Lathes.co.uk - Machine
Tool
Catalogues, Sales & Technical Specification Literature
This page is catalogues only - for
Technical Manuals and Parts Lists click here
Only a fraction of our catalogues is listed; for data
about a specific machine phone: 01298-871633 or e-mail: tony@lathes.co.uk
Always wanted - individual or quantities of
machine-tool literature of all kinds. Please phone: 01298-871633 or e-mail: tony@lathes.co.uk
ORDER DIRECT ONLINE IN MOST CASES BY ADDING THE CATALOG STOCK CODE AS A SUFFIX TO THIS WEB ADDRESS: https://store.lathes.co.uk/print/ e.g. https://store.lathes.co.uk/print/A450
If this does not work the manual might not
be listed online in which case just phone 01298-871633 or, from overseas ++44-1298-871633 from the USA and Canada 011-1298-871633 or email tony@lathes.co.uk
All our publications are
high-resolution scans, cleaned and post-scanned prepared, printed on top-quality120g
paper to preserve as much detail as possible and bound with a clear cover and
card back:
.........I want to congratulate you on the high quality of the material. I have
not seen better copies or binding anywhere, and I appreciate it! A lot of time,
effort and skill must have been spent to get such high-quality reproductions. Best regards, John Coobick.
Prices are plus £3.50 UK first-class postage
and packing. Overseas post is +20%. Minimum overseas postage charge £5. Click here for full ordering instructions
A10 AGATHON Tool Grinding and Lapping Machines Models 150-A, 175-A & 175AR. Sales & Technical Specification Catalogue. 8 pages.
A10A AGATHON 150SL Centreless Grinder for close tolerance grinding of small and miniature parts. sales, Technical Spercification and Explantory CATALOGUE
A18
"AMERICAN" (American Tool Works) Tool Room Lathes Sales and Technical Specification Catalogue 1928. Beautiful illustrations
together with 6 pages explaining the workings of the relieving attachment, and many other
detailed descriptions of the machines' construction and operation. Covers the 12", 14",
16", 18", 20", 24"GP, 24" HP and 27" models. 30 pages
A18A
"AMERICAN" (American Tool Works) 30-inch Lathe Sales and Technical Specification Catalogue 1933. 4 pages
A18B
"AMERICAN" (American Tool Works) 12-inch Lathe. Two Sales and Technical Specification Catalogues showing the lathe as it developed
from the 1920s to the 1930s range with both flat-belt dtive and geared-head machines covered. 8 pages
A18C
"AMERICAN" (American Tool Works) Pacemaker Lathes. Range Catalogue Showing the Models 14", 16", 20" MD & 20"
HD 1949 42 pages
A18D
"AMERICAN" (American Tool Works) Pacemaker 32-inch Lathe Sales and Technical Specification Catalogue 1958 30 pages
A18E
"AMERICAN" (American Tool Works) Super Productive 42-inch Lathe Sales and Technical Specification Catalogue 1958 (Wonderful pictures) 22 pages
A18F "American" (American Tool Works) "Auto-Oiled" Shapers with strokes of 20", 24", 28", 32" and 36". Detailed and Well-illustrated Sales and Technical Specification Catalogue dated 1931. 24 pages.
A18G "American" (American Tool Works) Multi-Production Lathe. Detailed and Well-illustrated Sales and Technical Specification Catalogue dated 1932. 16 pages.
A100 ABENE Universal Milling Machines VHF-3 TNC Sales & Technical
Specification Catalogue 6 pages
A100A ABENE Universal Milling Machines. VHF-3 Modern and older Models. Two Sales and
Technical Specification Catalogues 12 pages
A100C Abene VHF-2B older model Sales and Technical Specification Catalogue 4
pages
A100D Abene VFH-3U Sales and Technical Specification and Technical
Specification Catalogue. 2 pages
ABWOOD - as well as the ones listed below we have many others - please enquire: 01298-871633
A150 ABWOOD Precision Tool and Die Surface Grinders Types SG1A, SG3H, SG4H.
Two comprehensive, very well-illustrated Technical Sales, Specification and
Accessories Catalogue. 32 pages.
A150A ABWOOD 5025 Surface Grinder. Technical Sales, Specification and
Accessories Catalogue. 12 pages.
A150B ABWOOD Sizematic Model SH1H, SG1A, SG3H, SG3, SG4H/HS and SG4H (and variants). Vertical Spindle Surface Grinders. Complete, detailed Catalogue Collection: Technical Sales, Specification and
Accessories. 32 pages.
A150C ABWOOD RT-300 Rotary Table Grinding machine. Technical Sales, Specification and
Accessories Catalogue. 4 pages.
A150D ABWOOD TG-170, TG-170/CB, CG-3A/CB Tool Grinders. Technical Sales, Specification and
Accessories Catalogue. 4 pages.
A150E ABWOOD CG1A, CG2A and CG3A Tool Grinders. Two Technical Sales, Specification and
Accessories Catalogues. 6 pages.
A150F ABWOOD Production Surface Grinder Model ASG2 Technical Sales, Specification and
Accessories Catalogue. 2 pages.
A150G ABWOOD "Concentre" Carbide Tool Grinding and lapping machine with Chip Breaker Attachment. Technical Sales, Specification and
Accessories Catalogue. 6 pages.
A150H ABWOOD RG1 Series Horizontal Rotary Table Surface Grinding machines. Two Technical Sales, Specification and
Accessories Catalogues. 16 pages.
A150J ABWOOD Double-wheel, floor-standing carbide-tool grinding machines. Four Technical Sales and Specification
Catalogues covering the entire range from first to last. Includes the first two very early models and
then the Concentre in C.G.2, C.G.3 forms,the C.G.2A, C.G.3A, C.G.1A, C.G.0, C.G.2/CB, C.G.3A/CB, C.G.2A/CB, C.B.2P, TG-170 and finally the last made, the TG-170CB and CG-3A/CB.
38 well-illustrated and highly-detailed pages
A200A ACIERA Complete Production Programme Catalogue 1983. Includes milling and drilling machines and co-ordinate drilling machines, tappers, etc. F1, F3,
F5, F5EP, F1N, F1H, F3H, F1-CNC, F5-CNC, Servo 7150, ET-3, ET-6,ET-13, ET-22,
22-TR-33, 23-TR-50, 23-TR-52, 6-T1, 13-T1, 22-S2/1, 6-K4, 13-K4, 22-S6, 22-STA,
23-ST-40, 23-ST-42, 22-TNC, 23-TNC, 23-CNC, 25-CNC, NC-30. 20 pages.
A200B ACIERA Complete Production Programme Catalogue 1980. Includes Includes milling and drilling machines and co-ordinate drilling machines, tappers, etc.: F1, F3,
F5, F5-EP, F1N, F1H, F3H, F4H, F1-CNC, F5-CNC, Servo 7150, ET-3, 22C, 6T1,
13T1, 22-S2/1, 6K4, 13K4, 22S6, ET6, ET13, ET22, 22-TR-33, 23-TR-50, 23-TR-52,
13KT, 22-STA, 23-STA, 23-TNC, 23-NC, 25-NC, G5, NC-30. 20 pages.
A200C ACIERA F1 Precision Universal Miller: Technical Sales, Specification and
Accessories Catalogue. 16 pages.
A200D ACIERA F1 CNC Milling Machine. Detailed Technical Sales, Specification
and Accessories Catalogue. Includes Technical data for the Aciera 2100/2CNC
controller, Manual Programming description, etc. 32 pages.
A200E ACIERA F3 Precision Universal Miller: Late Technical Sales, Specification
and Accessories Catalogue for machines with angular styling, circa 1990. 16
pages.
A200F ACIERA F3 Precision Universal Miller: Early Technical Sales,
Specification and Accessories Catalogue for machine with rounded styling, circa
1958 16 pages.
A200G ACIERA F4 Precision Universal Miller early "ROUNDED-STYLE"
model: Sales and Technical Specification Sheet with every accessory listed
and illustrated. 16 pages.
A200H ACIERA F4 Precision Universal Miller LATE "ANGULAR-STYLE"
model: Sales and Technical Specification Catalogue with every accessory
listed and illustrated. 32 pages.
A200J ACIERA F5 Precision Universal Miller: Sales and Technical Specification
Catalogue with every accessory listed and illustrated. 32 pages.
A201 ACIERA Type 22 Precision Drilling and tapping machines. Full-Range Sales
and Technical Specification Sales and Accessories Catalogue. 20 pages.
A201A ACIERA 22-STA Boring and Milling Machine: Sales and Technical
Specification Catalogue. 11 pages.
A201B ACIERA 22-STA, 23-ST-40, 23-ST-42 and 23-TNC Precision Co-ordinate
Boring and Milling Machines. Sales and Technical Specification Catalogue.
32 pages.
A201C ACIERA 22-TRA Production Drilling machine. Sales and Technical
Specification Catalogue. 4 pages.
A201D ACIERA Type 13 Precision Drill: Sales and Technical Specification
Catalogue. 5 pages.
A201E ACIERA Type 7150 Precision Drilling Machine. Sales and Technical
Specification Catalogue. 2 pages.
A201F ACIERA Type 6 Drilling and Tapping. Sales and Technical Specification
Catalogue. 2 pages.
A201G ACIERA ET-3 Tapping machine. Sales and Specification Sheet. 1 page.
A350A ACORNTOOLS capstan lathe (a re-badged Atlas by Halifax) 2 Sales and
Technical Specification Catalogues. 8 pages
A350B ACORNTOOLS 5-inch centre height lathe (Atlas Clone by Halifax) Sales
and Technical Specification Catalogue. 8 pages
A350C ACORNTOOLS Shaper (Atlas Clone) Sales and Technical Specification Catalogue.
7 pages
ADAMS - GEORGE ADAMS - See below under "George Adams"
MA405
Adcock & Shipley No.0 Miller ALL TYPES - a complete collection of data covering the ordinary screw-feed types
and: 0C, 0A, 0A1, 0A2, 0A3, 0AD, 0C, 0C1, 0C2, 0C3, 0CD,0B, 0D, 01, 02, 03, 0B1, 0B2,
0B3, 0BD: Sales & Technical Specification Catalogue 22 pages
A406 ADCOCK and SHIPLEY Milling Machines from the 1930s and 1940 Horizontal and Vertical Types: No.0, No.1, No.2, No.2AG and No.3
Models. 36 pages
A406A3 ADCOCK and SHIPLEY No.3 Milling Machine from the 1940s (Large speed-change dial on the right-hand face of the column)
Sales and Technical Specification Catalogue with annotated pictures of the control levers and their functions. 8 pages
A406A ADCOCK and SHIPLEY (By Ryder) Universal Machine Tool - a remarkable machine that combines a lathe, milling machine,
universal grinder, twist-drill grinder and a drill press. Two Sales and Technical Specification Catalogues showing both the smaller and larger models. 12 pages.
A406B Adcock and Shipley: General Catalogue: Millers 18 pages
A406C Adcock and Shipley: full-range Catalogue: Drills 1930/39 40 pages
A406D Adcock and Shipley No.0 Miller: All types: 0C, 0A, 0A1, 0A2, 0A3, 0AD,
0C, 0C1, 0C2, 0C3, 0CD,0B, 0D, 01, 02, 03, 0B1, 0B2, 0B3, 0BD: Sales and
Technical Specification Catalogue 18 pages
A406D Adcock and Shipley No.1 Miller all Types: 1, 1A, 1AD, 1AA, 1AB, 1AD,
1B, 1C, 1D, 1E, 1F, 1M, 1N, 1P, 1H, 1G, 1H, 1J, 1AGU, : Sales and Technical
Specification Catalogue 12 pages
A406Ev Adcock and Shipley No.2 Millers: Plain and Swivelling Head vertical Type: 2VSB,
2VSF, 2VSE and 2VR, etc: Detailed and well-illustrated Sales and Technical Specification Catalogue Collection. 20 pages
A406Eh Adcock and Shipley No.2 Millers Horizontal Type: 2D, 2B, 2C, 2D, 2E,
2F, 2G, 2H, 2AG, Sales and Technical Specification Catalogue 8 pages
A406F Adcock and Shipley 2AG and 2AGU Millers: Sales and Technical Specification Catalogue. 8 pages.
Sheet
A406G Adcock and Shipley Model "0" Automatic Cycle Miller: Sales
and Technical Specification Sheet 1 page
A406H Adcock and Shipley 3HG Miller: Sales and Technical Specification
Sheet 1 page
A406J Adcock and Shipley 3HG/4HG Millers: Sales and Technical Specification
Sheet 1 page
A406K Adcock and Shipley Model "I" Horizontal Miller: Sales and
Technical Specification Sheet 1 page
A406L Adcock and Shipley Model 2JR Horizontal Miller: Sales and
Technical Specification Catalogue 8 pages
A406M Adcock and Shipley Model "SV140" Radial Drilling and Tapping
Machine 8 pages
A406N Adcock and Shipley Model "2VS" Swivel Head Vertical Milling
machine: Sales and Technical Specification Catalogue 8 pages
A406P Adcock and Shipley Milling Machines Accessories Catalogue. 20 pages
A406Q Adcock and Shipley No.4AG Miller: Sales and Technical Specification
Catalogue 4 pages
A450 ADEPT and "Super Adept" Lathes:
A complete data pack of all known literature: 3 Sales & Technical
Specification sheets together a detailed 11-page Catalogue produced
by the American Distributer and 2 pages on the Adept Shaper.
A500 AGATHON (Switzerland) 175-AR, 175-AV, 175-AVL, 175
Model B Precision Grinding Machines. Sales and Technical Specification and
Accessories Catalogue. 4 pages.
A550 AJAX Machine Tools. AJAX were not manufacturers but importers and
distributors who badged machines as their own. Many different kinds were sold
and the best publication for reference is the AJAX Main Catalogue showing:
Cleveland Millers, Cleveland "A" Range, Turret Millers, Production
Milling Machines, smaller hand-operated small horizontal Millers, Milling
machine heads and Accessories, Slotting machines, Drilling Machines, Shaping
Machines, Metal Saws, Pillar and Bench Drills, Radial Arm Drills, Work Heads.
etc. 64 pages.
A550A AJAX 00 Universal Precision Milling Machine. Sales and Technical
Specification Catalogue. 2 pages.
A550B AJAX No. 1 Milling Machine. Sales and Technical Specification
Catalogue. 4 pages.
A550C AJAX AJ8, AJ8-P and AJ9 Horizontal Milling Machines (small model, hand
operation. Motor drive by V-belts up the rear of the main column). Two Sales
and Technical Specification Catalogues and a price list. 11 pages.
A550D AJAX AJT1-R8 Turret Milling Machine. Sales and Technical Specification
Catalogue. 4 pages.
A550E AJAX AJT2, AJT3 and AJT4 Milling Machine. Sales and Technical
Specification Catalogue. 16 pages.
A550F AJAX AJT4 Milling Machine. Dedicated, detailed single-model Sales and Technical
Specification Catalogue. 10 pages.
A550G AJAX Milling Machines Models 2A, 2RH, 4A and 4RH.
Sales and Technical Specification Catalogue. 4 pages.
A550H AJAX AJRH-1800 and AJRH-2000 Overhead-Ram Type Milling Machines. Sales
and Technical Specification Catalogue. 4 pages.
A550J AJAX Bed-type milling machines Models AJBM1600, AJBM2000, AJBM2600 and
AJBM3250. Sales and Technical Specification Catalogue. 8 pages.
A550K AJAX AJ-1120B and AJ-1370B Universal Milling Machines. Sales and
Technical Specification Catalogue. 4 pages.
A550L AJAX AJ-1325R and AJ-1525R Universal Milling Machines. Sales and
Technical Specification Catalogue. 4 pages.
A550M AJAX No. 0, 1, 2, No. 3, No. 4, No. 4L and No. 5 Cleveland Milling
Machines. Sales and Technical Specification Catalogues covering the early and
late models. 28 pages.
A550N AJAX AJ340 CNC Series 2 Vertical Milling machine. Sales and Technical
Specification Catalogues covering the early and late models. 6 pages.
A552 AJAX Lathes AJ.150, AJC.150, AJC165, AJ.210, AJ250, AJ.285 and AJ.400.
Sales and Technical Specification Catalogues. 24 pages.
A552A AJAX AJC150 lathe. Sales and Technical Specification Catalogues. 4 pages.
A552B Ajax Lathes AJ240, AJ270 and AJ400. Detailed and beautifully illustrated Sales, Technical Specification
and Accessories Catalogue. 16 pages.
A608 ALBA (Elliott) 10M Shaper Sales and Technical Specification Catalogue 4
pages.
A608A ALBA (Elliott) Model 6S Shaper: Sales and Technical Specification sheet
2 pages.
A608B ALBA (Elliott) Model 2S Shaper: Sales and Technical Specification sheet
2 pages.
A611 ALEXANDER Master Toolmaker Universal Miller: Two Sales and Technical
Specification Catalogues. 14 pages
A611A Alexander Die-Sinking and Engraving Machines. Detailed General Sales
and Technical Specification Catalogue (Identical to the Deckel Models) but
also contains useful operating data, charts and details of accessories and how
to mount them. 25 pages
A611A Alexander 3A and 1B Die-Sinking and Engraving Machines. Detailed Sales
and Technical Specification Catalogue with useful operating data, charts and
details of accessories and how to mount them. 20 pages
A611A Alexander 4HB and 5HB Automatic Die-Sinking and Copy Milling. Detailed
Technical Sales Specification Catalogue 20 pages
A611A Alexander 4HA, 4HB and 4HC Automatic Die-Sinking and Copy Milling.
Detailed Technical Sales and Specification Catalogue 16 pages
A617 ALG 100 Universal Precision Milling Machine (Deckel Copy made in CZ by
Prvomajska). Superb Sales and Technical Specification and Accessories
Catalogue. 20 pages.
A660 Alfredo (Tomasi Alfredo) "Deta" Milling Machine Sales & Specification Catalogue. 4 pages.
A680 ALLANSON Precision Lathe (UK) Sales and Specification sheet. 2 pages.
A690 Almhults (Sweden) Shapers 10-inch and 28-inch. Sales and Specification Catalogue. 4 Pages
A770 AMERICAN WATCH TOOL COMPANY - Webster Whitcombe. Superb early 1900s
31-page All-models and Accessories Sales Catalogue. (Also, for literature
about these lathes developed, look under the WADE entry - the company that took
the watch tool Co.)
A770A AMERICAN WATCH TOOL COMPANY - Webster Whitcombe and Moseley models Superb
1910 Watchmakers' Lathes Catalogue and Price list. 12 pages. (Also, for
literature about these lathes developed, look under the WADE entry - the
company that took the watch tool Co.)
A780F AMES-STARK Machine Tools 1950s. A collection of catalogs and sales sheets
showing the entire range of machines and accessories available
during the 1940s and 1950s including the Series 400 Precision Lathe
(on underdrive stand), Stark Model 2
Precision Lathe, Milling Machines, Stark Model 3 ½ Precision lathe, the
STARK-AMES Model EH-3, Screw machines, Stark Integral Drive Bench Lathe,
various versions of underdrive stands
both wood and metal, a “Precision Bench Lathe Attachments” Catalogue
and details of the variable-speed
drive unit by The Master Electric Co, Price Lists and two letters
from the
Company. 85 pages. First-class, high-resolution production.
A780X Ames Precision Machine Tools: a set of four early catalogs that cover the
complete range of the first Ames models:
(1) "Bench Lathe and Fixtures" very early landscape-format Catalogue with wonderful, art-worked photographs showing the lathe, its accessories - and the Ames Milling Machine. 49 pages
(2) Booklet "The Bench Lathe at Work" - 1925: 31 pages
(3)Ames "Bench Lathe and Bench Millers" 1926 portrait-format Catalogue showing the lathe, its accessories - and the Ames Milling Machine. Includes a price list and a letter from the factory. 16 pages
(4) Precision Machinery for Bench Use - 1930: Lathes and Attachments, Milling Machines and Attachments, Tapping and Drilling Machines, Filing Machines". 31 pages
A780Y Ames Precision Machine Tools: a set of three later
catalogs:
(1) Ames No. 3 Precision Bench lathe Sales and Technical Specification
Catalogue. Also shows the Ames miller and Ames Triplex Machine - a lathe and
miller combined. 16 pages.
(2) Ames Model EH-3 variable-speed drive model on underdrive
stand (also badged as a Stark No. 4) Sales and Technical Specification
Catalogue. 6 pages
(3) Ames/Stark Lathes and Accessories Sales and Technical Specification
Catalogue showing the enclosed, variable-speed drive headstock. This particular
lathe is shown dual-badged as both Ames and Stark. 6 pages.
A780B Ames "Triplex" No. 1 "3-in One"
machine tool (by Ames, USA). Sales and Technical Specification Catalogue. 6
pages.
A784 AMC (AMC Maskin Co.) Connecting Rod Boring Machine Model CRB-150 and CRB-150A. Sales & Technical Specification Catalogue. 4 pages
A786 ANAYAK FV-1, FV-2, FV-2V and
FV-1T2 Turret Milling Machines. Sales and Technical Specification Catalogue.
12 pages.
A786A ANAYAK FV-3, FV-4, FV-3T2 and FV-3U Turret Milling Machines. Sales and
Technical Specification Catalogue. 12 pages.
A786B ANAYAK Vertical Milling Machines. Full-range catalogue circa 1970/80.
Includes details of the: FV-1, FV-2, FV-3, FV-4, FU-205 and the ANAK-MILL-12 as
well as their various sub-models. English, French, German and Italian text. 10
pages.
A786C ANAYAK Vertical machining Centres: ANAK-MATIC 2.000, ANAK-MATIC 6CNC and
ANAK-MATIC 8CNC. Sales and Technical Specification Catalogue 1988. 20 pages.
A786D ANAYAK General Catalogue 1988 giving brief details of: ANAK-MATIC 6CNC,
ANAK-MATIC 10CNC-4, Model.H-400, Model CNC-1080, Model.H-500 Multipallet,
Model. FV-4, Model V-20, Model VH-1800 and the Model ANAK MILL-12. 4 pages.
A790 AMOLCO MILLING ATTACHMENT (as used on Myford and other small lathes) and
Amolco self-contained vertical miller. Sales and Technical Specification
and Technical Specification Sheet. 2 pages.
A822X Arboga Drills. Full Catalogue Set all types from early to the late 1990s. Includes the models: E100, EB100,
EB100S, E100S, E108, E135, E825, EB825, E830, EST830, ER125, ER125S, ER825, ER830 Radial, ER830
Conventional, Ganged sets EBF103S, EF104S, EF102S, B2508, BM2508, G2509, GM2508, GL2508, GL2512,
B2512, BM2512, G2512, GM2512, U2508, GM830, GM3512, G3M3512, G4M3512, RM3512, RLM3512, ER1830,
ER830, B/22508, B4/2508, B3M2508, G2/2508, G4/2508, G2M2508, G3M2508, G2M3512, G4M3512, A4008U(M),
AR4008(L), A4008M, A3008, A2508U, B2508, B2512, BM2508, BM2512, G2508, G2512, GM2508, GM2512, G2508,
G2512, GM2508, GM2512, GL2508, GL2512, GSM5012, GM5012, GSMK5012, RLM3508, RM3508 and
Accessory Sheets including the Hardclipper Plate Shear and Reduction Gearboxes RVS and RV-12.
