cataract, Hardinge, Elgin, Remington, Sloan & Chace, and Frederick Pearce.  It was also very similar in style to models from Auerbach, another German machine-tool company.  Notable points on the DP3 that indicate a machine of quality (and one intended to help the professional user) include the large-diameter front headstock bearing, a 5-speed headstock pulley, well braced stand legs, a built-in storage shelf and locking cupboard, a long foot-treadle bar and a forged flywheel shaft running in independently-mounted bearing housings. So well made were these types that many continue in serious use today, being ideal for work that requires delicate manipulation of the tool slides. The plain lathes, and ones based on them, remained in the Kärger catalogue until at least the early 1950s - and possibly longer - at which point they had been nationalised by the East German communists under the banner of the huge WMW machine-tool organisation.
One important development for the company was the introduction, in 1892, of their first "precision leadscrew" models, the long-lasting DL Series. This came about as the result of  Dr. Loewenherz, the director of the Physikalisch-Technischen-Reichsanstalt in Berlin (the
P.T.R., an organisation similar to National Physical Laboratory  in the UK) introducing a metric thread system (flank angle 53°8`), for use in precision trades such as watch making and political production. Needing a suitable lathe on which to turn micrometer screws, female micrometer screws and taps and other items needed to launch the new thread-system the P.T.R. turned to Kärger. For threading purpose the DL1 had a special spring-loaded and lever-operated support, to prevent the work from bending. There was also a simple - but ingenious - eccentric-operated slide system that permitted a quick retraction of the turning-tool as the end of the job was reached. The Loewenherz thread-system was quickly supplanted, in 1888, by the present metric (SI) thread-system with a  flank angle of 60°.
During the middle years of the 20th century Karger's range developed to include more modern versions of the DL series, high-speed geared-head and production types and a range of unusual toolroom lathes with separate spindle-drive gearboxes in the base of their headstock-end plinths. The company exported their products world-wide both voluntarily, by normal commercial means, and after WW2 "involuntarily" when it is known that many, because of their high quality and durability, were seized as war reparations.  For example, in the just-post-war years at the Standard Telephones & Cables Company's radio workshops at New Southgate, England, there were 5 Kärger lathes of about 6-inch centre height that had been brought over from Germany in this way.
If any reader can provide more information about the Kärger company and its products the writer would be very interested to hear from you..

An early version of
the Kärger logo

A 1920 Kärger, both motorised and with a treadle-drive, still employed on
daily duties in the 21st century workshop of a German clock repairer.


The substantial Kärger works as they appeared at the end of the 19th century

Circa 1910/1930 Kärger with chase screwcutting. The system used on this lathe was particularly ingenious and employed the minimum number of parts.  Like many lathes of its type the front face of the Kärger  headstock pulley was fitted with circles of division holes--in this case a total of 12. The numbers are: 360, 168, 132, 102, 100, 96, 78, 54, 46, 38, 35 and 24. From these, using factors, it can be deduced that division into primes could also be made e.g.  38 =19 x 2, 46 = 23 x 2, 78 = 13 x 6, 102 = 17 x 6, 132 = 11 x 12. The primes could have been useful for locksmithing, codes or perhaps horology, where 29 and 31 might have proved handy to divide wheels for calendar motions - or for achieving various wheel ratios in a limited space. Detailed photographs of the Kärger screwcutting system can be found here.
Note, on the floor, the neat countershaft unit with its large central bearing and pulleys overhung at each side.

Almost the same Kärger as the colour photograph immediately above but fitted with treadle drive and much smaller micrometer dials


A plain-turning Kärger lathe but fitted with a backgeared headstock

Kärger lathe fitted with a non-sliding headstock spindle, chase screwcutting of a traditional design and a large cross-feed handwheel to aid rapid parting-off of production parts. Note the weight to keep the threading tool in contact with the work piece.


A more thoroughly-equipped production Kärger with chase screwcutting and a six-station turret head mounted on a rack-feed carriage

Kärger with a sliding headstock spindle lathe specially set up for high-speed milling and grinding operations


Unusually for the time, the Kärger had large and easily-read micrometer dials.
This example is probably one of the last made during the 1930s

A thick flat plate was dovetailed to the outside face pf the headstock and used to carry the thread chasing equipment. The section through which the headstock spindle passed was slotted to allow the plate to be moved up and down - by the action of a lever - and so engage and disengage the master thread and follower.

Chase threading equipment mounted on the headstock end plate. The headstock spindle carries the master thread whilst, in this picture, the lever has been lifted to engage it with the bronze star follower.


Headstock spindle extended fully forward showing the limit of its length threading capacity

Fine-pitch master threads and bronze star followers for the chase screwcutting. Note the coarse-pitch master for the generation of threads suitable for making spindle-mounted backplates.


1950s Precision Kärger Type DL1   1930s Kärger Type DL2   

1920s Screwcutting   Karger Sliding-spindle Chase Screwcutting   

Post WW2 Lathes   DL Lathes  Restored  Kärgers

Karger Miller

Kärger Lathes - Germany
email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories