Parts to fit BOXFORD and SOUTH BEND 9-inch and 10K lathes and "clones" by BOXFORD, SMART & BROWN, HERCUS, PURCELL, SHERATON and BLOMQVIST
All new items below are fine quality, British-made:

T-SLOTTED CROSS SLIDE
NEW HIGH-QUALITY, UK-MANUFACTURED T-SLOTTED CROSS SLIDES suitable for all South Bend and Boxford lathes of 4.5" and 5" centre-height. Ready to fit and use with gib strip and recessed degree scale. The design of the slide has recently been revised to improve its versatility and now includes a slot across the front - as well as three to the rear - and machined sides. The T-slots are spaced the same distance apart as those on a Myford lathe and thus the milling slide from maker can be used. These modifications allow the unit to be more easily used as a small boring table - and provide flat, vertical locations against which other items can be registered. The later type of "inset" rotational scale for the top slide is included, so the unit can be left on the lathe for regular operations as well. Fully machined and ready to fit. Your existing cross-feed screw and nut just transfer across. Another advantage of the slide its that, unlike the standard unit, it's a full-length type and so provides a more rigid platform for the top slide - as well as evening out way on the cross-slide ways.
Picture & dimensions here:  http://www.lathes.co.uk/boxfordtslottedcrossslide
UK delivery = £155 + £10 insured post and packing = £165 + 20% VAT = £38 = £198 total
EU Delivery = £155 + £35 insured post = £190 + 20% VAT = £228 total
International air-mail post = £155 + £75 air-mauil post  = £250 inclusive (no tax)
I was particularly impressed by the quality of the finish and detailing of the T-slotted slide. You have one very happy customer: John Bates, Australia.

Cross and Top Slide Feed Screws and Nuts:

NEW cross-feed bronze nuts - English or Metric thread £46 + £3 P + P  = £49 + 20%  VAT = £58.80

NEW cross feed screws for hand or power cross feed models: £67 + £3 P + P = £70 + 20% VAT = £84

NEW cross feed screw and nut together: £113 + £4 P + P = £117 + 20% VAT = £21.60 = £140.40 total

NEW top-slide bronze nuts £32 + £3 P + P = £35 + 20% VAT = £42

NEW top-slide feed screws £42 + £3 P + P = £45 + 20% VAT = £54

NEW top slide screw and nut together: £74 + £4 P + P = £78 + 20% VAT = £93.60

NEW Boxford/South Bend FIXED STEADY (Steady Rest) for 4.5-inch and 5-inch centre height models.
Top-quality, UK-made and a perfect fit. £145
NEW Thread-dial Indicator Thread-Dial Indicators: Inch Type = £95 - in stock
NEW Thread-Dial Indicators: Metric Type include adjustment block & 2 gears  = £105 -stock by October 2009
NEW Micrometer Carriage Stop. Fasten to bed and allow a precise setting to be made to the carriage travel £125

See below for changewheel lists 
Boxford/South Bend Tailstock
NEW tailstock barrels: £75 (can be supplied very slightly oversize for polishing to a fit)
NEW tailstock feed screws: £38
NEW tailstock feed-screw bronze nut: £19

Boxford/South Bend Changewheels, Tumble Reverse & Leadscrew
NEW Tumble Reverse gears: £26 Please note, if your Boxford is a Mk. 2 (with a backgear engagement lever on top of the headstock you need to mention this when ordering)
NEW fibre Tumble Reverse gears for the Boxford ME10 (type that accepts a bronze bush or needle-roller bearing of either 7/8" or ¾" diameter. £26
NEW CLASP NUTS for the leadscrew - inch or metric: £85

Boxford/South Bend Cross and Top Slide Screws, Nuts & Dials
NEW cross-feed bronze nuts - English or Metric thread £46 (note: for models fitted with taper turning a 2-bolt "rectangular" nut without a locating boss was used)
NEW top-slide bronze nuts £34
NEW cross feed screws for hand or power cross feed models: £67
NEW top-slide feed screws £42
NEW Micrometer Dials - metric or inch: £45
New T-bolt for top slide £14 (centre drill marked but not tapped - tap to your requirements)

Boxford/South Bend Backgear Assemblies
BACKGEAR shaft ASSEMBLIES (often damaged but easy to repair):
if the small gear on your back shaft is damaged, pull off the large gear and send the rest for a service exchange. For both rear and under-drive models:
- fitted with new small gear: £65
- replacement large gear (no need to send shaft, the gear just pulls off
- fitted with both large and small gears £130
- small main-spindle gear (fits on main spindle and has 2 pins into end of drive pulley) £37
- main spindle gear repaired with a new ring of teeth £75
- also available for South Bend and Boxford, Hercus, etc.-a RING GEAR to repair the main spindle Bull Wheel. Machine off the damaged teeth and shrink or Loctite the new gear in place. £55

FACEPLATES: 200 mm (8-inch) faceplates properly-made in cast iron Fully-machined and ready to screw on  - £65
BACKPLATES: heavy-section 162mm (6.3-inch) diameter backplates. Properly-made in cast iron in the UK. Fully-machined and ready to screw on - £49
BACKPLATES for the L00 spindle nose as used on some VSL Models. 7-inch diameter. £127
NEW T-Link (Brammer) sectional belting for all Underdrive and rear-drive Models CUD, BUD and CUD £53,20 including post, packing and VAT Usually 1.4 metres is require -can be supplied for other models as well.

CHANGEWHEELS to fit Boxford 4.5" and 5" lathes and South Bend "9-inch", "Light Ten" and all other South Bend clones. All are British-made from top-quality materials:
All models of Boxford (with either changewheel or gearboxes) can generate either inch or metric threads with the appropriate conversion changewheels in place.

16T, 18T, 20T, 21T, 22T, 23T, 24T, 26T, 27T, 28T each:  £18
30T, 31T, 32T, 34T, 35T, 36T, 37T each:  £20
38T, 40T, 41T, 42T, 44T, 45T, 46T, 48T, 49T each:  £25
50T, 52T, 53T, 54T, 55T, 56T, 57T, 58T, 59T, 60T, 62T, 64T each:  £29
66T, 68T, 70T, 71T, 72T, 75T, 76T, 78T, 79T each:  £37
80T, 82T, 88T each:  £42
80T idler with boss £48
90T, 95T, 96T, 100T each:  £59
101T, 108T, each:  £79
127T, 130T, 135T each: £88
100/127T compound gear (English to metric conversion with bushed centre):  £89
127/135T compound gear (Metric to English conversion):  £98
54/18T compound gear:  £53
72/18T compound gear:  £57
48/24 compound gear: £58
64/54t compound gear: £64
76/65t.compound gear: £78
TUMBLE REVERSE GEAR (32t) £22
For overseas delivery gears are plus 38% air-mail post