28 catalogues with 104 pages
A822 ARBOGA UM400 Miniature Miller/Driller/Slotter/Shaper/Grinder. Sales and
Technical Specification Catalogue. 4 pages,
A822A ARBOGA EM825 Vertical Miller/Driller. Sales and Technical Specification
Catalogue. 4 pages,
A822B ARBOGA U2508 Vertical Miller/Driller. Sales and Technical Specification
Catalogue. 6 pages,
A822C ARBOGA E135, E830, EST830 Drilling Machines. Geared Head. Sales and
Technical Specification Catalogue. 6 pages,
A822D ARBOGA 830 Drilling Machines. Geared Head. Sales and Technical
Specification Catalogue. 2 pages,
A822E ARBOGA 2508 - 2512 Drilling Machines. Geared Head. Sales and Technical
Specification Catalogue. 8 pages,
A822F ARBOGA 3512 Drilling Machines. Geared Head. Sales and Technical
Specification Catalogue. 6 pages,
A822G ARBOGA RLM 3508, RM3508, ER 125, ER 125S, ER825 radial Arm Drilling
Machines. Sales and Technical Specification Catalogue. 4 pages,
A822H ARBOGA A3008 Drilling Machines. Sales and Technical Specification
Catalogue. 4 pages,
A822J ARBOGA A4008 U(M) Column-type Drilling Machine. Sales and Technical
Specification Catalogue. 4 pages,
A822K ARBOGA A4008 M Drilling Machine. Sales and Technical Specification
Catalogue. 4 pages,
A822L ARBOGA AR4008 (L) Radial Arm Drilling Machine. Sales and Technical
Specification Catalogue. 4 pages,
A822M ARBOGA U1 Drilling Machines. Sales and Technical Specification Sheet. 4
pages,
A822N ARBOGA E-EP-BEP Grinding Machines. Sales and Technical Specification
Catalogue. 2 pages,
A822P ARBOGA E-EP-BEP Grinding Machines. Sales and Technical Specification
Catalogue. 2 pages,
A822Q ARBOGA UM400 Multi-funtion machine. Sales and Technical Specification
Catalogue. 16 pages,
A823 ARBOR CM-110-140 Multi-function Machine. Sales and Technical Specification
Catalogue and price list. 8 pages.
ARCHDALE - a vast collection of literature is available. Please phone:
01298-871633 or e-mail your requirements to :tony@lathes.co.uk
A824 "Archdale Machine Tools 1868 - 1948" A
company history. 99 pages.
A824G ARCHDALE Comprehensive, beautifully-illustrated full-range Catalogue
Circa late 1940s to the 1950s showing milling machines, a wide variety of drills, horizontal and vertical
milling machines,thread and cam milling machines, milling machine accessories and "special machines" 152 pages.
A824A ARCHDALE Drills. Full-range Catalogue circa 1914. 48 pages.
A824B ARCHDALE MILLERS. Full-range Catalogue 1914. 48 pages.
A824C ARCHDALE VERTICAL MILLERS. 24", 28", 30" and 34".
Sales and Technical Specification Sheets. 40 pages.
A824D ARCHDALE HORIZONTAL MILLERS. 18", 24" and 28", Sales
and Technical Specification Sheets. 36 pages.
A824E ARCHDALE No. 2 Milling Machines. Sales and Technical Specification
Catalogue. 26 pages.
A824F ARCHDALE Full-range Catalogue Circa 1930s-1940s: Radial-Arm drills, Heavy-duty
drills, Production drills, Multi-head drills, All-gear Drills, Sensitive
Universal Adjustable Multi-spindle Drills, Medium and Heavy-duty Type Universal
Multi-spindle Drills, Hydraulic Multi spindle drills, 6-spindle cylinder boring
machine, 4-spindle Fixed centre Hydraulic Cylinder Boring Machine, 74-spindle
Vertical Hydraulic Drill, Automatic Cam Feed Unit Drilling Machines, Duplex
Hydraulic Piston Drilling and Reaming Machines, 18-inch, 20-inch, 28-inch,
horizontal Milling Machines, 24-inch Automatic production Milling Machine,
36-inch, 48-inch and 54-inch Duplex Automatic Manufacturing Milling Machines,
18-inch, 24-inch and 30-inch Vertical Millers, Automatic Horizontal Cam and
Profile Milling Machine, Motor Driven Thread Milling Machine, etc. 65 pages.
A824H ARCHDALE Full-range Catalogue 1952: 55 pages - contents much as above.
A824J ARCHDALE Staveley Drill Grinding and Drill Point Thinnings Machines. Four detailed Sales & Technical Specification Catalogues showing the whole range from oldest to youngest. 16 pages.£20
A824J ARCHDALE Drill Grinding and Drill Point Thinnings Machines. Four detailed Sales & Technical Specification Catalogues showing the whole range from oldest to youngest.
16 pages.
A825Z ARISTOS IMAMI Turret Lathes Types A16, N16, TRP8 and TRP16. Sales, Specification, and Accessories Catalogue
with price lists. 4 catalogue pages and 7 pages of prices.£16
A825KK ARKARDIA Hand-operated Surface Grinder. Catalogue. 2 pages
A826 ARMOR (USA) Universal Turret Milling Machine Sales and Technical
Specification Catalogue. 6 pages.
A825 ARNO and NOMO Milling Machines. catalogue collection covering the "Dial Type" Model 0, M1, V.1,
1A, 1AR, 2R, 1VR, 1V, 2V, 3V, The HD models in sizes No. 2, No. 3 and No.4, the powered overarms and all the other many accessories.
68 pages.
A828 ARUNDEL. Compendium of all known data including Sales and Specification
Catalogues for the Models K, K450, K450HD, K600, M230, M300, J3, J4, E5 (a complete 6-page catalogue), E5R, A
Test Review of the M230 lathe and details of other equipment factored by the
company.54 pages. .
A830 ASEA (Sweden) Jig Borers Types SJ and SJB. Two Sales and Technical
Specification Catalogues, one early the other late. 24 pages.
A832 ASQUITH OD1 and OD Radial-arm Drills: Technical Sales and Technical
Specification Catalogue.24 pages.
A832A/MA185F ASQUITH POWER THRUST RADIAL DRILLING MACHINE: Not a Manual but a
very comprehensive and useful Technical Sales and Technical Specification
Catalogue with descriptions of the mechanisms, some sectional drawings and
annotated control charts.
A832B ASQUITH DRILLS Catalogue. Vast range of drills from Workshop to Titanic.
Beautiful factory illustrations as well. 136 pages.
A832C ASQUITH DRILLING and TAPPING UNITS: Sales and Technical Specification
Catalogue. 17 pages.
ASTRA - these were imported machines branded by Scot Urquhar for the British
market. We have a large collection of all types. If yours is not shown below,
please enquire.
A834 ASTRA Milling Machines: Models: F1, F2, L1, L2, L4, "Plain
Miller" (horizontal), Type "0" and Type CM-60. Sales and
Specification Catalogues covering the complete range. 22 pages.
A834A ASTRA Slotting machines 6-inch, 8-inch and Models 90, 110, 240 and 360.
Sales and Specification Catalogues. 12 pages.
A838 ATLANTIC (USA) Milling Machine. Sales and Technical Specification
Catalogue 3 pages.
A840 ATLAS (USA) Lathes Catalogue No. 5 (very early - 1932) showing the new
9-inch "all-belt" drive lathe and accessories. 11 pages.
A840A ATLAS Lathes full-range Catalogue No. 8 (1934) including the 9-inch
"all-belt" drive lathes, the first of the later 10-inch models with
backgear, the cheaper "Unit Plan" lathes, the first wood-turning
lathes, the company's drills, presses and pictures inside the factory. 32
pages.
A840B ATLAS Lathes full-range Catalogue No. 15 (circa 1936) with metal and
wood-turning lathes including the later 9-inch "all-belt" drive
machines, the Model 918 "Utility" Model, the revised 10-inch Model,
"Unit Plan" versions, accessories, wood-turning lathes, drills,
presses and motors. 44 pages.
A840C ATLAS Lathes full-range Catalogue No. 26 (dated 1936/1937). The first of
the comprehensive Atlas catalogs illustrating the last 9-inch
"all-belt" drive lathes together with the Utility versions; 10-inch
screwcutting Models and the cheaper Unit Plan versions; wood-turning lathes;
drills, presses, vices, motors and accessories. 52 pages.
A840D ATLAS Lathes full-range Catalogue No. 28 (November 1937) with lathes,
millers, shapers, drills, etc.: 52 pages.
A840E ATLAS Lathes full-range Catalogue No. 31 (circa 1938) with lathes,
millers, shapers, drills, presses, vices, motors and accessories. 70 pages.
A840F ATLAS Lathes full-range Catalogue No. 39 (January 1939) with millers,
shapers, drills: 70 pages
A840G ATLAS Lathes full-range Catalogue No. 40 (1940) with millers, shapers,
drills: 70 pages
A840G2 ATLAS Lathes full-range Catalogue No. 41 (1941) with millers, shapers,
drills: 64 pages.
A840H ATLAS Lathes full-range Catalogue No. 45 (1945) with millers, shapers, drills:
64 pages.
A840J ATLAS 10" Lathe Quick-change Gearbox: Special Catalogue (1947) 12
pages.
A840K ATLAS Lathes full-range Catalogue No. 50 (1950) with millers, shapers,
drills: 35 pages
A840L ATLAS Lathes full-range Catalogue No. M52 (1952 to 1958) with 1954 price
list and millers, shapers, drills:
A840M ATLAS Lathes Catalogue No. 3990 with the 12" and 6" New Model
Lathes (1959). 16 pages.
A840N ATLAS Lathes Catalogue No. 5993-1 with the 6" and 12" New Model
lathes having the changed apron control; circa 1967: 16 pages.
A840P ATLAS Lathes Catalogue No. 300 12" New Model lathe having the
changed apron control. 6 pages.
A841 Atlas 6-inch Lathe. Special Catalogue 1938 -1970 model. 8 pages.
A841A Atlas 6-inch Lathe. Mk. 2 1970s "Squared" design model. Special
Catalogue. 10 pages.
A843 Atlas Metal-cutting Equipment Catalogue No. 6993-2 of 1974 with lathes and
saws. 10 pages.
A844 Atlas 8" and 10" Tilt-arbor Bench Saws Catalogue No. 8-10S
(circa 1950s) 8 pages.
A845 Atlas Woodworking Machines Catalogue SH54 circa 1954 with saw benches,
bandsaws, jig saws, drills, grinders, wood lathe. 4 pages.
A846 Atlas Bandsaw Catalogue with speed-reducer details. 2 pages.
A847 Atlas Shaper Catalogue No. 30. 1st edition, 1938. Lovely illustrations.
Includes the shaper pages extracted from later Catalogues as well. 8 pages.
A848 Atlas Milling Machine Catalogues. Consists of extracts from the General
Catalogues showing all versions of the miller, detailed specifications, the
extensive accessory range, accurate descriptions of the construction, parts,
controls and optional extras. 20 pages.
A849 Atlas Wood-lathes Catalogue 8 pages
MA755 ATLAS and Craftsman Drill Presses: a beautifully printed compendium of Atlas
and Craftsman drill presses extracted from 30 years of catalogs spanning 1931
to the 1950s. Through the 1950s the range of Craftsman drill presses remained
basically unchanged until withdrawn late in that decade. Includes the rare
Instructions "How to Use a Drill Press". Instructions and Parts Sheets for
the Drills Type 42, Type 52, Type 63, Type 73 and the "15-inch". All relevant
pages from the catalogs are included with details of Accessories and Attachments
including the Drill Sharpening Attachment, the "Slow-speed" attachment, "Planer",
"Mortising", "Shaper" (spindle moulder), drum sanding, Drill-sharpening attachment,
Vices, Chucks, Lamps, Tapping attachment, Guards, Drill Bits, Routers, etc. 116 pages.
A925 ATLAS Engineering Company (London, England). Full-range catalogue of heavy
machine tools: Boring, Rotary Planing, Transportable Planing, Millers, Boring
Bars, Oil Country and Pipe Lathes, Centre (Engine) Lathes, Surfacing and
Boring Lathes, Large Drum Turning Lathes, High-speed Break Lathes, Sliding Bed
Lathes, Straightening and Forcing Presses, Bar Straightening and Reeling
Machines, etc. 16 pages.
A950 AUTOMATIC (The Automatic Machine Co. Bridgeport USA) Auto. Threading
Lathes. 20 pages.
M100 AUTOMETRIC Jig Borer. This most unusual machine with round bars for all the sideways - and appears to have been built by the Autometric Machine Tool Co of Berkeley, California;
the Meyer Mechanical Laboratory and then by Kearney & Trecker. Two Sales and Technical Catalogs one by Meyer with 8 pages and a second with 12 pages by the Autometric Machine Co.
A960 AVIA FNC-25 Precision Universal Milling Machine. Sales and Technical
Specification Catalogue. 16 pages.
A960A AVIA FND-32 Precision Universal Milling Machine. Sales and Technical
Specification Catalogue. 16 pages.
A960B AVIA FNC25, FND-25 and FND-32 Precision Universal Milling Machines.
Sales and Technical Specification Catalogue. 6 pages.
A960C AVIA FNF40, FNF-40CNC and FNF-50CNC. Precision Universal Milling
Machines. Sales and Technical Specification Catalogue. 2 pages.
A964 AZETA FU-1 Milling Machine. Two slightly different Sales and Technical
Specification Catalogues. English, French, German and Italian text. 8 pages.
B1 BABY GRAND: Tiny Sales and Technical Specification Catalogue for US hobby
lathe. 4 pages.
B3 BALDING Beaver 9" swing Lathe: Sales and Technical Specification
sheet. 2 pages.
B5 BALDWIN (N.H.Baldwin U.S.A.): Foot Lathes and other machine tools. Catalog
circa 1880 showing "Improved Portable Foot Lathes". 66 pages.
B7 BANDINI FA1/CB Universal Milling Machine (Deckel clone). Sales and
Technical Specification Catalogue. 2 pages.
B7B BARBERO Drlling Machines Bench and Pillar (Taladradoras de Columna de Bancada - made in Argentina). Models BB 42/50, CB 25.32, ABE 28/32, CBE 28/32, ARB-20 and AS-16.
Sales and Technical Specification Catalogue. 6 pages.
B8 BARBER COLEMAN (Barber-Coleman) General Sales Catalogue: Lathes, Hobbing
machines, Hob Sharpening Machines. 8 pages.
B8A BARBER COLEMAN 1610T Toolroom Lathes Sales and Technical Specification
Catalogue. 16 pages
BARBER-MEUSER see under Meuser
B10 BARDONS and OLIVER No. 3 Universal and plain Turret Lathes. Sales and
Technical Specification Catalogue 8 pages
B12 BARDONS and OLIVER No. 2 Geared Electric Turret lathe. Sales and
Technical Specification Catalogue 6 pages
B14 BARNES (USA) Lathes Catalogue for 1921 showing the full range with
photographs and engravings. Models: No. 41/2, No. 5, No. 13, 13 and 18-inch
Engine Lathes and Accessories. 31 pages
B14A Barnes Lathes Catalogue for 1918 showing the full range with photographs
and engravings. 32 pages.
B14Y Bath (Fitchburg Machone Co.) Universal Grinding Machine. Sales, Technical Specification & Accessories Catalogue.
B14Z Batty Optical Projectors Types R12, R20, R30, R30L, R60 and Optotrace. Detailed Sales, Technical Specification & Accessories Catalogue.
24 pages.
B15 BCA Miniature Jig Borer/Jig Driller. A complete data pack consisting of UK
Sales and Technical Specification Catalogues for the Mk.2 and Mk.3 versions
(8 pages) together with a 2-page LEINEN Model BFL Catalogue (the original machine)
and a 2-page sheet for the other earlier version, the EXCEL Model"0"
Sales and Technical Specification Sheet.
B20 BEAVER (England) Model A Turret Miller (round ram machine with 6-inch wide
table). Sales and Technical Specification Catalogue with spindle
cross-section. 4 pages. US
B20-VBA BEAVER VBA Vertical Miller (round ram machine with10-inch wide table)
Sales and Technical Specification Catalogue. 4 pages.
B20A BEAVER (England) VBRP Mk. 1 Turret Miller: Comprehensive Sales and
Technical Specification Catalogue. 22 pages
B20B BEAVER (England) VBRP Mk. 2 Turret Miller: Detailed Sales and Technical
Specification Catalogue. 32 pages
B20C BEAVER (England) VBRP Mk. 2M Turret Miller: Last version of the VBRP with
different options list. 4 pages
B20D BEAVER (England) "PAL" Turret Miller - the smallest beaver in
the Company's range. Shows the 16-speed belt-change and variable-speed
versions. 4 pages.
B20Z BEAVER Mk. 4 Turret Miller. Sales and Technical Specification Catalogue.
4 pages.
B20E BEAVER (England) Mk. 5 VBRP. Sales and Technical Specification
Catalogue. 4 pages.
B20F BEAVER (England) COPYING MILLERS. Shows the Synchro-Trace. 180-Super,
Electro-Profile, Mk.2 Copy Mill and the rare Mk. 4 Copy Mill with motorised universal
angular milling head. Sales and Technical Specification Catalogue. 4 pages.
B20G BEAVER (England) "CRUSADER 5" and "Crusader 5-ATC"
CNC Millers. Sales and Technical Specification Catalogue. 4 pages.
B20H BEAVER (England) NC5 Numerically Controlled Milling Machine. Technical
Sales and Technical Specification Catalogue. 14 pages.
B20J BEAVER (England) NC15, NC25 and NC35 Vertical Machining Centres.
Technical Sales Specification Catalogue. 8 pages.
B20K BEAVER (England) NC560-15 (YANG NC560-15) Computer-controlled lathe. Sales
and Technical Specification Catalogue. 8 pages.
B20L BEAVER (England) CNC Machine Tools: NC15, NC5-ACT, NC5-S, NC5,
"Galaxy", "Vega", CK-2, 560-15: Sales and Technical
Specification Catalogue. 6 pages.
B20M BEAVER (England) TC20 Turning Centre. Sales and Technical Specification
Sheet. 2 pages.
B22 BECHLER Wonderful 1951 Colour Catalogue with a history of Andre Bechler
Machine Tools and technical details showing how the Automatic Lathe was
developed and how it operates. Factory photographs showing production process
and installations of Bechler lathes in watch factories. 34-pages. B and W
reproduction . Colour reproduction .
B22A BECHLER General Catalogue of Automatic lathes and Accessories. Includes
a description of how they work, the jobs they can undertake, employment of
accessories. Models covered include: AS, AR, BR, CR and Multibar loader. 20
pages.
B22B BECHLER Model AR Automatic Lathes. Sales and Technical Specification
and Attachments Catalogue. 24 pages.
B22C BECHLER Automatic Lathes MS-7, MTG-7, NA-12, R-10. Sales and Technical
Specification Catalogue. 8 pages.
B22D BECHLER Automatic Lathes Isomatic, Type A, Type B, Type C, Type Ar, Type
BR, Type CR, Sales and Technical Specification Catalogue 1958. 20 pages.
B22E BECHLER Model BR Automatic Lathes. Technical Sales and Technical
Specification and Attachments Catalogues. 20 pages.
B22F BECHLER CNC Lathe TBM-26. Sales and Technical Specification Catalogue. 6
pages.
B22G BECHLER CNC Lathe TOP-100. Sales and Technical Specification Catalogue.
6 pages.
B22H BECHLER CNC Lathe ELECTOR 16. Sales and Technical Specification
Catalogue. 6 pages.
B22J BECHLER Cam Cutting Machine Type CF. Sales and Technical Specification
Catalogue. 8 pages.
B22K BECHLER Automatic Bar Loader "Multibar". Sales and Technical
Specification Catalogue. 8 pages.
B23 BEICHLE Universal Tool Milling Machine. Sales and Technical Specification
Catalogue. 10 pages.
B25 BENCHMASTER (USA) Milling Machines and Presses. Full-range Sales and
Technical Specification Catalogue + Sales and Technical Specification Sheets
plus a 2-page Parts Manual. 15 pages.
B30 BENSON Precision Bench Lathes (England): Sales and Technical
Specification Catalogue. 16 pages.
B35 BERCO Con-rod Boring and Grinding machine ARB-500. Detailed Sales & Specification Catalogue, With annotated drawings and a clear description this
publication has enough detail to act as a simple instruction manual. 8 pages.
B40 BERGEON Watch and Instrument maker's Lathes: full Catalogue, 1950s. 40
pages.
B45 BERGSTRON Quick-Change Toolposts. Sales & Technical Specification Catalogue. 6 pages
B50 BERLIN Lathe (Harald Friedrich and Sonne) Sales and Technical
Specification Catalogue. 11 pages.
B58 Henry Berry of Leeds Hydraulic Engineers. Full-range catalogue showing machines for Railway Workshop Plant, Ship Launching equipment, Ships jacks, Wagon Tippers Rivetters, Plate Bending Rolls, Hoists and Cranes,
Punches and Shears, Presses, Pumps, Accumulators and Valves and Intensifiers, etc. 175 pages.
B59 BERRY 8-inch lathe. Sales and Technical Specification Catalogue. 4 pages.
B60 BERTSCHY Shapers: Sales and Technical Specification Catalogue 4 pages
B65 BESWICK Lathe. Sales and Technical Specification Sheet. 2 pages.
B66 Biernatzki Production Knee-type Milling Machines. Sales, Technical, Specification and Accessories Catalogue. 18 pages.
B67 BILCIA Precision Lathes, two Catalogues bound as one: 1) Types 20 and 25: Sales, Technical
Specification and Accessories, 10 pages in English. 2) Types M4 and M6, Technical Specification and Accessories, 4 pages in Spanish.
B70 Binns and Berry Type JB 10.5-inch centre height lathe: Sales and
Technical Specification Catalogue. Includes reproductions of the (frequently
damaged) screwcutting and spindle-speed charts. 10 pages.
B70A Binns and Berry Type TB 25" swing Lathe Mk 1: Sales and Technical
Specification Catalogue. 8 pages.
B70B Binns and Berry Type SAR 18" swing Lathe: Sales and Technical
Specification Catalogue. 4 pages.
B70C Binns and Berry Type TB 25" swing Lathe Mk 3: Sales and Technical
Specification Catalogue. 8 pages.
B70D Binns and Berry Type SB Lathe (Headstock unit and floor plinth - factory
code "TG" for Tangram lathe): Sales and Technical Specification
Catalogue. 17 pages.
B70E Binns and Berry Type ME 8.5" centre height Lathe: Sales and
Technical Specification Catalogue. 4 pages.
B70F Binns and Berry Type "Light" 23" swing Lathe: Sales and
Technical Specification Catalogue. 3 pages.
B70G Binns and Berry GEMINI AND "GEMINIS" lathes (Spanish built)
Series 1200, Series 1800, GE1200, GE1200S, GE970, GE850, GE650 GE500 (etc).
Sales and Technical Specification Catalogues. 32 pages.
B70J Binns and Berry TRIDENT LATHES. Sales and Technical Specification
Catalogue. 10 pages.
B70K Binns and Berry DATA-90 LATHE. Sales and Technical Specification
Catalogue. 8 pages.
B70L Binns and Berry "London" 11.5-inch centre height. Sales and
Technical Specification Catalogue. 8 pages.
B70M Binns and Berry - older lathes. 6.5 to 12.5-inch centre height. Sales
and Technical Specification Catalogue. 12 pages.
B70N Binns and Berry Shaper - 16-inch stroke. Sales and Technical
Specification Catalogue. 4 pages.
B73 BLANCHARD NO. 16 Vertical Surface Grinder. Comprehensive Technical sales
Catalogue.
B74 Blohm HFS Range of Surface Grinders. Detailed Sales, Technical Specification and Accessories Catalogue. 56 pages
B74A Blohm SIMPLEX range of Surface Grinders. Detailed Sales, Technical Specification and Accessories Catalogue. 34 pages
B74B Blohm HFS 204 Surface Grinder. Detailed Sales, Techical Specification and Accessories Catalogue. 32 pages
B74C Blohm 204 Surface Grinder. Detailed Sales, Technical Specification and Accessories Catalogue. 28 pages
B75 BLOUNT Lathes and Grinders. Sales and Technical Specification
Catalogue.12 pages.
BOEHRINGER - see also under VDF
B77 BOEHRINGER Turret Lathes Sales and Technical Specification Catalogue. 20
pages.
B150 BOKO (Bohner & Kohle) Catalogue Collection covering the miller Types: Fo, F1, F2, F2V, WF2, F3, F30, F30.1o and a detailed
30-page catalogue showing examples of work performed on BOKO millers. 97 pages.
G. BOLEY - see also the LEINEN
section for Catalogues showing similar "Boley-Leinen" lathes.
G. BOLEY made a large range of lathes. If you can't see yours here please e-mail a
picture to: tony@lathes.co.uk
B210 BOLEY Accessories and Parts For Lathes. Covers the full range of
accessories made for the Types: 2-HME, 4LV, 5LZ, Mechanics Lathes Sizes 2 and 3
and Second Operation Lathes 4H, 4E, 4-HR, 4-HK, 4-PS. A vast range of extras,
comprehensively illustrated. 68 pages
B210A BOLEY Attachments and Accessories Catalogue for the larger (not
watchmakers') lathes. This publication shows the full range of ordinary and
extra-ordinary accessories available from the early 1920 to the mid 1940s. 20
pages.
B210B Accessories for Boley Lathes: sizes 2, 3, 4 and Boley
"Mechanics" Lathe and Short-bed and Precision Model 4L. 28 pages.
B210C BOLEY Stands, Countershafts, Foot Treadle and Independent drives for
Plain-turning and Screwcutting Lathes. 10 pages.
B211A BOLEY Miniature Precision Lathes: full-range catalogue (1983) small
format. Shows the last range of Boley lathes made. 12 pages.
B211B BOLEY Miniature Precision Lathes: full-range Catalogue (1983) small
format. Shows the last range of Boley lathes made including the 1HME, 2HME, F1,
DW4, RD, 6LZ, 4E, 4PS, BDA-H, 4H, BKN-100, BDN-160, VG16 Multi-spindle drill,
BE2 Bench Drill and the Boley Vice. 12 pages.
B211B-F Boley F1 Super-precision Watchmakers' Lathe. Not a manual but a very
detailed and informative Sales Catalogue that explains clearly how to use the
lathe for the specialised work of which it was capable. 4 pages.
B211C Boley Lathes Sales Folder showing the entire lathe range as it was in the
1970s. Models shown include the Miniature Precision Sizes 1 and 2, the larger
plain-turning and screwcutting Models 4E, 4H, 4PS, 4LV, 5LZDW4, RD25 and RD42.
8 pages.
B211D Boley Sales Folder showing the entire lathe range as it was in the 1950s
and 1960s. "Miniature Precision" models 1, 2, 3, 4. Screwcutting
models : 4L, 4P and 4H. Super Precision model: DW4; Turret model: REV 25
and Drills. 6 pages.
B211E Boley Lathes: 1A, 1B, 1BH, 1HM, 1HME and Sizes 1, 2, 3 and 4 lathes.
Detailed catalogue of Boley lathes made from the 1930s to the 1960s. Includes
Watchmakers' Lathes, Precision Plain-turning and Production Lathes, Bench
Lathes, Backgeared and Screwcutting Lathes. 20 pages.
B211F BOLEY WATCHMAKERS' LATHES: Complete-range catalogue circa 1924 - covering
items many of which were made from the late 1800s until the 1960s. Shows not
just the lathes and their accessories but vertical and horizontal milling
machines, drilling machines in light and heavy types, anvils, cases,
countershafts and drive systems, files, foot motors, gauges, hammers, hand
tools, micrometers, sliding verniers Gauges, stakes, drifts, punches,
screwdrivers, spring winders, tweezers, vices and even work-bench stools, etc.
A superb production, which illustrates to perfection the enormous variety of
Boley products. 86 pages.
B211J Boley "Small Precision Lathes" Sales Folder
Models 1A, 1B, 1HM, 1HME 6 pages
B211K BOLEY Precision Lathes (other than watchmakers'
lathes): Three wonderful full-range catalogues from the 1920s and 1930 that
show the complete range of plain-turning and screwcutting lathes as
manufactured from the early 1920s until the mid 1940s. Includes a very rare UK
price list. two catalogues are for the lathes, the third is a special
Accessories Publication. 80 pages
B211L Boley Mechanic's Lathe "Size 2" Models 2-BE
and 2-HME: Sales folder 6 pages
B211M Boley "Mechanic's" Precision Lathe Size 3: Sales Folder. 6
pages
B211N Boley Size 4 Lathes. Comprehensive Catalogue showing in details the Types
4H, 4E, 4HR, 4HRA and 4HK. Illustrated all the different combinations of
headstock, slide rests, tailstocks, slide rest. drive systems, stands,
automation systems, thread chasing, etc. 38 pages.
B211P Boley Precision "Mechanics" Lathes Type L: Sales folder (1930s
machines) 4 pages
B211Q Boley Precision Lathes Models 1A, 1B, 1AM, 1BM, 1AH, 1BH, 2A, 2B, 3B, 3C,
4B, 4C, 3CR, 4BR, 2BJ, 3BJ, 4BJ, 3L, 4L, 2H, 3H, 4H, 3HK, 3HL, 3HM, 2HN, 2HK,
3HK, 4HK, 2HL, 3HL, 4HL, 2HM, 3HM, 4HM, PA, PS, PP, PQ, Type G and Accessories
and Drive Systems. Catalogue No. 271 showing lathes as made from the 1920s to
the 1930s. 34 pages
B211S Boley 4L (late model backgeared and screwcutting on a distinctive
self-contained stand with central storage drawers). Detailed and
well-illustrated Sales Catalogue. GERMAN TEXT. 8 pages
B211T BOLEY 5LZ High-precision Screwcutting Lathe. Detailed Technical Sales
Catalogue with control and operation explanations. 26 pages.
B211U Boley Micro-finish, High-precision Lathe DW4. Sales Catalogue 4 pages
B211V Boley Turret lathes REV 16, 25 and 42: Sales folder 4 pages
B211W Boley Turret lathe REV 10: Sales Folder 4 pages
B211X Boley Turret Lathes 1920s and 1930s: Sales and Accessories Catalogue.
11 pages.
B211Y Boley Universal Precision Milling Machine: Sales Folder (1929) 4 pages.
B211Z Boley RD 25 "Vertical Turret" production lathe. 16 pages
B211Z2 Boley "Precision Machine Tools" - a 6-page
Sales and Specification Folder showing the miniature precision lathe Size 1,
Mechanics Lathe Sizes 2, 3 and 4, High-precision screwcutting lathe 5LZ, Lathe
Type DW4, Lathes Types REV25 and REV42, Bench-mounted Sensitive Drill BE2,
Multi-spindle Drills and tapping machines VBef13 and VGe10.
B212H ALL the ABOVE Boley Literature as a very high quality reproduction.
Boley and Leinen - this was an entirely separate company to G.Boley
B210B BOLEY and LEINEN (Boley and Leinen was a Leinen-owned Company)
Precision Watch Lathes and Tools: Catalogue No.516E Contains beautifully
illustrated details of "Reform" Lathes, and Accessories (Individual
and Boxed Sets) Countershafts and Drive Systems, Bench Vices, Staking Tools
etc. 16 pages.
B210C Boley and Leinen Precision Watch Lathes and Tools: catalogue Cat. No.
5111E As above catalogue B171 but an earlier edition with a slightly different range
of models. 12 pages.
L210D BOLEY and LEINEN: Wonderful Complete range catalogue showing the
watchmakers' and larger lathes and accessories as manufactured during the 1920s
and 1930s. 32 pages
B215 BOLEY and LEINEN Precision Watch Lathes and Tools: Catalogue No.516E
Contains beautifully illustrated details of "Reform" Lathes, and
Accessories (Individual and Boxed Sets) Countershafts and Drive Systems,
Bench Vices, Staking Tools etc. 16 pages
B215A Boley and Leinen Precision Watch Lathes and Tools: Catalogue Cat. No.
5111E As above Catalogue B171 but an earlier edition with a slightly different
range of models. 12 pages.
Both Boley and Leinen Catalogues above:
L215C BOLEY and LEINEN: Wonderful Complete range Catalogue showing the
watchmakers' and larger lathes and accessories as manufactured during the 1920s
and 1930s. 32 pages.
B220/L800 Bolla Eligio Mario LUX No. 2 Milling Machine. Sales and
Technical Specification and Accessories Catalogue. 12 pages.
B230 Bottequin & Blanchaert Shapers BB450 and BB600 (Etau-Limeur). Sales & Technical Specification Catalogue in French with English Translations. 10 pages.
B244ALL BOXFORD Machine Tools: a Special Catalogue Data Pack
of all products that shows the conventional machine tools made by the Company.
Spans from the very early 1940s 3-inch Precision Lathes and Rear-drive
models to the later Underdrive types and the final Geared-head versions.
Technical specifications, illustrations of machines and accessories
including: precision lathes large and small, the rear drive T, C, B, A,
CSB and ME10, Underdrive lathes TUD, CUD, BUD, AUD and VSL, Conventional
rear driven lathes the C, B and A lathes, the later geared headsTR.11.30,
330IS, 280T models, Tool and Cutter Grinder, a special brochure on the
lathe milling and indexing slides Little Giant Toolpost Grinder, three
Bench and Floor-standing drill catalogues, Measuring and Inspection
equipment, VM30 Vertical Miller and three catalogues for the S200
8-inch Shaper, etc 140 pages. 140 pages.
B244DR BOXFORD Drills 9also Branded UNION)- all types, bench and pillar and accessories.
Three Sales and Technical Specifcation Catalogues. 12 pages
B240 Boxford (Denford) Precision 3-inch Bench Lathe and Bench Capstan Lathe.
Sales and Technical Specification Sheets circa 1945/6. 4 pages including a
price and specification list and advance information for the 4.5-inch lathes.
B240AA BOXFORD 4.5" Precision Plain-turning lathe.
Sales and Technical Specification Catalogue. 6 pages.
B244 BOXFORD Lathes and Accessories: Catalogue Early 1950s covering all the
4.5-inch rear-drive models. 26 pages
B244A Boxford Accessories: Sales and Technical Specification Sheets showing
the full range of accessories. (1965) 12 pages.
B244B Boxford Lathes AUD, BUD, CUD early Underdrive Types in Mk. 1 form. Sales
and Technical Specification and Accessories Catalogue. 4 pages
B244C Boxford lathes AUD, BUD, CUD and VSL later Underdrive Mk. 1 Types.
Sales and Technical Specification and Accessories Sheets 7 pages.
B244D Boxford Lathes AUD, BUD, CUD MK. 2 Underdrive Type: Sales and Technical
Specification and Accessories Sheets 8 pages.
B244F BOXFORD TUD Training Lathe Sales and Technical Specification Sheet. 2
pages.
B244G BOXFORD ME10 Lathe Sales and Technical Specification Sheet. 2 pages.
B244H BOXFORD CSB Lathe Sales and Technical Specification Sheet. 2 pages.
B244J BOXFORD VSL Lathe Sales and Technical Specification Sheet
(variable-speed drive Mk. 1 with screwed spindle nose). 2 pages.
B244K BOXFORD VSL/L00 Lathe Sales and Technical Specification Sheet
(variable-speed drive Mk. 2 with long-nose taper spindle). 4 pages.
B244L BOXFORD G.200 Tool and Cutter Grinder. Sales and Technical
Specification and Accessories catalogue. 4 pages.
B244M Boxford VM30 Vertical Miller: Sales and Technical Specification
Catalogue. 5 pages
B244MM Boxford "Milling with the Boxford Lathe": Sales and
Technical Specification Catalogue showing the tall-type milling attachment
being used on a variety of jobs. 6 pages
B244SHP Boxford Shaper. All four Sales and Technical Specification Catalogues
issued: Edition 1: 8-inch High-speed shaper (2 pages). Edition 2 : 8-inch
High-speed shaper (2 pages). Edition 3: Model 200 Shaper 2-pages. Edition 4:
Model S200. Also included two price lists. 10 pages in total.
B245 Later Conventional (not computer controlled) Boxford Lathes: A complete
package of information for the: T, TR, STS, TS, TF, TH, produced in 10-inch and
11-inch versions with models types: 10.20, 10.30, 11.30, 280, 330 and
sub-variants. All models from plain-turning to Toolroom types. 33 pages. .
B262A Boxford ACL (Advanced Computer lathe) Sales and technical Specification
catalogue. 4 pages.
B262B Boxford DUET Dual-purpose CNC Training machine. Sales and Technical
Specification Catalogue. 2 pages.
B262C BOXFORD MT2 Combined Lathe and Miller. Sales and Technical
Specification Catalogue.2 pages.
B262D BOXFORD A3HSRi Router with PC Control. Sales and Technical
Specification Catalogue.2 pages.
B262E Boxford 125 TCL Sales and Technical Specification Catalogue 2 pages
B262F Boxford 160TCL Machining Centre. Sales and Technical Specification
Catalogue. 4 pages.
B262G Boxford 165HMC Horizontal Machining Centre. Sales and Technical
Specification Catalogue with Price List and Software options 4 pages.
B262H Boxford 190VMC Vertical machining centre. Sales and Technical
Specification Catalogue 4 pages.
B262J Boxford 190VMCxi Vertical machining centre. Sales and Technical
Specification Catalogue 2 pages.
B262K BOXFORD T220 CNC Lathe. Sales and Technical Specification Catalogue.2
pages.
B262L BOXFORD 240TCL CNC Lathe. Sales and Technical Specification Catalogue.2
pages.
B262M BOXFORD 240F Fanuc CNC Lathe. Sales and Technical Specification
Catalogue.2 pages.
B262N Boxford 250PC Slant-bed Computer lathe. Sales and Technical Specification
Catalogue. 6 pages
B262P Boxford 260 VMC Vertical Machining Centre 2 pages
B262Q Boxford 280 Turnmaster CNC 4 pages.
B262R Boxford 280 TCL (Computer Training Lathe) 2 pages.
B262S Boxford 280 TCL (Computer Training Lathe) 2 pages.
B262T Boxford 300VMC Machining Centre. Sales and Technical Specification
Catalogue. 6 pages.
B262U BOXFORD MidiMill Vertical Machining Centre. Sales and Technical
Specification Catalogue.2 pages.
B262V Boxford 240F Fanuc Training Lathe. Sales and Technical Specification
Catalogue. 2 pages.
B262W Boxford "Little Giant" Toolpost Grinder. Sales and
Specification Sheet. 2 pages.
B262X Boxford (Denford) Machine-tool Accessories: Comparator Gauges, 20-inch
Sine Centres, Sine Tables, Universal Stand, Double column Stand, Precision
Parallels and Precision Straight Edges. Sales and Specification Catalogues.
7 pages.
B365 Boyar-Schultz Model 6.12 Surface Grinder: Sales and Technical
Specification Catalogue. 6 pages
B370 BOYE and EMMES (USA) Machine Tool Co. "Schumacher and Boye"
Lathes: 19-page Sales and Technical Specification Catalogue circa 1912
showing the full range of lathes made from around 1900 to 1920.
B370A BOYE and EMMES (USA) Lathes: 14-page Sales and Technical
Specification Catalogue circa 1926 showing the range of geared-head lathes as
made from around 1920 to 1930 and later. Also included (additional to the 14
pages) is correspondence from the factory to a customer.
B370B Boye and Emmes 14-inch Series AB lathe (1955): Sales and Technical
Specification Catalogue. 4 pages
B370C Boye and Emmes Engine lathes: Size 2013 (16-inch)
Series BB2 Sales and Technical Specification Catalogue. 4 pages.
B370D Boye and Emmes Engine lathes: 20-inch Series CB:
Sales and Technical Specification Catalogue. 4 pages.
B370E Boye and Emmes Engine lathe 2516 Series CB2: Sales
and Technical Specification Catalogue. 4 pages.
B370F Boye and Emmes Engine lathe: Dual-Spindle Model
Sales and Technical Specification Catalogue. 6 pages.
B370G Boye and Emmes Engine lathe: Model A 16-inch Heavy Duty (headstock
tapers from outer face to chuck end). Sales and Technical Specification
Catalogue. 4 pages.
B400 BRADFORD very early and rare circa 1900 full-range Catalogue with
wonderful illustrations and detailed descriptions showing the lathes, front and
rear views of sub-assemblies and accessories as they were from around 1895 to
1920 68 pages
B401 BRADFORD Metalmaster (geared-head) Lathe Sales and Technical
Specification Catalogue 1940 edition with double-page spread picture. Includes
1941 Sales and Technical Specification sheet. 10 pages
B402 BRADFORD Metalmaster (geared-head) Lathe Sales and Technical
Specification Catalogue - early edition dated 1941. 8 pages
B403 BRADFORD Metalmaster (geared-head) Lathe Detailed Sales and Technical
Specification Catalogue - later edition dated 1946 showing the lathe as it was
in the 1950s. 8 pages.
B404 BRADFORD General Catalogue with Lathe, Grinders and Buffers 32 pages.
B450 Breda Lathes: Catalogues for the: BRF150, BRM180, BRL 225, BRL 250, BRF
250 and BRM F250. 22 pages.
B450A BREDA 30th Anniversary Range Brochure. Lathes Models; BRF150, BRM180,
BRL225, BRL250, BRP250, BRP300. radial-arm drills Models: R915L, R1200L,
R1220MP, R1580MP, R1880MP, Twist Drill Grinders AFP30, AFP50 AFP80. Plus
interesting pages on the factory background and history. 16 pages.
B450B BREDA Radial-arm Drills Series MS and MP - all sizes. Sales and
Technical Specification Catalogue. 12 pages.
B450C BREDA Twist-Drill Grinding Machines AFP30, AFP50 and AFP80. Sales and
Technical Specification Catalogue. 6 pages.
B450D BREDA Grinding Machine AFC5. Sales and Technical Specification
Catalogue. 6 pages.
B474 BRIDGEFORD (USA Betts machine Company) Heavy-duty Lathes: Whole-range
Sales and Technical Specification Catalogues. 65 pages.
B575 BRIDGEPORT MILLERS. Pre-war to early 1950s "Round-ram" Sales
and Technical Specification Catalogue (not a first class example but
perfectly readable) together with an excellent Post WW2 4-page catalogue. 20
pages
B575A BRIDGEPORT MILLERS ATTACHMENTS Catalogue. Early Edition circa 1952 (Cat.
30). 16 pages.
B575B BRIDGEPORT MILLERS Series 1 and Series 2 Vertical Turret Millers Sales
and Technical Specification Catalogue (Cat. C115) 16 pages.
B575C BRIDGEPORT MILLERS (USA) Detailed Full-range Sales and Technical
Specification and Accessories Catalogue circa 1970s (Cat. BR67) 46 pages
B575D BRIDGEPORT MILLERS 1954 "Celebration of 20,000 machines"
Catalogue. 4 pages
B575F Bridgeport Millers Series 1: Sales and Technical Specification
Catalogue 15 pages
B575G Bridgeport Millers Series 1 BRJ and BRM and Accessories. Sales and
Technical Specification Catalogue 42 pages
B575H Bridgeport Millers Series 1 (Adcock and Shipley Cat. No. 37) Full-range
Sales and Technical Specification and Accessories Catalogue. This edition
contains more technical and specification information than any other Bridgeport
Catalogue. 42 pages
B575J Bridgeport Millers Series 1 BRJ/BR2J2 Cat. No. 208/EFg2) Sales and
Technical Specification and Accessories Catalogue. 24 pages
B576 Bridgeport Millers: General Sales and Technical Specification Catalogue
1980s - CNC Vertical, Vertical and Horizontal Machining Centres, Universal
Machining Centres 8 pages
B576A Bridgeport Series 1 CNC Milling Machine Sales and Technical
Specification Catalogue (No. 105/E2). 18 pages.
B576B Bridgeport Series 1 CNC Machining Centre. Technical Specification
Catalogue.. 4 pages.
B576C Bridgeport Series 2 with NC Control. Sales and Specification catalogue.
15 pages.
B576D Bridgeport Series 2 MDI (Manual Data Input)with NC Control. Sales and
Specification catalogue. 15 pages.
B576E Bridgeport CNC Milling Machines All-models Sales and Technical
Specification Catalogue: Interact Series 1 MK. 2, Interact 4 Series 2. 18
pages.
B576F Bridgeport General CNC Catalogues (two) giving short specifications of:
Interact Series 1, Interact 1 Mk. 2, Interact 2, Interact 4, Interact 300,
Interact 400, Interact 412, Interact 520, Interact 700, BPC 320H, BPC 380H, BPC
520V, BPC 520V-APC. 16 pages.
B576G INTERACT Mk. 2 INTERACT 4 Sales and Specification Catalogue. 12 pages.
B576H Bridgeport VMC500, VMC600, VMC800 and VMC1000. Sales and Specification
Catalogues. 16 pages.
B576J Bridgeport APC600. Sales and Specification Catalogues. 8 pages.
B577 Bridgeport Surface Grinders: Sales and Technical Specification
Catalogue. 14 pages.
MB118 BRITANNIA - a 234-page "Manual" published by the Britannia
Company in 1899 to advertise their lathes and show how to use them in technical
schools. An additional 192 page advertising section (Catalogue No. 6) is at the
back of the book that shows the complete range of Britannia products for both
the amateur and professional markets. A wonderful publication - and a rare
find. Covers every aspect of lathe work including a useful section on
ornamental turning, ornamental attachments and spinning. High-definition scan
to CD or printed
MB118A Britannia No. 7 "Engineers' Tools Etc. Catalogue" showing the
full range of lathes, millers, shapers, pillar and radial-arm drills,
horizontal borers, planers, parting-off machines, punching and shearing
machines, screwing machines, plate flanging machines, chucks, compound slides,
cutting tools, vices, saws, band saws and engineers tools. 82 pages.
B789V BROADBENT Heavy Duty Vertical Boring Mills 1970s Sales and Technical Specification Catalogue
showing the Series 60, 72, 96 and 120 Models - the numbers refer to the table diameters in inches. 14 detailed pages.
B788 BROADBENT Machine Tools. Complete Range Catalogue showing the machines as
produced during the 1950s and 1960s. Includes: Lathes, Horizontal Plano-milling
Machines, Vertical Boring and Turning Machines and Bar Reeling Machines. 72
pages.
B788B Broadbent Machine Tools. Complete range Catalogue showing the machines of
the late 1960s and 1970s: Lathes Series 2534 and 3748; Oil Country Lathes
Series 121HS, 1215HS. Heavy duty Vertical Boring Mills Series 60, 72, 96 and
120. 32 pages.
B788C Broadbent L8V and L10V Lathes catalogue 5 pages,
B789 BROADBENT and SCHOFIELD "BSB" Lathes.
Complete Catalogue Collection for the Types: BSB, C, BSC, BSD, BSH, BSN and BSX. 60 pages.
B789F BROADBENT and SCHOFIELD "DRUM" Lathes. Two Sales and
Technical Specification Catalogues showing all the models made by the Company.
12 pages.
B789G BROADBENT and SCHOFIELD "BREAK" Lathes. Sales and Technical
Specification Catalogue. 12 pages.
B789H BROADBENT and SCHOFIELD "Dual Spindle" Lathes. Sales and
Technical Specification Catalogue. 6 pages.
B789J BROADBENT and SCHOFIELD
Oil-Country Lathes. Sales and Technical Specification Catalogue. 4 pages.
B795 Brodrene Sundt (Norway). Sales Booklet (1948) covering their full range of
lathes and a Horizontal Borer.
B797 Brook Shapers (Newey Engineering) Sales and
Specification Catalogue.6 pages.
B799 Brown and Sharpe Full-range Catalogue dated 1951: Milling, Grinding and
Screw machines. 40 pages
B799A
Brown & Sharpe: a wonderful book of photographs and technical details of Brown & Sharpe Grinding
Machines - Surface, Tool & Cutter, Face Grinding and Universal Tool & Cutter -
as manufactured from the 1940s to early 1950s. Includes details of standard,
modified and special machines with pictures of special fittings and accessories.
A high-quality reproduction. 172 pages.
B799B
Brown & Sharpe Milling Machine Catalog dated 1928 giving technical specifications and interesting and detailed constructional details
of the ""Standard" range including the Models 2A, 3A, 2B, 3B. 36 pages.
B799BX Brown and Sharpe Millers Catalog Collection: No.000, No.0, No.2Y, No.3, No.3B, No.10, No.12, No.13, No.22,
Rangemaster and Vertical and Universal Milling Attachments. 100 pages.
B800Z BROWN and SHARPE "Construction and Use of Milling Machines".
Wonderful 230-page book published in 1900 showing the company's products,
accessories and work samples. High quality reproduction enlarged to A4. 230 pages.
B800A BROWN and SHARPE No. 000 Plain Milling Machine. Sales and Technical
Specification Catalogue 1961 8 pages
B800B BROWN and SHARPE No.0 OMNIVERSAL Toolroom and Experimental Milling
Machine. Two Sales and Technical Specification Catalogues showing early and
late types. Wonderful pictures and a detailed specification of a remarkable machine tool. 28 pages.
B800C BROWN and SHARPE (USA) No. 0 Horizontal Milling Machine. Sales and
Technical Specification Catalogue 1939. 4 pages.
B800D BROWN and SHARPE (USA) No. 1 Vertical Spindle Milling Machine. Very
early (1912) Sales and Technical Specification Catalogue. 7 pages.
B800E BROWN and SHARPE (USA) No. 2Y Plain Milling Machine. Sales and
Technical Specification Catalogue. 4 pages.
B800F BROWN and SHARPE No. 3 Vertical Milling Machine. Sales and Technical
Specification Catalogue 1939. 8 pages.
B800G BROWN and SHARPE No. 3B Vertical Milling machine. Sales and Technical
Specification Catalogue 1947 4 pages
B800H BROWN and SHARPE No. 10 Plain Milling Machine. Sales and Technical
Specification Catalogue 1940 12 pages
B800J BROWN and SHARPE No. 12 Plain Milling Machine. Electrically Controlled.
Sales and Technical Specification Catalogue 12 pages
B800K BROWN and SHARPE No. 12 Plain Milling Machine 3hp spindle Sales and
Technical Specification Catalogue 1952 16 pages
B800L BROWN and SHARPE No. 13 Plain Milling Machine 3hp spindle Sales and
Technical Specification Catalogue. 12 pages
B800M BROWN and SHARPE No. 22 Plain Milling Machine. Sales and Technical
Specification Catalogue 1931 16 pages
B800N BROWN and SHARPE Vertical Milling Attachments and High-speed Milling
Attachments for B and S Horizontal Milling Machines of the 1920s. 6 pages.
8 pages
B801 BROWN and SHARPE No. 2 and 2B Surface Grinders. Sales and Detailed and well-illustrated Sales, Accessories & Technical
Specification Catalogue. 12 pages
B801A BROWN and SHARPE Cylindrical Grinding and Indexing Attachment for
Surface Grinders. Sales and Technical Specification Catalogue. 4 pages.
B812 BRYANT SYMONS Late Catalogue Set for the: Diamond Machining (4 pages); Piston-Turning Lathe Model 100POL (1 page);
Piston-Turning Lathe Mk.2 (8 pages); Precision Diamond-Turning Lathes (16 pages).
BSA ACME GRIDLEY - See under ACME GRIDLEY
B820 BSA Multi-Tool Production Lathe MT1. Detailed technical Sales and
Technical Specification Catalogue 13 pages.
B820A BSA No 4 Centreless Grinder. Detailed and well-illustrated technical Sales and
Technical Specification Catalogue 12 pages.
B820B BSA 95 and 95E "All-electric" Automatic Chucking Machines. Sales & Technical Specification Catalogue. 20 pages.
B820C BSA Tapping and Threading Machines. Sales & Technical Specifications All-model Edition showing the No.1, No.2, No.3 radial, No.4 , Special Fixtures and Chucks.
16 pages.
B860 BTM Watchmakers' Lathe: Sales and Technical Specification Catalogues. 4
pages of detailed descriptions and pictures.
B865 BUFFALO FORGE Sales and Technical Specification Catalog No. 205
"Mechanical Technology" dated 1916. Superb, full-range including the
"Buffalo Complete Woodworker", Forges, Drills, Lathes, Band Saws,
Woodworking Machinery, sets of exercises for learning the art of forging and welding
and photographs of forge installations. 95 pages.
B866 BURDETT Model 60, 65 and 66 hand-operated surface grinders. Sales and
Technical Specification Sheet. 2 pages.
B866 BURDETT Model 70 and 75 Surface Grinders Mk.1 - with front-mounted wheel
controls directly one above the other. 18" x 6" table. Sales and
Technical Specification Catalogue. 12 pages (two catalogues, early and late).
B866A BURDETT Model 70 Surface Grinder Mk 2 - one wheel control in the centre
and the other to the right and lower(also badged as the Elliott
"Rapidgrind"). Detailed Sales and Technical Specification
Catalogue. 10 pages.
B866Z BURDETT Slotting Machines Nos. 18, 18A, 20, 20A 8", 10",
12" AND 14". Sales and Technical Specification catalogues. 20
pages.
B870 BURKE Miller No. 1 hand-operated. Sales and Technical Specification
Catalog with Vertical Head details and Price List - 1940s and 1950s models.
10 pages.
B870A BURKE Bench and Floor Millers No. 1,No.3, No. 4. Sales and Technical
Specification Catalog. 4 pages.
B870B BURKE Milling Machines - All-models catalog: Millrite S/P, V/S, Vertical,
Application Millers, Horizontal Model 333, NC Control Model 720B, N/C Millrite,
Surface Grinders, Hand-operated Horizontal Millers No. 1, No.2, No. 4, No. 1
Half-mill, No. 2 Half-mill, Hy-Flex Hydraulic Miller and Accessories.58
Pages.
B870C BURKE Milling Machines - single-page advertising sheet with pictures of the Vertical and horizontal models
and specifications of the Nos. 0. 1. 2. 3. 4 and 5 machines
B890 BURKHADT and WEBER (BW) Reutlingen. Sales and Technical Specification
Sheet Drills, Saws.
B896 BUSCH Milling Machines: two Sales & Technical Specification Catalogues, one for the FSO Vertical
Universal and another All-Models edition showing the NF3, FW, NF-2-Q-150, FSV-5, FSV-6, FSU, NF-1 Special, NF-1 and NF-2.
8 pages
B906 BUTLER Full-range Catalogue circa 1940s to 1950s. superb illustrations showing planers with Spur-gear and spiral
electrical drive, openside crank planers, axel box planer,traverse-head shapers, crank shapers. toolroom shaper,
draw-cut shapers, punch slotters, high production slotters and precision slotters. 218 pages.
B906A BUTLER Toolroom Slotters - later types with enclosed balance weights : Sales and Technical Specification Catalogue.
18 pages.
B907 BUTLER Toolroom Slotters - older tpes with exposed pivoted counter weight at the top: Sales and Technical Specification Catalogue. 16 pages.
B907C BUTLER Hydroplane Open-sided planers: Models 633, 833. Sales and
Technical Specification Catalogues (2). 12 pages.
B907D Butler Toolroom Shapers: Very early Sales and Technical Specification
Sheet. 2 sides.
B907E BUTLER "Super Shapers". A Comprehensive Catalogue Collection showing the many various Models and their accessories in both
early "Crank" Type and later versions. 55 pages
B907EE BUTLER Elgamill Milling and Boring Machines. 4 Detailed Sales & Technical Specification Catalogues that
shows the construction of the machines and explains their working principles
Covers the all versions of the models: CS8, CS10, CS10V, DR12VA, CSN10, DR12,
CR15V3, CR15V4, Typle L, Types T and NC, High-Power Models and Accessories. 62 pages.
B907G BUTLER Elgamill - catalogue showing the Elgamill machining large and complex jobs. 24 pages
CA1 Caballeria Turret Lathe TR-40 Torno Revolver TR-40. Sales & Technical Specification Catalogue. English and Italian text. 6 Pages.
C1 CADILLAC Lathes CM1422, CM1428, CM1440, CM1733, CM1749, CM1760, CM1780, CM2233, CM2260, CM2280 and CM22100. Sales, Technical Specification and Accessories Catalogue. 8 pages.
C1A Canavese CG-150-F, CG-150-F-A, CG-230-F-A and T.I.F. Copying Lathes and the Turret Lathes Types CG--40-R.T.C. and CG-40.
Sales and Technical Specification Catalogue. 16 pages.
C1AA CANMA - Machine for Shaping Cams used on Swiss Auto Type Lathes. Detailed 4-page Sales and Technical Specification Catalogue.
C1BB Cantoni Macut W51 Precision Toolroom Tornio Catalogo vendite e specifiche tecniche (testo italiano) 18 pagine.
Cantoni Macut W51 Precision Toolroom Lathe Sales & Technical Specification Catalogue (Italian Text) 18 pages.
C2 CAPCO Surface Grinders hand-operated Size 1 and Size 2.
Sales and Specification Catalogue. 12 pages (two editions included, early and
late showing slightly different models)
C4 CARDIFF - manufactured by ELLIOTT. See under the Elliot section below - -
C5 Carson Tool and Cutter Grinder. Sales, Accessories and Specification
Catalogue with a page having as sectional drawing through the headstock with
instructions concerning the bearing adjustment procedure. 12 pages.
C6
Carstens Lathe, milling machine and grinder literature. Five catalogues are available:
1) Carstens Lathes, 3 sales sheets: DRLZP Lathe Sales Sheet. 4 pages with detailed description & specification in English and German. 4 pages.
2) Carstens DRGK 600/130 plain-turning precision lathe Sales Sheet. 4 pages with detailed description & specification in English and German. 4 pages.
3) Carstens DMR plain-turning precision lathe. 2 pages. German text only
4) Carstens Milling Machines HVF 600/130 & HF 600/130. Sales & Specification Sheet. 2 pages
5) Carstens RESH 450/200 Cylindrical Grinder. Detailed Sales & Specification Catalogue. 8 pages.
C8 Carroll-Jamieson Masterturn lathe. Sales and Technical Specification Catalogue.
6 pages. .
C10 CASER Radial-arm Drilling Machines Models F25 and F30. Sales and
Technical Specification Catalogue. 8 pages.
C11 CATARACT (Hardinge) Wonderful Full-range Catalogue circa 1910 - 1920
showing all the Precision Bench and Screwcutting Lathes, Milling Machines,
Automatic Gear and Pinion Cutters, Drills and the full accessory range.
Although not a handbook, there are many descriptive and illustrative details of
the machines' construction, drive systems and countershafts including sectional
drawings of the various headstocks. 116 pages.
C11A CATARACT (Hardinge) 1902 Catalogue: Bench Lathes and Attachments;
precision bench drill. 29 pages. Not a first-class copy.
C11B CATARACT (Hardinge) Wonderful
Full-range Catalogue of Precision Lathes and Millers of the 1930s. Includes
bench precision lathes, milling machines of the MD3, MD4 horizontal millers,
BB2V (the vertical version of the horizontal BB4) and MD5 (horizontal with
conventional overarm) types. Automatic Gear and Pinion Cutters, Drills and
the full accessory range. Although not a handbook, there are many descriptive
and illustrative details of the machines' construction, drive systems and
countershafts including sectional drawings of the various headstocks.. 50
pages.
C11C CATARACT (Hardinge) No. 5 open-headstock flat-belt drive Milling Machine.
Sales and Technical Specification Catalogue. 2 pages.
C11D CATARACT (Hardinge) MD3 and MD4 (similar to the BB4 Type) Enclosed Head
Precision Bench Milling Machines. Sales, Technical Specification and
Accessories Catalogue. 4 pages.
C11E CATARACT (Hardinge) MD5 Precision Milling Machine. Sales, Technical
Specification and Accessories Catalogue. 4 pages.
C11F CATARACT "Quick Change Swing Precision Lathe". This is the 9-inch Swing lathe with, below the chip tray, a rotating circular Collet holder and,
built into the headstock and tailstock bed feet small hinged-door storage compartments. 29 pages. (this lathe can be seen here: https://lathes.co.uk/cataract/page5.html)
C15 CAV-Wade Miniature round-bed lathe. Detailed Sales and Technical
Specification Catalogue with sectional and general-arrangement drawings. Two
Catalogues combined (one especially interesting from the USA agent) with some duplication. This
package represents all the data available for these lathes. 32 pages.
C20 CAZENEUVE HB500, HB575, HB 725 Lathes. Superbly
illustrated Sales and Technical Specification and Accessories Catalogue
with factory pictures. Dated 1960. 28 Pages.
C20A CAZENEUVE HB Toolroom and Production Lathes. Sales
and Technical Specification Catalogue 1950s. 12 pages
C20B CAZENEUVE HB500 and HB575 Lathes. Sales, Technical Specification and Accessories Catalogue. 12 Pages.
C20C CAZENEUVE HBX360 Lathe. Sales, Technical Specification and
Accessories Catalogue. 12 Pages.
C20D CAZENEUVE HBY590 Lathe. Sales, Technical Specification and
Accessories Catalogue. 12 Pages.
C20E CAZENEUVE CNX360 CNC Lathe. Sales and Technical Specification Catalogue. 14 Pages.
C20F CAZENEUVE CT200R CNC Lathe. Sales and Technical Specification Catalogue. 2 Pages.
C20G CAZENEUVE HB CN 725 and HB CN 800 CNC Lathes. Sales and Technical Specification Catalogue. 2 Pages.
C20H CAZENEUVE HB800 Lathe. Sales and Technical Specification Catalogue. 2 Pages.
C22 C.B.Ferrari Precision Miller Type MR2: Sales and Technical Specification
Catalogue. 16 pages.
CELTIC Lathes - see under Mondial
C30 CENTEC Millers. A complete data pack for the maker including Models: 2A,
2B, 2C, all the 3-Series, No. 4 and Automil Models. 34 pages of maker's Sales
and Technical Specification catalogues + the Operation Handbook.
C30A CENTEC "Low Cost Automation with Auto Pneumatic Indexing Rotary
Tables. Sales and Technical Specification Catalogue 12 pages.
C30B CENTEC Senior ROUTER. Detailed Technical Sales and Technical
Specification Catalogue. 12 pages.
C34 CERIOTTI FCB-32 Capstan Lathe. Sales and Technical Specification
Catalogue 4 pages.
C35 Ceruti Lathe and Milling Machines: Lathe Type M18 and Millers Types FV-70 and FO-70.Sales and Technical
Specification Catalogues. 12 pages.
C35A Ceruti Universal Boring Machines AB55, AB75, Series AC, Series AD, Series AF, Alematic PNP, Alematic AF80/130, Series ADM-AFM, Series ADT-AFT and A110-SL.
Sales & Technical Specification Catalogue. 12 pages
C35B Ceruti Tape Controlled Universal Horizontal Boring Mill 5-Axis Model BM80. Sales & Technical Specification Catalogue. 6 pages
C36 CHALLENGER Lathe. Sales and Technical Specification Catalogue. 8 pages.
C37 Champion Blower Forge Lathes. Sales sheets for the 9-inch, 10-inch, 13-inch and 16-inch models from the 1920s. 4 pages.
C39 Champion Lathes USA. Sales and Technical Specification Sheets. 12 pages
showing the 12, 14, 16 and 18-inch lathes as they were circa 1905 - 1920.
C42 CHARD (Western Machine Tool Works USA): Catalog set including: A 36-page
Full Range Publication with superb illustrations of the Timken-bearing lathes
with belt and gear-drive headstocks including many sectional drawings;
A full-range 12-page Catalog of the geared-head models and a 12-page Catalog
featuring the Manufacturing Lathes
C45 CHRISTEN Universal Precision Milling Machines Type U-0 and U-0A,. Sales
and Technical Specification and Accessories Catalogue 16 pages.
C45A/D12 CHRISTEN "Dan 1944" High Precision Lathe. Sales and
Technical Specification and Accessories Catalogues - One in English with 12
pages, another in German. 26 pages in all.
C45B CHRISTEN "Atlantic" High Precision Lathe. Sales and Technical
Specification and Accessories Catalogues - German Text. 6 pages.
C45C CHRISTEN 2-32 Drill Grinder Catalogues. Two Comprehensive Editions, Early and Late. 38 Pages.
C45D CHRISTEN 03-10 Drill Grinder Catalogue. 6 pages.
C45E CHRISTEN 1-32-52 Drill Point & Step Drill Grinding Machine Catalogue. 24 pages.
C45F CHRISTEN AU-150 Universal Tool Grinding Machine Catalogue. 20 Pages.
C45G CHRISTEN AF-80 Cutter & Tap Sharpening Machine. Catalogue. 8 Pages.
CHURCHILL: we have a vast stock of Churchill Sales and Specification
literature. If what you seek is not shown below, please enquire. Phone
01298-871633 e-mail your requirements :tony@lathes.co.uk
C50GJ CHURCHILL Golden Jubilee Book 1906 - 1956. A History of Precision Grinding. A fascinating and detailed interesting account of the Company, its growth and how
grinders were developed, improved and played an essential part in the manufacture of critical components
in both wartime and peace. 60 pages.
C50X CHURCHILL Grinding Machines. Full-range Catalogue circa 1930s to 1940s.
206 superbly-illustrated pages with full specification details.
C50XX CHURCHILL Grinding Machines. Full-range Catalogue circa 1940s to 1950s.
121 superbly-illustrated pages with full specification details.
C50 CHURCHILL Universal Grinding Machines (1930s and 1940s). Sales and
Technical Specification Catalogue. 12 pages.
C50A CHURCHILL Universal Grinding Machines (late 1940s and 1950s). Sales
and Technical Specification Catalogue. 20 pages.
C50B CHURCHILL Universal Grinding Machines (late 1940s and 1950s). Sales
and Technical Specification Catalogue. 20 pages.
C50C CHURCHILL Centreless Grinding Machines Model "BY". Sales and
Technical Specification Catalogue. 8 pages.
C50D CHURCHILL-Cleveland Gear Hobber Model S-8-8. Sales and Technical
Specification Catalogue. 4 pages.
C50E CHURCHILL Plain Grinding Machines "AW" and "BW".
Sales and Technical Specification Catalogue. 50 pages.
C50G CHURCHILL (Herbert)_ Precision Grinding Machines. General Catalogue with
specifications for Models: AW, BW, CW, D, E, F, FA, FB, G, TWA, TWB, TWR, DCY,
DCH, DE, CW, CRM,OH, PAW, PBW, Tool and Cutter Grinders, PCH, NB, OSB, OSD,
OSV, VXA, VL, VH, VHM, NH, VB, VBA, RA, RBY, RD, HBY,HCY, HDY, HBA, HBM,
Internal Cylinder Grinders, DUA, AC, UAC, HF, FH, BD, Cam Grinders, SHB, SHC,
EC,CE, DE, LQ, AJB, AJW, DAJ, DAX, UHR, UH, UR, and PUA. 20 pages.
C50H CHURCHILL (Herbert) BX Series 2 Cylindrical Grinding Machines. Sales and
Technical Specification Catalogue. 14 pages.
C50cw CHURCHILL CW 12" and 16" swing Plain Grinding Machines. Sales
and Technical Specification Catalogue. 16 pages.
C50dcy CHURCHILL DCY Crankpin Grinder. Sales and Technical Specification
Catalogue. 6 pages.
C50ec CHURCHILL EC Centreless Grinding Machines. Sales and Technical
Specification Catalogue. 6 pages.
C50f CHURCHILL Models F and D/E Heavy Crankshaft Grinding Machines. Sales and
Technical Specification Catalogue. 20 pages.
C50nb CHURCHILL NB Horizontal Surface Grinder. Sales and Technical
Specification Catalogue. 28 pages.
C50osc CHURCHILL OSC Horizontal Spindle Surface Grinder. Sales and Technical
Specification Catalogue. 8 pages.
C50osb CHURCHILL OSB Horizontal Spindle Surface Grinder. Two Sales and
Technical Specification Catalogue. 16 pages.
C50osd CHURCHILL OSD Open Side Surface Grinding Machine. Sales and Technical
Specification Catalogue. 8 pages.
C50pah CHURCHILL PAH, PBH and PCH Universal Grinding Machines. Sales and
Technical Specification Catalogue. 16 pages.
C50paw CHURCHILL PAH Universal Grinding Machines. Detailed Sales and Technical
Specification Catalogue. 50 pages.
C50pbw CHURCHILL PBW Universal Grinder. Sales and Technical Specification
Catalogue. 20 pages.
C50pch CHURCHILL PCH Universal Grinding Machine. Sales and Technical
Specification Catalogue. 16 pages.
C50ph400 CHURCHILL PH400 Gear Hobbing Machine. Sales and Technical
Specification Catalogue. 22 pages.
C50shear CHURCHILL GEAR SHAVING MACHINES. Sales and Technical Specification
Catalogue.16 pages.
C50K CHURCHILL Vertimax No. 3 Chucking Lathe. Sales and Technical
Specification Catalogue.16 pages.
C50L CHURCHILL PH-1612 Hobbing Machines. Sales and Technical Specification
Catalogue.28 pages.
C50M CHURCHILL 450CNC Turning Machine. Sales and Technical Specification
Catalogue.20 pages.
C50N CHURCHILL Computurn 290 Lathe. Sales and Technical Specification
Catalogue.12 pages.
C50P CHURCHILL HB600 Horizontal Boring and Milling Machine. Sales and
Technical Specification Catalogue.10 pages.
C50Q CHURCHILL HB1200 Horizontal Boring and Milling Machine. Sales and
Technical Specification Catalogue.10 pages.
C50R CHURCHILL 250NC Universal Turning Machine. Sales and Technical
Specification Catalogue. 20 pages.
C50S CHURCHILL 350NC Universal Turning Machine. Sales and Technical
Specification Catalogue. 20 pages.
C50T CHURCHILL Red Century 1250NC T-bed twin-tool Contouring Lathe. Sales and
Technical Specification Catalogue. 8 pages.
C50U CHURCHILL CA500 Single Spindle Chucking Automatic Lathe. Sales and
Technical Specification Catalogue. 24 pages.
C50V CHURCHILL CTC4 slant-bed lathed twin-tool Contouring Lathe. Sales and
Technical Specification Catalogue. 6 pages.
C61 CHURCHILL (Churchill-Denham) OC28 Oil Country Lathe. Sales and Technical
Specification Catalogue. 6 pages.
C62 CHURCHILL-REDMAN early 7-inch centre-height lathe - geared and flat-belt
headstocks. Sales and Technical Specification Catalogue. 4 pages.
C62A CHURCHILL-REDMAN very early 8.5-inch centre-height lathe - flat-belt
headstock. Sales and Technical Specification Sheet. 2 pages.£8
C62B CHURCHILL-REDMAN 30" and 36" Square planing Machines. Sales
and Technical Specification Sheet. 3 pages.
C62C CHURCHILL-REDMAN CUB Technical Sales and Technical Specification
Catalogue - with superb illustrations. 12 pages.
C62D CHURCHILL-REDMAN CUB: Blue Print of 3-speed gearbox on leadscrew end and
changewheel-carrying arm (banjo). Blue print of Apron.
C62E CHURCHILL-REDMAN "C-R" Cone-drive Precision lathes 12 and
16-inch swing. Sales and Technical Specification Catalogue 12 pages.
C62F CHURCHILL-REDMAN "C-R" Helical-geared Head Precision lathes 12
and 16-inch swing. Sales and Technical Specification Catalogue. 22
pages.£25
C62L CHURCHILL-REDMAN Lathes: Heavy-duty 22L and 28L; Type CR Helical Geared 12 and 16-inch swing; Types 7NM, 7NM and 11NM; Types CR "Cone Drive" (flat-belt drive) 12 and 16-inch swing
and "Heavy Dury" 14-inch swing in Cone and geared headstock versions. A set of Detailed Sales and
Technical Specification Catalogues with screwcutting charts. 42 pages.
C62M CHURCHILL-REDMAN C-R and Heavy-duty 18 and 24-inch Shapers. Detailed Sales and Technical Specification
Catalogues. 24 pages.
C100C CINCINNAT Milling Machines and Universal & Reamer Grinders: Full-range
catalog dated 1913. A superb, beautifully-illustrated publication that shows the
full range of machines and accessories together with a "Tour of the Works"
and a number of interesting technical articles detailing the machines' design
and construction. 134 pages.
C100D CINCINNATI Full-range Catalogue 1924. A superb, 135-page beautifully-illustrated publication that shows the
full range of machines and accessories together with a "Tour of the Works"
and a number of interesting technical articles detailing the machines' design
and construction. 135 pages.
C100E CINCINNATI Full-range Catalogue 1961. Rare 71-page publication listing
Milling machines, Broaching Machines, Cutter and Tool Grinding Machines,
grinding Machines, Grinding Wheels, Selective Hardening Machines, Metal Forming
Machines, Special Machine Tools, Accessories.
C101 CINCINNATI Hydrashift Lathe. Sales and Technical Specification Catalogue
1962 24 pages.
C101A CINCINNATI Hydrashift Lathe. Sales and Technical Specification
Catalogue 1967 24 pages.
C101B CINCINNATI "Tray Top" Cintilathe Lathe (early version). Sales and Technical Specification
Catalogue. 6 pages.
C102 CINCINNATI No. 2 Tool and Cutter Grinder Catalogue Collection including:
First Edition, 1931 with 32 detailed pages;
1934 with 6 pages;
1939 with 34 detailed pages;
1948 with 12 pages;
1972 with 12 pages.
C102A Cincinnati Monoset Tool & Cutter Grinder. Detailed Sales and Technical Specification Catalogue. 16 Pages.
C103C Cincinnati Dial Type Milling Machines. Mid 1930s Sales, Accessories and
Technical Specification Catalogue. Superbly illustrated and very detailed. 40
pages.
C103D Cincinnati Dial Type Milling Machines - late models Types 207-12 and
307-12 and ELR. Sales, Accessories and Technical Specification Catalogue. 8
pages.
C224E Cincinnati Dial Type Milling Machines late models Types 315-15, 415-15,
420-16 and 520-16. Sales, Accessories and Technical Specification
Catalogue. 24 pages.
C224F Cincinnati Dial Type Milling Machines Types 520-20, 540-20, 620-20 and
640-20 and ELA. Sales, Accessories and Technical Specification Catalogue. 24
pages.
C224G Cincinnati Dial Type Milling machines Nos. 3 and 4 Model OM. Sales,
Accessories and Technical Specification Catalogue. 28 pages.
C222 Cincinnati TOOLMASTER Precision Milling Machine. Early "rounded
style" machines Models A, B, C, D, E and H-s. Sales, Accessories and
Technical Specification Catalogue. 24 pages.
C222A Cincinnati TOOLMASTER I-D Precision Milling Machine (early "rounded
style"). Sales, Accessories and Technical Specification Catalogue. 6
pages.
C222B Cincinnati TOOLMASTER Precision Milling Machine Model DD with the later
"angular style". Sales, Accessories and Technical Specification
Catalogue. 16 pages.
C222C Cincinnati TOOLMASTER Precision Milling Machine Model MT - the last
version manufactured. Rare Sales, Accessories and Technical Specification
Catalogue. 16 pages.
C223 Cincinnati CONTOURMASTER Tool and Die Milling Machine Models 1A, 1B, 1B.
Sales, Accessories and Technical Specification Catalogue. 24 pages.
C223A Cincinnati CONTOURMASTER Tool and Die Milling Machine Models 1B, 1B.
later Sales, Accessories and Technical Specification Catalogue. 16 pages.
C223B Cincinnati 8" x 18" Tool and Die Milling Machine. Sales,
Accessories and Technical Specification Catalogue. 20 pages.
C224 Cincinnati No.2 M1 Plain and Universal Milling Machine. Sales, Accessories
and Technical Specification Catalogue. 30 pages.
C224A Cincinnati Milling Machines 1-18. Sales, Accessories and Technical
Specification Catalogue. 8 pages.
C224B Cincinnati "Cinedo" Milling Machines. Very detailed Sales,
Accessories and Technical Specification Catalogue with useful annotated
control diagrams. (1967). 38 pages.
C224C Cincinnati CINOVA 80 Milling Machine Sales, Accessories and Technical
Specification Catalogue. 46 pages.
C224H Cincinnati 205-12 MI Milling Machines Sales, Accessories and Technical
Specification Catalogue.33 pages.
C224J Cincinnati I-18 Automatic Milling Machine Catalogue. 8 pages.
C224K Cincinnati CONTOURMASTER Milling Machine Catalogue. 14 pages.
C224L Cincinnati HYDROTEL 16" Milling Machine Catalogue. 24 pages.
C224M Cincinnati HYDROTEL 28" Vertical Milling Machine Catalogue. 18
pages.
C224N Cincinnati HYDROMATIC 3-36 Plain and Duplex Milling Machine Catalogue.
6 pages.
C224P Cincinnati HYPOWERMATIC Milling Machine Catalogue. 29 pages.
C224Q Cincinnati HYPOWERMATIC Tracer Controlled Milling Machine Catalogue. 29
pages.
C230 Cincinnati Milling Machine Accessory Leaflets: Wide Range Divider to fit
Cincinnati Milling Heads with table of angular divisions. 4 pages. 10",
12" and 14" Dividing Heads, Slotting Attachment Head, Precision
Measuring Equipment (length rods), 12", 16", 20" and 24"
Circular Milling Attachments. 16 pages.
C230A Cincinnati Milling Machines Spindle Attachments Catalogue. A fascinating
publication showing the various vertical heads, adaptations and accessories to
mount on Cincinnati milling machines. 12 pages.
C230B Cincinnati Arbors and Adaptors Catalogue. Shows the full range of
Spindle Arbors, Adaptors and the "Arbor-Loc" system. 24 pages.
C250 Cincinnati 10" and 14" Filmatic Plain Hydraulic Cylindrical
Grinding Machines Catalogue. 24 pages.
C250A Cincinnati No. 2 Centreless Grinder Model OM Catalogue. 12 pages.
C250B Cincinnati No. 3 Centreless Grinder Catalogue. 16 pages.
C250C Cincinnati Model LR "Centuramic" Centreless Grinder Catalogue.
16 pages.
C326 CLARKSON Tool and Cutter Grinder. Sales and Technical Specification
Catalogue 6 pages.
C328 Clarkson Tool and Cutter Grinder Machine and Accessories Catalogue 12
pages.
C330 CLAUSING (USA) "Dual" Metal and Wood Lathe Catalogue. The
earliest known - 1938. Shows the first No. 10 lathe - later named the 100 12
pages.
C332 CLAUSING 1940 Catalogue showing the Models 100, 101, 102, 103, 104, 105,
106, 107, 108, 109, 110, and 111 12-inch swing lathes and Accessories 16
pages.
C334 CLAUSING 1943 Catalogue (No. 44A) showing the Models 100, 102, 103, 106,
109 12-inch swing lathes and Accessories 16 pages.
C336 CLAUSING 1945 Catalogue (No. 46A) showing the Models 100, 102, 103, 105,
108, 111 12-inch swing lathes and Accessories 12 pages.
C338 CLAUSING 1950 Catalogue showing the full range of 100 and 200 Series
lathes and Accessories 16 pages.
C339 ALL THE ABOVE EARLY CLAUSING CATALOGS for the 100 and 200 range.
C340 Clausing Model 6300 12-inch Lathe Catalogue with Accessories 14 pages.
C342 Clausing Model 5300 12-inch Lathe Catalogue with Accessories 14 pages.
C344 Clausing Model 4800 12-inch Lathe Catalogue with Accessories 14 pages.
C345 Clausing 4900 10-inch lathe Catalogue with Accessories 14 pages.
C346 Clausing Sales and Technical Specification Catalogue for the 1"
collet capacity Series 200 lathe 6 pages.
C348 Clausing Lathes: full-range Catalogue (1961) 16 pages.
C350 Clausing Lathes Accessories: Catalogue (1961) 8 pages.
C352 Clausing Late-model 1300, 1500 and the "14-inch" Variable-speed lathes. Two Sales and Technical
Specification Catalogue 20 pages.
C353 Clausing/Colchester 13", 15" and 17" Sales and
Technical Specification Catalogue. 4 pages.
C354 Clausing/Colchester 13" and 15" Detailed Sales and Technical
Specification Catalogue late 1950s early 1960s "Round-head" lathes 16
pages.
C355 CLAUSING Model 14 New-style 14.5" swing model with dial-selection of
spindle speeds. 12 pages.
C356 Clausing full-range Catalogue showing the lathes of the 1960s and 1970s.
Contains full details of all the lathes (including imported and re-badged
English Colchester models): 17 -inch, 15-inch, 13-inch; 6900 Series (14-inch);
5900 Series (12-inch); 4900 Series (10-inch) and Accessories for the full
range. Vertical and Horizontal Millers and Drill Presses. 82 pages.
C357 Clausing Lathe Catalogue 1969: 13", 15" and 17" lathes
and accessories 20 pages.
C358 CLAUSING VERTICAL MILLER Model 8520 and 8525 Sales and Technical
Specification Catalogue 6 pages.
C358A CLAUSING VERTICAL MILLER Model 8530 and 8531 Sales and Technical
Specification Catalogue and HORIZONTAL MILLER 8540, 8541, 8550 and 8551 10
pages.
C360 CLEMENT Watchmakers' Lathes (USA): "The Clement Master Watchmakers'
Lathe Outfit". A very rare Sales and Technical Specification Booklet.
1923 – perfect copy. A remarkably eccentric production with not only technical
details of the lathe and its accessories also home-sum business philosophies
and Strange homilies. 20 pages.
C360a/MC235 CLEMENT Watchmakers' Lathe "Instructions for Use of
Attachments" together and a separate publication "Attachments
Catalog"
C360b Clement Watchmakers' Lathes: 1927 Catalogue with "blue print"
showing improvements to the lathe. CD-ROM or print. 12 pages.
C360c Clement watchmakers' Lathes: Sales and Technical Specification
Catalogue and Price-lists from 1946 showing the Standard Lathe, Pivot Polisher,
the Combined Lathe Attachment and the Clement Manufacturing Lathe. 8 pages.
C360d Clement Watchmakers' Lathes: all the above Clement literature:
CLEMENT
C365 CLEVELAND (USA) Pivot-head Turret Miller Series BM: Sales and Technical
Specification Catalogue 8 pages.
C365A CLEVELAND (USA) Dial Type Milling Machines. Sales and Technical
Specification Sheet with specs of models "u, 3U, 4H, 5H, 6H, 4HM, 5HM,
6HM, 2V, 3V, 4V, 5V, 6V 4 pages.
C365A CLEVELAND (USA) Straight-sides Single Crank Presses. Detailed Sales and
Specification Catalogue. 24 pages.
C367 CME (Maquinaria CME SA) Milling Machines All-Models Sales and Technical Spcification and Accessories Catalogue.
Covers the models FU-0, FU-1, FU-1S, FU-1E, FU-2 and FU-2-CM
English, French, German and Spanish text. 20 pages.
C370 COCHRANE-BLY Universal Vertical Miller-Shaper. Interesting Sales and Technical
Specification catalogue. 8 detailed pages.
C370A COCHRANE-BLY Complete Product Range Catalogue showing the BLY Universal Vertical Miller-Shaper
(8 pages including accessories) and the sawing machines No.1, No.2B, No.4C, No.5, No.6, No.66, No.666 and No.7.
The No.21 and No.21-SA High-speed saws, the No.11 Automatic Saw Sharpening Machine, the Bench Filing Machine and
the No.2 Floor-standing Filing machine. 32 Pages.
C389 COLCHESTER LATHES - Factory Tour 1960s showing elements of the
manufacturing process, assembly, etc. 22 pages.
c390 COLCHESTER LATHES - A full set of very early Catalogues for the Bantam,
Master, Triumph and Mascot from the late 1920s to early 1950s. These show both
the open flat-belt drive and geared-headstock types. 40 pages. (see below
for individual catalogues from the set)
C390A COLCHESTER BANTAM 5-inch 1920s and 1930s Flat-belt Drive Model. Sales
and Technical Specification Catalogue. 4 pages.
C390B COLCHESTER MASTER 6-inch 1920s and 1930s Flat-belt Drive Model. Sales
and Technical Specification Catalogue. 4 pages.
C390C COLCHESTER MASTER 6-inch 1930s to mid-1940s Geared-head Model. 2 Sales
and Technical Specification Catalogues showing the Changewheel and Screwcutting-gearbox
versions. 8 pages.
C490D COLCHESTER TRIUMPH 7-inch 1920s and 1930s flat-belt drive model. Sales
and Technical Specification catalogue. 4 pages.
C390E COLCHESTER TRIUMPH 7-inch 1930s to mid-1940s Geared-head Model. 2 Sales
and Technical Specification Catalogues showing the Changewheel and
Screwcutting-gearbox versions. 8 pages.
C390FG COLCHESTER MASCOT 8-inch 1920s and 1930s Flat-belt Drive and Geared
Head models. Two Sales and Technical Specification Catalogues. 8 pages.
C390H COLCHESTER "PRECISION"
7-inch lathe. Rare geared-head Toolroom Colchester of the 1930s. Sales and
Technical Specification Catalogue. 4 pages.
C390J COLCHESTER MASTER 6.5-inch mid-1940s to early 1950s Geared-head Model. 2
Sales and Technical Specification Catalogues. 8 pages.
C390K COLCHESTER TRIUMPH 7.5-inch mid-1940s to early 1950s Geared-head Model.
Sales and Technical Specification Catalogue. 4 pages.
C390L COLCHESTER MASCOT 8.5-inch mid-1940s to early 1950s Geared-head Model.
Sales and Technical Specification Catalogue. 4 pages.
COLCHESTER LATHES - from the early 1950s onwards:
C395 COLCHESTER BANTAM 5-inch "800 Mk 1" Sales and Technical
Specification Catalogue 4 pages.
C395A COLCHESTER CHIPMASTER 5-inch 4 Sales and Technical Specification
Catalogue with 2, 4, 6 and 8 pages.
C395B COLCHESTER STUDENT 6-INCH Mk.1 1950s Models. 4 Sales and Technical
Specification Catalogues with 4, 6, 8 and 12 pages. A full data pack for the
lathe.
C395C COLCHESTER MASTER 6.5-INCH Mk.1 1950s Models. 4 Sales and Technical
Specification Catalogues with 2, 4, 6 and 8 pages.
C395D COLCHESTER TRIUMPH 7.5-INCH Mk.1 1950s Models. 3 Sales and Technical
Specification Catalogues with 2, 4 and 8 pages.
C395E COLCHESTER MASCOT 8.5-INCH Mk.1 1950s Models. 4 Sales and Technical
Specification Catalogue with 2, 4, 6 and 6 pages.
COLCHESTER LATHES from the 1960s ONWARDS:
C400A COLCHESTER BANTAM 1600 Mk 1 ("rounded" headstock) Sales and
Technical Specification Catalogue. 4 pages.
C400B COLCHESTER BANTAM 800 Mk 2 ("square" headstock) Sales and
Technical Specification Catalogue. 4 pages.
C400C COLCHESTER BANTAM 1600 Mk 1 ("rounded" headstock) Sales and
Technical Specification Catalogue. 4 pages.
C400D COLCHESTER BANTAM 2000 Sales and Technical Specification Catalogue. 10
pages.
C401 COLCHESTER CHIPMASTER Sales and Technical Specification Catalogue. 10
pages.
C370A COLCHESTER Student Mk 2 Sales and Technical Specification Catalogue. 6
pages.
C370B COLCHESTER Student 1800 Sales and Technical Specification Catalogue. 12
pages.
C370C COLCHESTER Student 2500 Sales and Technical Specification Catalogue. 4
pages.
C370C COLCHESTER Student 3100 Sales and Technical Specification Catalogue. 7
pages.
C371A COLCHESTER MASTER Mk 2 Sales and Technical Specification Catalogue. 7
pages.
C371 COLCHESTER MASTER 2500 Sales and Technical Specification Catalogue. 10
pages.
C371 COLCHESTER MASTER VS3250 Sales and Technical Specification Catalogues (2
issues) 6 pages.
C372A COLCHESTER TRIUMPH (15" swing) Mk 1: Sales and Technical
Specification Catalogue 4 pages.
C372B COLCHESTER TRIUMPH 2000 Sales and Technical Specification Catalogue 10
pages.
C372C COLCHESTER TRIUMPH VS2500 Sales and Technical Specification Catalogue 10
pages.
C372Z COLCHESTER Triumph HYDROPOWER Multi-purpose manual and Auto-Cycle Lathe
with Multi-cut Copying Equipment. Sales and Technical Specification
Catalogue. 14 pages. C373C COLCHESTER MASCOT 1600 First Edition highly
detailed Sales and Technical Specification Catalogue. 18 pages.
C373D COLCHESTER MASCOT 1600 Simplified Sales and Technical Specification
Catalogue. 4 pages.£12
C373E COLCHESTER MASCOT VS2000 Sales and Technical Specification Catalogue. 4
pages.£12
C374 COLCHESTER MASTIFF 1400 Sales and Technical Specification Catalogue. 8
pages.
C374A COLCHESTER MASTIFF VS1800 Sales and Technical Specification Catalogue.
4 pages.
C380 COLCHESTER MAGNUM 1250 Sales and Technical Specification Catalogue. 5
pages.
C390 COLCHESTER FULL-RANGE CATALOGUE 1970s machines: Bantam, Chipmaster,
Student 1800, Master 2500, Triumph 2000, Mascot 1600, Mastiff 1400, and Full
Accessories Lists. 30 pages.
Colchester CNC Lathes
C395 COLCHESTER CNC Lathes - a Sixteen Catalogue Set showing the: Combi 6000, Combi K,
CNC2000, CNC 350, CNC 500, CNC 2000L, CNC1000, CNC 1000L, CNC2000L, CNC 3000, CNC 3000L,
CNC400, CNC 4000L, CNC 5000, Electronic Mastiff, 3 x Tornado catalogues and CNC versions of the Master 2500, Triumph 2000, Mascot 1600 and Mastiff 1400. 129 pages
C395C COLCHESTER ALPHA Computer-assisted lathes: Models: 330, 400, 460, 550
and 800. 4-page Specification Catalogue.
C393D COLCHESTER Lathes Range Catalogue 1999. Features CNC and conventional
models: Tornado A50, Tornado A90, Tornado 119, Tornado 210, Tornado 310, Combi
2000, Combi 3000, Combi 4000, Bantam 2000, Student 2500, Master VS3250, Triumph
VS2500, Mascot VS2000, Mastiff 1800, Magnum 1250 and Magnum LB800. 12 pages.
C395X COLCHESTER HYDRO NC450 Numerically Controlled lathe. Sales and
Technical Specification Catalogue. 14 pages.
C490 COLUMBIA (USA) No. 1 Vertical Milling Machine Sales and Technical
Specification Catalogue 4 pages.£12
C492 Cordia Drilling, Milling & Tapping Machines (Bohren, Frasen & Gewindeschneiden) S18, S18G, S23, S23G, S30, S30G, S30V, S30VG, S40V, S40VG, 13-1, 13-11,
Cordia 18, Cordoa 23, Cordia 30, Cordia A30, GW30, GW30L, BF26, Sales & Specification Catalogue in English,
French and German. 20 pages.
C495 CONOVER LATHES:
C498 Cooksley Woodworking Machinery. Complete (well-illustrated and described) Full-range Catalogue including Sawbences, Circular Saws Rise and Fall Tables, Crosscutting and Trenching Machines,Bandsaws, Planing and Rebating Machines, Surface Planers, Universal Woodworkers, Thicknessing Machines, Planing and Thicknessing Machines, Hollow Chisel Mortising and Boring Machines, Chain and Hollow Chisel Mortishing Machines, Spindle Moulders, Belt Sanders, Lathes, Floor Sanding Machines, Tool and Cutter Grinder, Scroll and Jig Sawing Machines and Accessories. 40 Pages.
C498A Cooksley Types UV3, LBBM 1, LBBM 2 and LBM 4 Universal Woodworkers. Detailed Sales and Technical Specification Catalogues. 10 pages.
CORONA Drills - see under the makers POLLARD
C500 CORONET ELF Wood Turning Lathe and Accessories Assorted advertising
Sheets. 22 pages.
C501 Coronet Major Wood Lathe and Accessories Sales and Technical
Specification Sheets. 12 pages.
C502 Coronet "Wood Working and Wood Turning on Universal and Independent
Machines" Booklet showing the Coronet range and the sort of work they
could undertake. 31 pages.
C525 Correa Milling Machines. Full-range Catalogue from the early 1980s.
Covers the F2U-E, F3U-E, FU-10, FU-15, FU-20, F2V-E, F3V-E, F2M-U, the VC Self-powered and geared ram,
Production machines with Automatic Cycles, Paraxial Positioning Numerical Controls and Accessories. 34 pages.
C525A Correa Milling Machines Types A20/18, A20/25, A20/35, B12, B20, BV12 and BV25. Sales,
Specification and Accessories Catalogues. 18 pages.
C550 COS-PAR Dividing Heads. Instructions for Use with Parts as Sectional
Drawings and extensive Indirect and Differential Tables.
C570 Covel Grinders: No. and No.15 Surface and No. 22 Universal Tool & Cutter. Sales & Technical Specification Catalogs. 29 pages.
C600 CRAFTSMAN/COMPANION/DUNLAP (USA): compilation of all 95 pages from the
Craftsman Catalogues that show metal-turning lathes. Covers: 1929, 1930, 1932,
1933, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942 and 1943 - when the
Catalogue was withdrawn..then 1948, 1949, 1950, 1952, 1953, 1954, 1955, 1957
and 1960/61 86 pages.
C602 CRAFTSMAN "The Wood Lathe" An instructional booklet to accompany
the firm's wood-turning lathes. Published from the 1930s to the 1960s. 32
pages.
C605 CRAIG and DONALD Power Presses. Sales and Specification Catalogue. 55
page.
C610 CRAVEN Vertical Boring and Turning Mills. Technical Sales and
Technical Specification Catalogue 1953 for the 5 foot to 20 foot machines with
useful details of the operator's controls, screwcutting and taper turning
possibilities. 24 pages.
C610A CRAVEN Wheel Lathes for Railway Wheel Sets. Sales and Technical
Specification Catalogue.24 pages.
C610B CRAVEN Worm Thread Grinding Machine. Technical Sales and Technical
Specification Catalogue. 8 pages.
C12 CRAWFORD-SWIFT see under SWIFT
MC545 CRAWFORD Collets Data Pack: standard collets and Crawford Multi-Bore Collets and Collet Chucks in standard and
power-feed forms (Pneumatic and Hydraulic): a three-part book, the first with applications by makers, a second
41-page identification section with drawings of collets and their dimensions and a third edition showing the.
Makers covered include: Bechler, Boley, Boley Leinen, Boxford, Bridgeport, Brown & Sharpe, Brown & ward, B.S.A., B.S.A.Gridley, Cataract, Conomatic, Colchester, C.V.A., Davenport,
Dowding & Doll, EMI-MEC, Feinler, Gildmaster, Habbeger, Herbert, Index, Iralag, Marlco, Manhurin, Peterman, Pittler, Pultra, Schaublin, Schutte, Smart & Brown, Strohm, Tarex, Tornos, Traub, H.W.Ward and Wickman.
Please note: this is not a service and repair manual but does appear to be the totality of data published by the company on collets and their various chucks.
C620 CROFTS B.O.M.-L Clutches - detailed Catalogue with useful sectional
drawings 50 pages.
C700 MC530 CROMWELL (Smallpiece) Precision Lathe Manual. A compendium of all
the available Cromwell literature (including a Sales and Technical
Specification catalog for the 4-inch Mk.2 Model) that includes Sectional Parts
Drawings of the whole lathe (for English and Metric gearboxes) Wiring Diagrams,
Operating Instructions and a reproduction of four original Catalogues showing
all the accessories.
C750 CROSS (USA) No.20 Universal Milling Machine Sales and Technical
Specification Catalogue 6 pages.
C752 CROUZET TC125 lathe (Model 86.105) sales and Accessories catalogue
(French Text) 4 pages.
C752A CROUZET General Catalogue. Includes lathes models: 86.105, 86.106,
86.107, 86.123. Milling machines Types: 86.206, 86.202, 86.204, 86.207 and presses,
etc. (French Text) 27 pages.
C755 CROWTHORN Lathes. A set of complete-range, well-illustrated and detailed Sales,
Technical Specification and Accessories Catalogues spanning the 1950s and 1960s with
details of the following Models: 7.5" MD, 8.5" MD; 10.5" HD, 12" & 12.5", 15" & 18"
and 15" & 18" HD; 27" swing, the "New Crowthorn Mk.2", 30" & 36" swing Boring &
Facing Lathes; 8.5" (17"-swing) Boring, Parting-off and facing lathe; 10.5" and
12.5" Combination Turret Lathes; the 19.5" shaper and sets of price lists and
delivery times, etc. 95 pages.
C755A Crowthorn 19.5-inch Shaper. Sales, Specification & Accessories Catalogue. 5 pages.
C755B Crowthorn Type MD 7.5-inch and 8.5-inch Lathes (late models with three in-line, downward-pointing levers on the front face of the headstock). Two detailed, well-illustrated Sales, Technical Specification and Accessories Catalogues. 18 pages.
C755X We also have a large collection of individual Crowthorn Sales,
Accessories and Technical Specification Catalogues and can provide data about
most of their models.
C760 CROWNINGSHIELD (USA) Horizontal and Vertical Milling Machines Complete
Range Sales and Technical Specification Catalogue 6 pages.
C762 CRYER and DAWSON "Stalwart" lathe: Sales and Technical
Specification Catalogue. 4 pages.
C770 CRYSTAL LAKE Precision Bench Lathe. Sales and Technical Specification
Catalogue circa 1930s/1940s. 4 pages.
C770A CRYSTAL LAKE Precision Bench Universal Grinder (USA). Unusually small and
finely-made precision machine. Sales and Technical Specification Catalogue
circa 1930s/1940s. 6 pages + letter from maker.
C780 SCEPEL Radial-arm Drills Range Catalogue with annotated control diagrams
covering Models: RF-50/1000, RF-1250, RF-1600, RFh-75/1500, RFh-1750, RFh-2000,
RFh-100/2250 and RFh-3000. 24 pages. C790 CUNCLIFF and Croom (Manchester
England) Machine Tool Catalogue showing Lathes, Milling Machines, Horizontal
Borers, Planers, Planer-Millers, Gear Cutter, Railway Wagon Wheel Lathes,
slotters, etc. Circa 1910. 70 pages.
C790A CUNLIFFE and CROOM No. 2 Milling Machine: Sales and Technical
Specification Catalogue. 28 pages.
C790B CUNLIFFE and CROOM Machine Tool Catalogue. A comprehensive, all-models edition covering machines
as made during the 1920s and 1930. Includes borers, planers, slotting machines, lathes, milling machines, planer-type milling machines,
slot and keyway machines, disc grinders, universal dividing headstocks, mandrel presses, machine vices, locomotive wheel quartering machines,
drilling & tapping machines, axle brass boring machine, boring and turning mills, etc .Pipe flange drilling machine, broaching machines,
wheel cutting (gear cutting) machine, and a gear hobbing machine. 72 pages.
C795 CUBAR Crankmaster Crankshaft Turning Lathe by Dunbar & Cook ltd. Sales and Technical Specification Catalogue. 4 pages.
C800 CVA 1 and 1A Series Super-Precision Toolroom lathe. Collection of early to
late Sales and Technical Specification Catalogues including the last
"Coles-built" machines. (CVA Handbook, Spares Parts Lists and
Sectional Drawings also available) 41 pages.
C800A CVA Precision Bench Plain-turning, Second-operation Lathes and Miniature
Precision Capstan Lathes. 4 Sales and Technical Specification Catalogue
giving a complete data pack for these machines. 24 pages.
C800B CVA No. 79 vertical miller. Sales and Technical Specification Sheet. 2
pages.
D4 Daewoo Lathes (Namsun Machinery Works Korea) Sales & Technical Catalogues. Lathes Types NSL, NSL400, NSL450, NSL550 and NSL700. 6 pages. 6 pages
D4A Daewoo Milling Machines (Namsun Machinery Works Korea) Sales & Technical Catalogues. Turret NSM-U, Vertical NSM-V and Horizontal NSM-H. 6 pages.
D5 Dainichi Machine Tools. Sales and Technical Specification Catalogues - the DUM "Combined lathe, Shaper, Drills & Milling" Models 1GA, 2GA,3GA, 4GA, 5GA, 3GA-S, 4GA-S, 5GA-S, 2GB, 3GB, 4GB, 1GA-2, 2GA-2 and "Company History with CNC, Massive & Heavy Duty Roll,
and Engine Lathes and Special Machines and Universal Machine Tools. 24 pages.
D6 DALE Lathe. A 10-inch centre height machine of unknown origin. 4-page Sales & Technical Specifcation Catalogue.
D05 DALRAE MIDGEMILL and SPEEDMILL Vertical Milling Attachments. Detailed
Sales and Technical Specification Catalogue. 6 pages.
D10 Dalton Catalog Collection covering Combination Machine and 7-inch, 8-inch
and 9-inch lathes. 36 pages.
D13 DAREX Drill, End mill and Tap & Countersink Sharpeners. Four well-illustrated and descriptive Sales & Technical Specification Catalogues.
8 pages + price lists.
D15
DARLING and SELLERS Full-range Lathes & Accessories Catalogue cira 1900-1914s. Flat-belt-drive and geared-head models in sizes from
7-inch to 12.5-inch centre height. 38 pages.
D15A
DARLING and SELLERS 10.5-inch Lathe. Two comprehensive Sales and Technical
Specification Catalogues, one early, the other late. 24 pages.
D17 DANCKAERTS British Wood Working Machinery: Sales and Technical
Specification Catalogue. 12 pages.
D18 DAVIS = Stuart Davis = "SDM" Precision CNC Cylindrical Grinders
Model CNC 450 Sales and Technical Specification Catalogue. 4 pages.
D19 DEAN, SMITH and GRACE 1926 Catalogue - the earliest known in mint condition "A Lathe and More About Lathes". Shows the full range of lathes and their accessories,
typical machining jobs (some very complicated) and how they are set up. It also has many pages about the design with examples of the advantages and disadvantages
of various approaches to the headstock carriage, tailstock, leadscrew, leadscrew nuts, clutches, drive systems and tooling, etc. 60 pages.
D20 DEAN, SMITH and GRACE: circa 1890 full-range Catalogue showing lathes,
millers, drills, bending machines, saws, surfacing, buffing, grinding,
slotting, punching and boring machines, planers, keyway cutters, chucks,
tooling, etc. 80 pages.
DEAN, SMITH and GRACE Historical Collection:
1) 1926 Booklet "A Lathe and More About Lathes" 1926. Shows a range of DSG lathes and their accessories and explains elements of their
design and structure. Elements covered include examples of the advantages and disadvantages of various designs and approaches to the
headstock carriage, tailstock, leadscrew, leadscrew nuts, clutches, drive systems and tooling, etc. Covers a range of attachments and
how major parts including headstocks, aprons, saddles and screwcutting gearboxes were set up for machining and how final testing was done. 60 pages.
2) DEAN, SMITH & GRACE Book "A Little Farm Well Tilled".A well-illustrated and interesting publication circa the early 1960s that covers the history of the Company. 79 pages
3) Catalogues Covering the 1930s to 1940s. "A Short History of the Firm of Dean, Smith & Grace", the "Minor" (13Z) Lathe and the Models A & B in all their configurations. 40 pages.
4) Catalogue 1939 Production Lathes. 24 pages. A total of 203 pages.
D20B DEAN SMITH and GRACE 1948 Catalogue showing the Model A and B lathes
in all their configurations. 22 pages.
D20C DEAN, SMITH and GRACE 1950s Full Range Sales and Technical
Specification and Specification Catalogue (small format) 24 pages.
D20D Dean Smith and Grace Lathes. 1960s Full-range Sales and Technical
Specification and Specification Catalogue. 24 pages.
D20E DEAN, SMITH and GRACE: 1970s Full-range Sales and Technical
Specification and Accessories Catalogue. 32 pages.
D20F DEAN, SMITH and GRACE Centenary Booklet 1965. Detailed description of
the Company's development. Includes a comprehensive factory tour showing the
entire production process from casting to final testing. 60 pages.
D20G DEAN, SMITH and GRACE Book "A Little Farm Well Tilled". A
well-illustrated and interesting publication circa early 1960s covering the
history of the Company. 82 pages.
D20H Dean Smith and Grace 30 and 36XS Lathes. Sales and Technical
Specification Catalogue. 18 Pages.
D20J Dean Smith and Grace 13-07 Lathe. Sales and Technical Specification
Catalogue. 18 Pages.
D20K Dean Smith and Grace 15 and 17-inch lathes. Sales and Technical
Specification Catalogue. 22 Pages.
D20K2 Dean Smith and Grace 1609 Lathe. Detailed Sales & Technical Specification Catalogue.
D20L Dean Smith and Grace 16-09 Lathe and 16-09 Hydraulic Copying Units.
Sales and Technical Specification Catalogues. 46 Pages.
D20M Dean Smith and Grace 16-09ct Lathe. Sales and Technical Specification
Catalogues. 16 Pages.
D20N Dean Smith and Grace 17-09 Lathe. Sales and Technical Specification
Catalogues. 16 Pages.
D20P Dean Smith and Grace 18a-21 Lathe. Sales and Technical Specification
Catalogue. 26 Pages.
D20Q Dean Smith and Grace 19-10 and 21-12 Lathes. Sales and Technical
Specification Catalogue. 14 Pages.
D20R Dean Smith and Grace 19-10t Lathe. Sales and Technical Specification
Catalogue. 8 Pages.
D20S Dean Smith and Grace 21-12sb Lathe. Sales and Technical Specification
Catalogue. 14 Pages.
D20T Dean Smith and Grace 22-25 and 26-30 Lathes. Sales and Technical
Specification Catalogue. 28 Pages.
D20U Dean Smith and Grace 24-15 Lathe. Sales and Technical Specification
Catalogue. 16 Pages.
D20V Dean Smith and Grace 30TC Numerically Controlled Lathe. Sales and
Technical Specification Catalogue. 32 Pages.
D20W Dean Smith and Grace (MONARCH) VMC-200, RT, HMC,2415, 25/30XS and 25P
Lathes. Sales and Technical Specification Catalogue. 14 Pages.
D20RX Dean Smith and Grace Lathes. General Sales and Technical
Specification for Models: 13-1, 1609, 1709, 1910, 1910T, 2112, 18-21, 22-25,
26-30, 1609CT, 2112CT, 24CT, 25P, 30TC and Hydraulic Copy Units.32 Pages.
D20Y DEAN, SMITH and GRACE: Hydraulic Copying on Dean Smith and Grace
lathes: a descriptive Instruction Book showing the principles and methods used
in the DSG system. 43 pages.
D20Z DEAN, SMITH and GRACE: Hydraulic Copying on the 17-inch and 21-inch
lathes. A descriptive Instruction Book showing the principles and methods used
in the DSG system. 14 pages.
D21 DEAN, SMITH and GRACE: TC1, TC2, TC3 and TC4 CNC Chucker lathes. Detailed
Sales and Technical Specification and Accessories Catalogue 21 pages.
D21A DEAN, SMITH and GRACE: 500TC CNC lathe. Sales and Technical
Specification and Accessories Catalogue 4 pages.
D38 DECKEL Model FP - the original type. 3-page advertising catalogue from the
1920s.
D39 DECKEL FP1 Universal Precision Miller Early Mk. 1 with changewheels for the
table feeds. Wonderful Sales and Technical Specification catalogue with
cut-away drawings and examples of work in progress. The best catalogue ever
produced for the FP1 - Unfortunately this rare early edition is only an average
quality copy. 74 pages.
D40 DECKEL FP1 Universal Precision Miller early (Mk.2) "lever-change"
model Sales and Technical Specification Catalogue. A superb Catalogue that
matches the quality of the machine. 52 pages.
D40A DECKEL FP1 Universal Precision Miller later (Mk.3) "dial-change"
model Sales and Technical Specification Catalogue. A superb Catalogue that
matches the quality of the machine. 52 pages.
D40B DECKEL FP1, FP2, FP3, FP4, FP3L, FP3LV Universal Precision Millers Mk.4
"square-style" models. Superb and Comprehensive Sales and
Technical Specification Catalogue showing all the accessories and sample jobs
being machined. 62 pages.
D40B2 DECKEL FP 4M and FP1. A very late-model catalogue (possibly the last). 24 well-illustrated pages.
D40BB DECKEL FP2 Catalogue circa 1971 showing the full range of FP2 Machines
and Accessories. 46 pages.
D40Z DECKEL FP3 Catalogue 1974 showing the full range of FP3 Machines and
Accessories. 36 pages.
D40Z2 DECKEL FP3L Detailed and well illustrated Sales, Technical Specification and Accessories Catalogue showing the full range of FP3L Machines and
36 pages.
D40Z3 DECKEL FP4A Miller with CNC Contour 2 Control. Detailed and well illustrated Sales, Technical Specification and Accessories Catalogue. 24 pages.
D40C DECKEL Tools and Accessories. Covers the complete range of extras for a
wide range of Deckel machine tools and includes: the full range of spindle-nose
fittings, spindle-sleeve adaptors, taper adaptors, collets, collet holders,
boring and facing chucks, extension arbors, horizontal cutter arbors,
grinding wheel mounts, scribing tools, indexing heads, chucks, faceplates,
vices, angular tables, clamps and cutting tools of all kinds etc. etc. 46
pages.
D41 DECKEL Die-Sinking and Engraving machines. This is the English
"Alexander-badged" Model. Sales and Technical Specification
Catalogue (Identical to the Deckel Models) Contains useful operating data,
charts and details of accessories and how to mount them - includes two additional
separate Sales and Technical Specification Sheets. 24 pages.£22
D42 DECKEL Universal Machine Tools Manufacturing Program Catalogue (small
format). Covers Engravers, Die Sinking machines, Millers and Optical
Co-ordinate Machines 20 pages.
D43 DECKEL Universal Pantograph Die Sinking Machines Sales and Technical
Specification Catalogue - being a comprehensive and detailed examination of
the machines' construction and operation - and employment of accessories. 50
pages.
D44 DECKEL "Factory Tour" 1968. Illustrated booklet showing the factory
and production methods, English, French and German Text. 30 pages.
D45 DECKEL "Universal Machine Tools" Manufacturing Program"
(Range Catalogue - circa 1960s). Shows the G1U, G1L, G1F, GK12, GK21, KF1 and
KF12 Engravers and Die Sinkers. FP1, FP2, FP2LB, FP3 Milling and Boring
Machines. LKB, LKS Optical Co-ordinate Machines and S1 Tool and Cutter
Grinder. 20 pages.£35
D45A DECKEL "Universal Tool Milling and Boring Machines" - Range
Catalogue 1976. Shows: FP1, FP2, FP3, FP4, FP3L, FP3LV, FP3LG, FP4L, NC Milling
and Boring Machines Models E3, E3L, E3LV, C3, C3L, C3LV, V410, FP5C, V400,
S500. Engraving and Copy Milling Machines Models: G1L, GK12, GK21, GK21A,
KF1, KF1, KF2, KF2S, KF3S. Spark Erosion Machines Models: DE30, DE40. Optical
Coordinate Jig Boring and Grinding Machines Models: LKB and LKS. Universal
Tool and Cutter Grinder Models: S1, SO and SE. 20 pages. Small format.
D45B DECKEL Milling, Engraving and Grinding Machines Tools and Accessories
- Complete Range Catalogue with shadow review of machine-tool range - circa
1972. 52 pages.
D46 DECKEL LK Series (LKB, LKs and LKM) Optical Co-ordinate Jig Boring and
Grinding Machines with lever-operated speed change on the side of the column).
very detailed,informative and well-illustrated Technical Sales and Technical Specification Catalogue. 32 pages.
D46B DECKEL LK Series (LKB, LKs) Optical Co-ordinate Jig Boring and Grinding
Machines with Dial-operated speed change on the side of the column). very detailed,informative and well-illustrated Sales, Technical
Specification and Accessories Catalogue. 32 pages.
D46C DECKEL KF Series KF1, KF2 and KF2S Universal Copy Milling Machines:
highly detailed,informative and well-illustrated Sales, Technical Specification and Accessories Catalogue. 58 pages.
D46C2 DECKEL Late-model KF Series KF2, KF2S and KF3S Universal Copy Milling Machines:
highly detailed,informative and well-illustrated Sales, Technical Specification and Accessories Catalogue. 43 pages.
D46D DECKEL GK Series Universal Pantograph Engraving and Profile (Copy-type)
Milling Machines: Sales and Technical Specification Catalogue. 22 pages.
D46E Deckel Engraving Machines. An early well-illustrated and very detailed
catalogue covering the Models: GO, G1, GiL, GF, G2, GKMO 6-spindle Engraving
Machine, KP tracing and Etching Apparatus, KPM 6-spindle Etching and Tracing
pantograph, , GS cutter Grinder, Stencils, Type face, Accessories including the
Universal Stencil Holder, Jigging Devices, Dividing Head, Circular table,
Devices for Engraving on Curved Surfaces, Circular Cutting Attachment, Cylinder
and Roller Engraving Device, Special Jigging Devices and Special Machinery,
Type Engraving machine, Briquette Die Engraving Machine and samples of work. 32
pages.
D47 DECKEL CNC Universal Milling and Boring Machines FPCC Series. Sales and
Technical Specification Catalogue. 48 pages.
D48 DECKEL SO Tool and Cutter Grinder. Technical Sales and Technical
Specification Catalogue and Basic Operating Instructions. 12 pages.
D48A DECKEL SOE Tool and Cutter Grinder. Sales and Technical Specification
Catalogue 10 pages.
D49B DECKEL SO and SOE Catalogues: both together.£25
D50 DECKEL Type templates Catalogue for Engraving Machines. 16 pages.
DECKEL "MAHO" - see under MAHO
DELTA - see ROCKWELL
DELTA section below
D60 DELAPENA Honing Machines. A collection of Sales and technical Specification
literature (mostly 4 pages per machine) for the following:
"Speedhone" Junior; VHM/1, VHM1D, VHM/3C. VHM60, HHM/11, HHM/30,
Model 276 Beam Stroking Honing Machine; Model 301, VHM/1, VHM/1D, VHM/3, VHM/3C,
VHM/5, VHM/60 and HHM/11. 60 pages.
D60A DELAPENA Mandrels and Stones. Comprehensive Catalogue of truing sleeve,
Adaptors, Wedges and Accessories for use with Delapena machines. 20 pages.
D60B DELAPENA "Manually-operated Industrial Honing Equipment" and
"Heavy-duty Precision Honing Units (two catalogues). Honing Heads, Stones,
Stone Carriers, Stone Supports, Universal Joints, Line Hone, Specials, Cylinder
Gauge, Fluids, etc. 24 pages.
DEMCO Australia - see also SHERATON for lathe listings
D65 DEMCO 24-inch Shaper. Sales and Technical Specification Catalogue. 4
pages.
D70 DEMOOR (Belgium) Lathe Types 824, 825 and 827 Sales and Technical
Specification Catalogue 16 pages.
D80 DENBIGH "Machine Tools" Full-range catalogue of milling machines,
drills, lathes, fly presses, foot-lever presses, couplings, moulding machines,
polishing and grinding spindles, tool grinders. Published circa 1920s. 42
beautifully illustrated pages.
D80A DENBIGH Model "M" (light) Milling Machine: Sales and Technical
Specification Catalogue. 4 pages.
D80AA DENBIGH Milling Machine: 3 Sales and Technical Specification Catalogues
listing the model range. 12 pages.
D80B DENBIGH Model J.P.V.S. Horizontal Milling Machine. Sales and Technical
Specification Catalogue. 4 pages.
D80C DENBIGH Model "D" Milling Machine: Sales and Technical
Specification Catalogue. 4 pages.
D80E DENBIGH Model Flypresses: Sales and Technical Specification Catalogue. 1
pages.
D80F DENBIGH K3 and K2 Series 2 Pillar and Bench Drilling Machines, Sales
and Technical Specification Catalogue. 1 pages.
D80G DENBIGH 1.5" and 2" self-contained Bench-mounted Drilling
Machine. Sales and Technical Specification Catalogue. 2 pages.
D80H DENBIGH 7/8" capacity K.I.A. Series 2 self-contained Pillar Drill.
Sales and Technical Specification Catalogue. 1 pages.
D80J DENBIGH No. 1 Pillar Drill with fine and lever feeds. Sales and
Technical Specification Catalogue. 2 pages.
D80K DENBIGH 20-inch Pillar Drill with fine and lever feeds. Sales and
Technical Specification Catalogue. 2 pages.
D80L DENBIGH Type VSa VARIABLE-SPEED BENCH AND PILLAR DRILLS. Sales and
Technical Specification Catalogue. 2 pages.
D80Y DENBIGH Foot-operated lever press. Sales and Technical Specification
Catalogue. 1 pages.
D80Z DENBIGH "Swiftcut" 2-speed Metal Hacksaw. Sales and Technical
Specification Catalogue. 1 pages.
D100 DENHAM Lathes Full-Range Catalogue circa 1930s and 1940s. 84 pages.
D100A DENHAM 4.5" and 5" Junior Lathe: Sales and Technical
Specification Catalogue 4 pages.
D100B DENHAM Lathes and Slotters: Full-range Catalogue: 8.5" tool-room
lathe, 6.5" lathe, 8.5" gap-bed lathe, 9.5" lathe, 6.5"
slotter, 26 pages.
D100C DENHAM BV28, BV32, BV36, SR8V, SR10V, SR18V and SR20V Post-War Lathes.
Sales and Technical Specification Catalogue. 24 pages.
D100D DENHAM SR10V Sales and Technical Specification Catalogue. 6 pages.
D100E DENHAM Full-range Catalogue dated 1949 showing the company's high-quality lathes and some pictures of the factory and workers.
Models shown include the DF6, DL8, DF8, DR10, DF10, DR12, DF12, DR15, DF15, DR18, DF4, SS6, SS8, SS10, SR12, SS15, SR18, OC14A, OC14B. OC15A AND OC15B. 152 pages.
D105 Deber Milling Machines Sales, Technical Specification and Accessories Catalogue
for the Models FU1, FU2, FU180M, US120, US140, FBF 2000, FBF 2500, FBF3000, Maxim P and STAMP. 24 pages.
D112 DERBYSHIRE (USA) Precision Watch and Clockmaker's Lathes and Micromills:
complete Catalogue early 1940s (red cover). This is the version with 46 extra
inserted plate photographs. 62 pages.
D112A DERBYSHIRE Precision Watch and Clockmaker's Lathes, Micro Drill and
Micromills: Complete Catalogue late 1940s and 1950s products (red cover). 52
pages.
D112B DERBYSHIRE Precision Watch and Clockmaker's Lathes and Micromills:
Complete Catalogue 1956. 80 pages.
D112C DERBYSHIRE Precision Watch and Clockmaker's Lathes, Micro Drill and
Micromills: complete Catalogue 1960s products (green cover). 47 pages.
D112D DERBYSHIRE Precision Watch and Clockmaker's Lathes and Micromills:
complete Catalogue 1970s and 1980s products (green cover). 47 pages.
D112E DERBYSHIRE Lathes Type 750, Model A and Models 460 (flange-mounted motor)
Sales and Technical Specification Catalogue. 20 pages.
D112F DERBYSHIRE - all the above five Catalogues giving a complete picture of
the company's products and enabling identification of rare and unusual accessories.
127 pages.
D116 DEUTSCHLAND DORTMUND MFD (G.M.B.H. Maschinenfabrik Deutschland
Aktiengesellschaft Dortmund) Heavy Lathes. Detailed, interesting and
well-illustrated Sales and Specification Catalogue. Shows the Types D11,
D111, D1V lathes and their various sub-groups, DBD and DP Facing Lathes, DWS
and DWv Roll Turning Lathes and the DRK, DRG, DRL and DRP Wheel Lathes.
Includes a second explanatory catalogue with details of the lathes' design and
construction. English, French and German text. 50 pages.
D120 DeVlieg Spiramatic Jigmils. Two early catalogs circa 1940s showing the models 3B and 5B with detailed
and well-illustrated descriptions of a Jigmil's function, accessories and capabilities.
36 detailed pages.£45
D120A DeVlieg Spiramatic Jigmils. Two catalogs from the early and mid-1950s with highly detailed
and well-illustrated descriptions of a Jigmil's function, accessories and capabilities.
48 detailed pages. Covers the Models 3B, 4B, 3C and 4C. 48 pages.
D120B DeVlieg Jigmils. Accessories Catalog. Rare publications showing the
options and accessories. 14 detailed pages.
D120C DeVlieg Spiramatic Jigmil 2B, 3H, 4H and 5H. Sales and Technical
Specification Catalog with Accessories and details of the Herbert Datatrol
Controls (dated 1959) 38 detailed pages.
D120D DeVlieg Spiramatic Jigmils late 1960s Models 2B-36, 3H-48, 3H-72, 43H-48, 43H-72 and K
Series. Sales and Technical Specification Catalog with Accessories: 18
detailed pages.
D120E DeVlieg Spiramatic Jigmil 2B, 3B and 4B with Micropoint Tool & Cutter Grinder.
Sales and Technical Specification Catalog with Accessories. 24 detailed
pages.
D120F DeVlieg Spiramatic Jigmils. Three catalogs for the Types H, Types J and Types K. Sales and Technical Specification
Catalogues with Accessories. 30 pages.
D120G DeVlieg Spiramatic Jigmils Type R. Sales and Technical Specification
Catalogue dated 1988. 6 pages.
D120H DeVlieg/Okuma Horizontal & Vertical Machining Centres and DeVlieg Vertical Double-column Machining Centres. Technical Specification
Catalogues dated 1984. 12 pages.
D135 DIAMOND Milling Machines USA. Sales and Technical Specification
catalogue (+ Sales and Technical Specification Sheet 22-M), with the B-12,
M-24 and M-20 machines. 5 pages.
D137 DICKSONS Quick Change Tool Posts (also branded Crawford Collets). Detailed Technical Specification Catalogue showing all types, their dimensions,
the many different toolholders, spare parts and a list of lathes to which specific models of toolpost fit - this data including the lathe's swing so that a choice
can be made for lathes of the same or near size not listed. Includes Dicksons 4-way and 2-way toolposts. 22 pages
D140 DIMCO 175, 225 and 225 (Duplicator) lathes. Sales and Technical Specification
Catalogues.
D142 DIXI
Precision Lathe. Sales, Technical Specification and Accessories Catalogue -
French Text. 16 pages.
D142A
DIXI 3S Jig Borer. Two Sales, Technical Specification and Accessories Catalogues
(English text). 12 pages.
D142B
DIXI Model 60 Jig Borer. Two Sales, Technical Specification and Accessories
Catalogues (English, German and French text).24 pages.
D142C
DIXI 75, 75-N, 75-OP. 75-OG, 75-AP, 75-AG, 75-ON, 75-AN Jig Borers. Two Sales and
Technical Specification and Accessories Catalogues(English text).38 pages.
D142E
DIXI 450P Precision Optical Rotary table. Technical Specification and Catalogues
(English text) 4 pages.
D142F
DIXI General Catalogue circa 1976 showing the following models and their variants: Model Dixi 200, Model 300 (Dixi 3S), Dixi 210, Dixi 350, Dixi 400, Dixi 500 (Dixi 5S) with
details of the Controls, Dixi CNC 2200, CNC 440, Automatic Tool Holders, Tool Changers ATC50 85 and 144 and the Pallet Changer. 16 pages.
D142G
DIXI Horizontal Optical Jig Borers Models 3S, 75F, 75M, 5S and the Dixi Vidimatic Control System. 12 pages. .
D142H
Dixi Horizontal Jig Borer Models 400, 410E and 415 High-precision Machining Centre. Detailed and well-illustrated 20-page Sales and Technical Specification Catalogue.
D145 DoALL 15-inch Lathe. Sales and Technical Specification and Accessories Catalogue
(a re-badged Harrison 15-inch): 6 pages.
D145A DoALL 17-inch Lathe. Sales and Technical Specification and Accessories
Catalogue (a re-badged Harrison 15-inch): 6 pages.
D150 Dominion Woodworking Machinery. Full-range Catalogue and Price lists.
Covers the: Radial Arm Crosscutting and Trenching Machine Type F.K.; Combined
Chain and Chisel Mortiser Type D.P.A., B.A.A. and B.M.;Under and Over Pad
Belt Sanding Machine Type D.D.A.; Sawbenches Type EKA, EF, AN, Et and AJ;
Single Ended Tenoning and Scribing Machine Type BX. 40 Pages
D150B Dominion Catalogue collection as issued to agents - beautifully
illustrated. Covers: Wood lathes, Mortising Machines, 24" x 9" Panel Planer and
Thicknessing machine, 14", 24" and 30" Bandsaws, Planer and
Moulding Centre Cutter Grinding Machine Type BY, 6" "Handy"
Surfacing Machine, 12" Surfacing, Jointing and Moulding Machine Type BP
(with thicknessing Attachment), ,12" x 7" Surfacing and
Thicknessing Machine Type ES, 12" x 7" Panel Planer and
Thicknessing Machine Type EV, Cross-cutting and Trenching Machines, 16",
20" and 24" x 9"Surfacing and Thicknessing Machines Type DA,
Open End Belt sanding machine Type DD, Belt Sanding Machines in 9",
12" and 14" sizes, Tennoning Machine Type BX, Tennoning Machine Type
DZ, Saw Benches 16" to 38" Types EK, EF, AN, ET, AV, andAJ,
Dovetailing Machine Type BK, Spindle Moulders Type BC, DV, and "The
Handy", Cutting Gear Sets, Twin Wedgelock Cutterheads and a general Price
List, etc.73 pages.
D150C Dominion Wood Lathes Catalogue Collection covering all models: two
catalogues covering the early and late versions of the Types A.L. and A.L.Y.
Nos. 1, 1a, 2, 2a, 3a (with 6 and 8-inch centre heights), a catalogue for
the 6-inch F.J.A and another for the underdriven 5-inch "Handy". 24 Pages.
D150D Dominion Multi-function Woodworking Machines. Sales and Specification
Catalogue. 9 Pages
D150E Dominion Bandsaws Types DNA, AKA and EN. Sales and Specification Catalogue.
12 Pages
D150F Dominion FK Radial-arm Crosscutting and Trenching Machine, DPA Combined
Chain and Chisel Mortiser, BAA Combined Chain Mortiser with Hollow Chisel
Attachment, DAA 6-inch Under and Over Pad Belt Sanding Machine, Sawbenches
Types EKA, EF, AN, ET and AJ and Single Ended Tenoning 7 Scribing Machine
Type BX. Sales and Specification Catalogue. 42 Pages
D150G Dominion AY UNIVERSAL WOODWORKER (also badged "Elliot"). Sales
and Specification Catalogue. 8 Pages
D151 Donau Schnellradialen Radial-Arm Drills Models DR23, DR30, DR32 and DR50. Detailed Sales, Specification & Accessories Cataloguess. English & German Text.
24 Pages.
D152 DORMAC Millers Size 1 and 2. Sales, Specification & Accessories Catalogues. 10 pages
D155 DORMER Machine Tools. Full-range Catalogue giving details of the Model 108 Drill Sharpener, Model 100 Semi-Automatic Drill Sharpener,
Model 48 Drill Point Thinning Machine, Model 94 Goniometer Drill Inspection Unit, Model 53 Profile Tool & Cutter Grinder.
Text in English, French, German, Italian & Spanish. 12 pages.
D155A DORMER S.P.V. Slimline Tap Drivers Catalogue. Full specifcations of the GS-8, GS-12, GS-24, GSK-8, GSK-12 & GSK-24. 8 pages
D160 DOUGLAS 10.5-inch SHAPER (Australia). Sales and Technical Specification
Sheet. 2 pages.
D170 DOWDING (DOWDING and DOLL) V4 Universal Gear Hobber: Sales and
Technical Specification Catalogue. 10 pages.
D170A DOWDING (DOWDING and DOLL) Accuratool Capstan Lathes. Comprehensive and
well-illustrated Sales and Technical Specification Catalogue (not a
manual)for the lighter 5/8" and 13/16" versions. 8 pages.
Many other Dowding and Doll Catalogues are available. Please enquire.
D176 DOWLING Machine Tools. A useful Catalogue collection comprising: Model 242
Pantograph Engraver, Model 303 Bench Panel Pantograph Engraver, Model 713
Pantograph Engraving Machine, Model 848 Pantograph Engraving Machine, Engraving
Cutter Grinder Model 595, Bench Type Swivelling Head Tool and Cutter Grinder,
Models 858A and 595 Engraving Cutter Grinders, Model 858 Engraving Cutter
Grinder, Universal Tool and Cutter Grinder, Model C Tapping Machine, Type
faces Illustrations. 21 pages
D180 DOWNHAM Precision Jig Borer and Drilling and Milling Machine Sales and
Technical Specification Catalogue. (A copy of the American "Linley"
machine.) Sales and Technical Specification Catalogue. 4 pages.
D200 DRILLSPRINT 500: Operators Manual and Parts as Exploded Component
Drawings.
D210 DROOP and REIN. Magnificent 102-page full-range Milling Machine
Catalogue from the 1970s showing aspects of the factory, operating methods of
the millers, numerous machining examples and typical installations in various
factories. Includes an interesting priced example for a Model FS.130-NB with
Plessey CNC Control.
D210A DROOP and REIN Copy Milling machines. Detailed and well-illustrated
Whole-range Sales and Specification Catalogue from the 1960s. 102 pages.
MD550G DRUMMOND Lathes: No Proper Manual was ever published for the early
belt-drive Drummond lathes, but there is an interesting collection of Sales
and Specification material below - including screwcutting charts and
instructions for adjusting the headstock bearings on the Model M - that can be bought
as a single package at a substantial discount. See D224X below
D244D Round Bed Drummond. No manual was ever issued but the following complete Data Pack is
available:
Drummond 4" Type A Round-Bed Lathe: Sales Booklet. 12 pages.
Drummond: Special Attachments and Accessories for Type A Round-Bed Lathes. 12
pages.
Drummond: "Lathe Work". An interesting Works Booklet showing examples
of Models and other projects by amateurs demonstrating the versatility and
capacity of the Flat and Round-bed lathes.
Also included are both pre and post-1925 screwcutting and feed charts. 24 pages
D244 DRUMMOND small early lathes a complete data pack consisting of: Very early lathes Full-range Catalogue 45 pages. Hints to Purchases of Lathes (1920 - text only) 19 pages.
American sales and accessories catalogue showing the flat-bed lathe with the overhead bracing bar between the two headstock bearings and other models 10 pages.
Special Attachments and Accessories for Type A Round-Bed Lathes 12 pages. Drummond 4" Type A ROUND-BED: Sales and Specification Booklet 12 pages. Drummond
"Lathe Work". An interesting Works Booklet showing examples of Models and other projects by amateurs
demonstrating the versatility and capacity of the Flat and Round-bed lathes 24 pages.
D244A Drummond: Very early Catalogue for 3.5" Model B flat-bed lathe. 8
pages.
D244C Drummond Very early lathes: Full-range Catalogue. 45 pages.
D244CA Drummond 1921 3.5-inch Model A. Sales and Specification Catalogue. 12
pages plus 2-page letter from the makers.
D244E Drummond: Special Attachments and Accessories for Type A Round-Bed
Lathes. 12 pages.
D244F Drummond M Type Lathe (31/2" flat bed): Sales and Specification
Booklet (1930 - 1942 Model). Contains details of the essential headstock
bearing adjustment technique. 12 pages.
D244G Drummond/Myford M Type lathe: The "transition" booklet when
Myford took over manufacture in 1942. 12 pages.
D244H Drummond M Type Lathe: Special Attachments and Accessories Catalogue.
16 pages.
D244J Drummond: "Lathe Work". An interesting Works Booklet showing
examples of Models and other projects by amateurs demonstrating the versatility
and capacity of the Flat and Round-bed lathes. 24 pages.
D244K American Drummond Catalogue showing flat and round-bed models and
accessories. 1912-1921 Models. 10 pages.
D244X All the Drummond literature above (concerning the smaller lathes) 196
pages. .
D244B Drummond Mk,1 Model A (flat bed model with leadscrew down centre of bed)
useful set of 30 dimensioned drawings showing most parts.
D244K Drummond "J" Type Hand Bench Shaper: Sales and Technical
Specification Catalogue. 4 pages plus covers.
D244L Drummond "L" Type Hand Drill: Sales and Technical
Specification Catalogue. 4 pages.
D244M Drummond T Type 5-inch, 6-inch and 7-inch Lathes Sales and Technical
Specification Catalogue: Sales and Technical Specification Catalogue. 12
pages.
D244N Drummond T Type 5-inch, 6-inch and 7-inch lathes Special Attachments
and Accessories. 16 pages.
D244P Drummond: Lists of Changewheels and Screwcutting Charts for models
"A" Round Bed and "B" 3.5" Flat Bed. free with any of
the above.
D244PG Drummond "Little Goliath" Sales Catalogue. Showls the lathe with its foot-motor
drive system and all the various accessoies. 4 pages.
D244R Drummond: The complete set of all Vintage Drummond literature: on CD or as a
high-quality bound print .
D245 DRUMMOND (Drummond-Asquith) Maximinor Automatic Multi-Tool Lathe. Detailed Sales and Technical Specification Catalogue. 20 pages.
D245A DRUMMOND (Drummond-Asquith) Maxirapid High-speed, Multi-Tool Lathe. Sales and Technical Specification Catalogue 8 pages.
D245B DRUMMOND (Drummond-Asquith) Maxipilot Hydraulic Copying Lathe. Abridged Operational Instructions, Description of Hydraulic Mechanism & Control and
a copy of the Maker's Sales & Technical Specification Catalogue. This not a full manual.
D245C DRUMMOND (Drummond-Asquith) Turn & Bore Lathe Type 12. Abridged basic Operational Instructions, Description of Hydraulic Mechanism & Control and
a copy of the Maker's Sales & Technical Specification Catalogue. This is not a full manual.
D245D DRUMMOND (Drummond-Asquith) Maximajor Automatic Multi-tool Lathe. Maker's Sales and Technical Specification Catalogue 4 pages.
D245E DRUMMOND (Drummond-Asquith) Hoblique Gear Hobbing Machine. Maker's Sales and Technical Specification Catalogue 4 pages.
D245F DRUMMOND (Drummond-Asquith) Maxicut ELECTRONIC Copying Lathe. Maker's Sales and Technical Specification Catalogue 16 pages.
D245G DRUMMOND (Drummond-Asquith) Skimax Multi-tool Production Hand Lathe. Maker's Sales and Technical Specification Catalogue 4 pages.
DSG Lathes - See Dean Smith and Grace
D260 DUBIED 514 Hydraulic Copying Lathe (Switzerland). two separate catalogues:
1) Sales and Technical Specification and 2) Accessories (the latter covering
the Models 514 and 515). 36 pages.
D267 DUFF (USA) Ram Turret Vertical Milling Machine Sales and Technical
Specification Sheets showing standard and variable-speed drive models. 4 pages.
D290 DUFOUR (Gaston Dufour) 51 Milling Machine. Sales and Technical
Specification Catalogue. 12 pages.
D290A DUFOUR (Gaston Dufour) 53 Milling Machine. Sales and Technical
Specification Catalogue. 6 pages.
D290B DUFOUR (Gaston Dufour) 59 Milling Machine. Sales and Technical Specification Catalogue. 6 pages.
D290C DUFOUR (Gaston Dufour) 61 Milling Machine. Sales and Technical Specification Catalogue. 6 pages.
D290D DUFOUR (Gaston Dufour) 62 Milling Machine. Sales and Technical Specification Catalogue. 6 pages.
D290E DUFOUR (Gaston Dufour) 101, 130 and 160 Milling Machines. Sales and Technical Specification Catalogue. 8 pages.
D290F DUFOUR (Gaston Dufour) F-164 Milling Machine. Sales and Technical Specification Catalogue. 6 pages.
D290G DUFOUR (Gaston Dufour) F-195 Milling Machine. Sales and Technical Specification Catalogue. 6 pages.
D290H DUFOUR (Gaston Dufour) 221N and 221R Milling Machines. Sales and
Technical Specification Catalogue. 12 pages.
D290J DUFOUR (Gaston Dufour) 223 and 230 Milling Machines. Sales and
Technical Specification Catalogue. 10 pages.
D290K DUFOUR (Gaston Dufour) 225, 231 and 250 Milling Machines. Sales and
Technical Specification Catalogue. 14 pages.
D290M DUFOUR (Gaston Dufour) 302 Milling Machine. Sales and Technical
Specification Catalogue. 10 pages.
D290N DUFOUR (Gaston Dufour) 624D and 624C Precision Milling Machines. Two Sales
and Technical Specification Catalogues. 18 pages.
D290P DUFOUR (Gaston Dufour) CS2531 Milling Machine, Programme type. Sales
and Technical Specification Catalogue. 16 pages.
D290Q DUFOUR (Gaston Dufour) CS2533 Milling Machine, Programme type. Sales
and Technical Specification Catalogue. 12 pages.
C/D600 DUNLAP/CRAFTSMAN/COMPANION (USA): compilation of all 86 pages from the
Craftsman Catalogues, which show metal and wood lathes. Covers: 1929, 1930,
1932, 1933, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942 and 1943 - when the
Catalogue was withdrawn.. 86 pages on CD-ROM only.
C/D601 DUNLAP/CRAFTSMAN/COMPANION post World War 2 Lathes, Millers and
Shapers: compilation of every page showing these machines. Includes the first
post war Catalogue of 1948, then 1949, 1950, 1952, 1953, 1954, 1955, 1957 and
1960/61 on CD-ROM only
D625 DUOMO Turret Milling Machines Models VM/10, VM/20, VM/30, JS-2S, JS-2VS, JS-2V, JS-3VS, JS-4VH, VM/20G, VM/30G and VM20AG. Sales and Technical Specification Catalogue. 18 pages.
D650 DUPLOMATIC FC1 Conventional and Die-sinking Ram-head Milling Machine. Sales and Technical Spocification Catalogue. 6 pages.
D700 DYNAFILE 55-L (Seco Engineering) Operating and Repair Instructions.
E20 EAGLE SURFACE GRINDERS: Sales and Technical Specification Catalogue for
the early and late Standard and Heavy Duty Models 1, 2, 2a, 3, 3A, 4, 4A, 5, 6;
the Model 534 in Mk.1 and Mk.2 versions and a price list. This collection
represents the complete data set for these machines. 13 pages.
E30 ECHEA Lathes. Catalogue Collection including two for the B700, B800, BR900, BR1000, BR1100, D500, D600 and D700 and
the maker's Manufacturing Program Catalogue listing the Types RA310, RA360, C400, C460, D500, D600, D700, B700, B800, BR900, BR1000, BRN1000, BRN1100 and BRN1200.
18 pages.
E60 EDELSTALL: for Emco models, see the Emco section below
E65 EDGAR (Holbrook) lathes. Well-illustrated Sales and Specifications
Catalogues Two editions covering both the small and larger versions of the
lathe and complete with screwcutting charts. 23 pages.
E70 EDGWICK 6.5-inch Lathe Mk.2. Sales and Technical Specification Catalogue.
12 pages.
E70A EDGWICK No.2 Horizontal Milling Machine Universal and Plain Models. Three detailed Sales and
Technical Specification Catalogues covering early to late types. Some duplication but this is the totality of liteure on these machines. 23 pages.
12 pages.
E70B EDGWICK Universal Gear & Spline Cutting Machine. Sales and Technical Specification Catalogue. 4 pages.
12 pages.
E80 Eguro Precision Lathes and Milling Machines: Sales and Technical Specification for
the Lathes models EL-2, EL-3, PH6L-3 and Milling Machines Models TF-5 and TF-6. 16 pages
E90
ELB Surface Grinders. Full-range Catalogue 1958. 40 pages.
E90A
ELB Surface Grinders. Detailed full-range Sales, Technical and Accessories Catalogue for the 1960s.
This large publication is packed with useful data. Covers the models VA1, VA11, Fo-ME, the SW Range,
SWB Range, SW Range, SWD Range and all the many Accessories. Includes sections on grinding techniques, set-ups and examples of jobs.
E90B
ELB Surface Grinders. A very useful full-range Sales & Technical Specification Catalogue for the 1970s. Well illustrated
and with detailed information. Covers all the grinders grinders in the ranges SW, SW0, SWB, SWB0, SWBD and SWBD0. 48 pages.
E90C ELB Surface Grinders Catalogue Compendium covering all models from the 1950s to the 1980s including the series and models
VA1, VA11, Fo-ME, SW Range, SWB Range, SWD Range, SW0, SWB0, SWBD and SWBD0. 160 pages.
E95
ELGIN Machine Tools circa 1920 and 1930. Beautiful full-range Catalogue
showing the range of precision bench lathes together with all their accessories
and countershafts, a bench grinding machine, grinding head, and tapping
and drilling machines. Includes full screwcutting charts for the threading
attachment.76 pages.
E95A ELGIN Machine Tools circa 1940s and 1950s. A collection of literature
comprising: Horizontal Bench Miller Catalogue (4 pages), a 4-page folder
showing the Elgin Lens Polishing Machines, Precision Bench Lathes types CB-5C,
4EV, lathes on pressed steel pedestals, pressed steel base with laminated top
and steel frame benches with laminated wood tops, and Horizontal and vertical
milling machines. Vertical Bench Miller Sales and Technical Specification
Sheets, Lathes and Millers Catalogue (4 pages) plus price lists. 20 pages in
total.
E95B All the above Elgin literature:
ELLIOTT - we have a vast collection of Elliott Sales and Technical
Specification Literature in addition to those listed below: Please e-mail your
requirements :tony@lathes.co.uk
E103 ELLIOTT Full-range General Catalogue. Lathes, Millers, Shapers, Grinders,
Drills, Bandsaws, Hacksaws, Punch and Shearing Machines, etc. (1960s) 39
pages.
E104 ELLIOTT lathe: "CARDIFF" Major Lathe Beautifully illustrated
Catalogue showing speed change lever positions and full English and Metric
Screwcutting charts. 15 pages.
E104A Elliott Lathe: Cardiff 7.5" and 8" Lathe Sales and
Technical Specification Catalogue 2 pages.
E104B Elliott Lathe: Prefect, Crusader and Senior 17", 18" and
22" swing Lathes (larger examples of the "Cardiff" design) 4
pages.
E104C Elliott Lathes 9.25" and 11" (18.5-inch and 22-inch swing):
Sales and Technical Specification Catalogue with useful screwcutting gearbox
chart (often damaged on these lathes). 12-pages.
E104D All the above Elliot Lathe Catalogues -
E104D Elliott Lathe: OMNISPEED. Catalogue. 12 pages.
E4E Elliott Lathe: OMNITURN PRODUCTION. Catalogue. 8 pages.
E104F Elliott Lathe: OMNITOOL PRECISION. Catalogue. 8 pages.
E4G Elliott Lathe Model 1L. Catalogue. 4 pages.
E104H Elliott Lathe CONCORD 460. Sales and Technical Specification Catalogue.
4 pages.
E106 Elliott General Purpose Toolroom and Production Machines. (Catalogue x
2) 5 pages.
E108 ELLIOTT Shaper 10M (Alba): Sales and Technical Specification sheet 4
pages.
E108A ELLIOTT Shaper 14M, 18M, 24M (Alba): Sales and Technical Specification
Catalogue 4 pages.
E108B ELLIOTT Shaper (ALBA) Model: Sales and Technical Specification sheet 2
pages.
E108C ELLIOTT Shaper (ALBA) Model: Sales and Technical Specification sheet 2
pages.
E108D ELLIOTT Shaper (ALBA) Models (S Series) S14, 18S and 24S: Sales and
Technical Specification Catalogue. 4 pages.
E108E ELLIOTT Shaper (ALBA) Models MR. Sales and Technical Specification
Catalogue 4 pages.
E108F ELLIOTT Shaper (ALBA) "Major" Series 18", 24"
30". Sales and Technical Specification Catalogue 4 pages.
E108K ELLIOTT Planer HYDETSCO 100, 150, 300 and 400 series. Technical Sales
and Technical Specification Catalogue 16 pages.
E110 Elliott JIG BORER Co-ordinate drilling and Milling Machine. Technical
Sales and Technical Specification Catalogue. 4 pages. E111 Elliott Miller
00 Omnimill and 181 Turret: Sales and Technical Specification Catalogue. 8
pages.
E111A Elliott Millers 01 and 02 Omnimill Turret: Sales and Technical
Specification Catalogue 4 pages.
E11B Elliott Miller "Rapidmill Series" Plain, Universal and
vertical. Sales and Technical Specification Catalogue. 12 pages.
E111C Elliott Miller "Rapidmill No. 2" Sales and Technical
Specification Catalogue.2 pages.
E111D Elliott Miller 70 Series: Sales and Technical Specification Catalogue
1963. 35 pages.
E111E Elliott Miller MILMOR Turret: Sales and Technical Specification
Catalogue 22 pages.
E111F Elliott Miller Universal Model "UO". Sales and Technical
Specification Catalogue 4 pages.
E111G Elliott Millers Models P1, U1, V1, P2, U2 and V2 Universal Plain and
Vertical: Sales and Technical Specification Catalogue. 8 pages.
E111H Elliott Millers STURDIMILL 1100 and 1500: Sales and Technical
Specification Catalogue. 18 pages.
E111J Elliott Millers STURDIMILL 1250 and 1500: Sales and Technical Specification
Catalogue. 6 pages.
E111K Elliott Millers STURDIMILL 1100 and 1100R: Sales and Technical
Specification Catalogue. 2 pages.
E111L Elliott Miller STURDIMILL OMNIMILL: Sales and Technical Specification
Catalogue. 4 pages.
E111M Elliott Miller Model M1 Horizontal and vertical: Sales and Technical
Specification Catalogue. 16 pages.
E111Z Elliott Miller TR1, TV1 and TV2 Hydraulic Copy Millers. Sales and
Technical Specification Sheet. 2 pages.
E111N Elliott Milling Accessories 7 pages.
E111P Elliott Milling RACK DIVIDING ATTACHMENT. Technical; Sales and
Technical Specification Sheet. 2 pages.
E112 Elliott 2G and 2GS 10-speed Drills (also branded Progress) . Sales and
Technical Specification Catalogue with cut-away section of the head gearing. 3
pages.
E112A Elliott 3E, 4E and 5E Drills (also branded Progress): Sales and
Technical Specification Catalogue. 8 pages.
E112B Elliott 3A Drill (also branded Progress): Sales and Technical
Specification Catalogue. 4 pages.
E112C Elliott DC3 and DC4 Radial-arm Drills (also branded Progress): Sales
and Technical Specification Catalogue. 4 pages.
E112C Elliott 1 and 1S Drills (also branded Progress) Models: Sales and
Technical Specification Catalogue. 4 pages.
E112D Elliott 16 and 16S Drills (also branded Progress) Models. Sales and
Technical Specification Catalogue. 4 pages.
E113 Elliott Surface Grinder Model "ELLIOTT / BURDETT 24" x 8":
Sales and Technical Specification Catalogue. 4 pages.
E113A Elliott Surface Grinder Model 20 x 8. Sales and Technical Specification
Catalogue. 8 pages.
E113B Elliott Surface Grinder Model 921: Sales and Technical Specification
Catalogue. 16 pages.
E113C Elliott Surface Grinder 1018 precision Toolroom: Sales and Technical
Specification catalog 2 pages.
E113C Elliott Surface Grinder 925: Sales and Technical Specification
Catalogue 2 pages.
E113C Elliott Surface Grinder 616 and 1018: Sales and Technical
Specification Catalogue 16 pages.
E113D Elliott Tool and Cutter Grinder Model 5: Sales and Technical
Specification Catalogue. 12 pages.
E230 Emco Unimat - first known (and almost certainly the first ever) English
Language catalogue dated 1954. 6 pages showing the first crackle-black models
and their accessories.
E230A EMCO DB200 /Unimat SL1000 USA Sales and
Technical Specification Catalogue (early) with detailed technical
specifications and illustrations of accessories. 4 pages.
E230B EMCO DB200 /Unimat SL1000 USA Catalogue with detailed technical
specifications and illustrations of accessories. 15 pages.
E230C EMCO DB200 /Unimat SL1000 USA Accessories Catalogue (repeat information)
6 pages.
E230D EMCO UNIMAT SL1000/DB200 British Sales and Technical Specification
Catalogue with detailed technical specifications and illustrations of
accessories. 6 pages.
E230E EMCO SL1000/DB200 early British Market Handbook 28 pages.
E230F EMCO UNIMAT SL1000 British market HANDBOOK and Parts' LIST. Later
version, A4 size, with 48 well-illustrated pages covering the lathe and its
accessories in great detail. Full explanatory texts with clear diagrams of how
to get the best from the lathe and its attachments. Exploded Parts' diagrams of
the lathe and every accessory. 48 pages.
E230G EMCO DB200 /UNIMAT American market HANDBOOK (46 pages) copiously
illustrated. Describes in detail how to use the lathe and its accessories. 46
pages.
E230H Emco SL1000 and DB200 DATA PACK. Above the above EMCO SL1000/DB200 items.
These give the complete range of information about the lathes.
E238 Emco Unimat PC Sales and Technical Specification Catalogue with detailed
technical specifications and illustrations of accessories. 12 pages.
E240 EMCO Unimat 3 Catalogue with detailed technical specifications and
illustrations of accessories. 10 pages.
E242 EMCO Compact 5 Catalogue with detailed technical specifications and
illustrations of accessories. 10 pages.
E244 EMCO Compact 8 Sales and Technical Specification Catalogue with detailed
technical specifications and illustrations of accessories. 5 pages.
E245 EMCO Maximat 8V Lathe and Milling Head and Accessories Sales and
Technical Specification Catalogue 6 pages.
E246 EMCO "Emcomat" 8.4 and 8.6 Sales and Technical Specification
Catalogue with detailed technical specifications and illustrations of
accessories. 6 pages.
E246A EMCO "MAXIMAT" V8 (lathe and miller combination marketed by
Edelstal) Sales and Technical Specification Catalogue with detailed technical
specifications and illustrations of accessories. 6 pages.
E247 EMCO Compact 10 Catalogue with detailed technical specifications and
illustrations of accessories. 14 pages.
E248B EMCO Maximat V10P Sales and Technical Specification Catalogue (with
milling head) comprehensive technical and accessories Catalogue 16 pages.
E250 EMCO "Maximat" Universal Machine Tool Series 2000 (lathe and
miller combined), 1958. A very early and rare Emco Sales and Technical
Specification Catalogue with detailed technical specifications and
illustrations of accessories.. 6 pages.
E252 EMCO "Maximat" Universal Machine Tool Series 3000, 1962. The
next stage in Maximat development - a larger and more robust machine. Sales
and Technical Specification Catalogue with detailed technical specifications
and illustrations of accessories.. 8 pages.
E254 EMCO Maximat SUPER 11 (with milling head) with detailed technical
specifications and illustrations of accessories. 20 pages.
E256 EMCO Maximat V13 Sales and Technical Specification Catalogue with
detailed technical specifications and illustrations of accessories. 8 pages.
E258 EMCO Maximat V13 Catalogue (with milling head) with detailed technical
specifications and illustrations of accessories. 18 pages.
E262 EMCO DB-5 wood Lathe Sales and Technical Specification Catalogue with
detailed technical specifications and illustrations of accessories. 6 pages.
E262A EMCO EMCOSTAR Universal Woodworking Machines. Detailed and useful Sales and Technical
Specification Catalogue. 12 pages.
E262A2 EMCO EMCO-REX Surfacig and Planing Machine. Detailed catalogue showing the mounting and use of extras that include circular saw,
slot mortising and moulding attachments 12 pages.
E264 EMCO "Emcoturn"120/120P CNC slant bed Catalogue with detailed
technical specifications and illustrations of accessories. 17 pages.
E266 EMCO General CNC Catalogue 100/120/140/220/240/320/340/360/Compact 5
CNC/F1-CNC mill CNC Training system/etc. with detailed technical specifications
and illustrations of accessories. 21 pages.
E268 EMCO FB-2 Miller Sales and Technical Specification Catalogue with
detailed technical specifications and illustrations of accessories. 6 pages.
M49 EME (E.M.E.) MENTOR Vertical Milling Machines (4-speed Emco millers, as
marketed by the Elliott Group under the E.M.E. brand name and two Taiwanese
machines also re-badged)). Sales and Price-list Sheet. 6 pages.
E270 EMPIRE Lathe 6-inch (by B. Elliott). Sales and Technical Specification
Catalogue. 4 pages (Mk.1 and Mk.2 versions)
E276 EMWEE Type PR8 Turret Lathe made by L.P.Grothauzen in the Netherlands. Sales and Technical Specification
Catalogue. 4 pages + 4 pages of UK distributor's information.
E278 ENCO 4-way and 12-position Quick-change toolpost, self-indexing toolpost, 4-way toolpost to mount on the cross slide and replace the lathe top slide, cross-slide hexagon turrets. tailstock turrets,
bed-mounted hexagon turrets, rotating centers, magnetic bases, etc. Very detailed, well-illustrated catalog with listing of all sizes,
dimension charts and fittings, cut-though drawings, etc. Dated 1966. 24 pages.
E280 ENERGY VM-25 vertical Miller (Arboga copy). Sales and Technical
Specification Catalogue. 4 pages.
E290 ENSHU Vertical Milling Machines 1950s - 1960s (Japanese). Sales & Specification Catalogue. 4 pages
E300 ENSIGN (Elliott of England) 13-inch "slant-bed Lathe" Sales
and Technical Specification Catalogue with detailed technical specifications
and illustrations of accessories. 6 pages.
E308 ERIE Steam Drop Hammers. Detailed and well-illustrated Sales and Technical Catalogue. 20 pages.
E305 ERIKSEN Lathes (Alfred Erikson, Hamburg, Germany): Catalogue set for the Palermo,
Kreta and Emato Models of the 1950/60s Models: 180NE, 200N, 200NE, 180DN, 200DN, 220EF, 250EF,
300EF, 350EF, 220EFE, 250EFE, 300EFE, 350EFE and 50/200Rv. 26 pages
E310 ERIKSSON of Sweden. High-speed Toolroom Lathe Type S, "Tormatic"
Copying Lathe and Type S Capstan Versions. Sales and Technical
Specification Catalogue 9 pages.
ESCO - See also Hahn and Kolb
E320 ESCO Escomatic D2 and D4 Coil-fed Automatic lathe. Sales and Technical
Specification Catalogue. 14 pages.
E320A ESCO Escomatic D6 and D6R Automatic lathes. Sales and Technical
Specification Catalogue. 8 pages.
E330 ESEWAY Hardness Testers. Complete and detailed Full-range Sales and Technical Specification Catalogue showing the machines for testing methods including, Rockwell, Rockwell Superfical, Brinell and Vickers with details of how the test methods are
conducted, technical data for the testing methods and and shwowing Models including; AS, LAS, ASW, LASW, AR, LAR, ARW, LARW, ARBW, ALRBW, S, LS, SW, LSW, R2, LR, RW, LRW,RBW, LRBW,
ER, ELR, ERW, ELRW, ES, ELS, ESW, ELSW, ERBW, ELRBW, APR-3, SPLV-2 Vickers, SPVS-2 Semi-Automatic Vickers/Rockwell Superfical, SPV-2 Semi-Automatic Vickers, SPVR-2 Vickers/Standard Rockwell, SPVRB-2 Semi Automatic Vickers/Standard Rockwell Method Brinell Tester, V10 and V30 Single load Vickers,
V5-10-30 Semi-Automatic Vickers, 09B Brinell, FLV-10, FVL-30, DIGITAL Testers Models DR, DLR, DRW, DLRW, DS, DLS, DSW, DLSW, DGLRW,
Dynamic Hardness Tester, Portable Dynamic Hardness Testers and the Micro-Hardness Tester MV-3. 80 pages.
E335 Essbeco RD 25/A Radial Drilling Machine. Sales & Specification Sheet. 2 pages.
E340 Essex No.18 Bandsaw. Detailed Sales & Technical Specification Catalogue for this toolroom-class Bandsaw. 4 pages
E340A Essex No.32 Punch Shaper. A highly detailed and well illustratedSales & Technical Specification Catalogue that is almost an operation handbook. 16 pages
E340B Essex Tapping Machines Models 22, 23, 26 and 124. Sales & Technical Specification Catalogue. 6 pages.
E420 ETA "Economic" Sales and Technical Specification Catalogue
with detailed technical specifications and illustrations of accessories. 4
pages.
E421 ETSCO and HYDETSCO Shaping Machines Models 2A, 2AU, 4A, 4AU and 4H (2 editions of the latter) and the Model 6H Hydraulic Plano Shaper. Sales and Technical Specification Catalogues. 18 Pages.
E422 EW Lathe. Collection of Sales and Technical Specification Catalogue
pages. 8 pages.
E438 EWAG WS11 Grinding Machine for Fine Carbide Tools and Electrodes. 12 pages.
E850 EXACTA Capstan Lathe. Sales and Technical Specification Catalogue pages.
4 pages.
E900 EXCEL (Victoria) Miniature Jig Borer Model "0" (identical to the BCA Mk.2)
Sales and Technical Specification Sheet. 2 pages.
E900A EXCEL (Victoria) Lathe Precision Plain Turning Model L3N: Sales and Technical
Specification Catalogue. 4 pages.
E900B EXCEL (Victoria) Filing and Sawing Machines Nos. "0", "0S",
"2", "3", "3S" and 4 : Sales and Technical
Specification Catalogues - the full data pack for these machines. 26 pages.
E900C Excel (Victoria) Grinders - a catalogue set showing the: No.0 Precision Semi-Universal(cylindrical and other); Model No.1 Vertical Spindle Surface;
Model No.2 Surface; Model No.3/12 Hydraulic Surface; Model 3A Hydraulic Surface; Model 3C Hydraulic Surface; Model No.5 Tool & Cutter. 16 pages
E950 EXE Lathes and Surface Grinder. A data pack for the maker consisting of
two catalogues for the 3.5" and 2.5" lathes and one for the Grinder -
all with detailed technical specifications and illustrations of accessories. 12
pages.
F8 FAIRCUT Lathes. Sales sheet for the "Junior"
lathe - 2 copies, with some differences. 2 pages
F9 "Famhexport" TG-600-M, TG-700-M-A-65 and TG-800-M Lathes. Sales Sheet. 2 pages.
F10 FAM (FAM-TITO) TV180 lathe. Sales and specification sheet. 2 pages.
F15 FAMOT TUM-25B/35 Precision lathe (Polish - Polmach): Sales and Technical
Specification Catalogue. 6 pages.
F17 FAMUP RAG 40 Milling and Drilling Machine with Multi-angle (Tilt front to back and rotate on vertical and horizontal axes) Table.
Sales, Accessories and Technical Specification Catalogue. English, French, German and Italian text. 6 pages
F20 FAVORITE General Watchmaker's Tool Catalogue. A superb publication that
lists and illustrates every conceivable tool and accessory for the watchmaking
trade. 325 pages.
F20A Favorite Lathes: Lathes No. 2 and No 3 Sales & Specification Catalogues. A collection of literature including the associated pages from
the Favorite Full-range Catalogue showing the No. 3 and No. 2 lathe and all their accessories.
The lathe catalogue in is English. French and German and the main catalogue in English. 52 pages
plus another 20 pages of illustrations taken from the catalogues and enlarged.£42
F20B Favorite Lathes: Catalogue No.3 and 1B. 20 pages.
F20C Favorite Lathe No.3. Early Catalogue; not a perfect reproduction. 12
pages.
F25 FAY and SCOTT (USA) Lathes. Well-illustrated Catalogue of pattern makers
lathes and accessories. 1905 32 pages.
F25A FAY and SCOTT Extension Gap Bed Lathes. Well-illustrated Catalogue 1906
24 pages.
F27 Feeler Toolroom lathe FTL-618 and Chucking (Capstan) lathe Type FHR-68. Two Catalogues. 18 pages.
F28 FEHLMANN PRECISION COORDINATE MILLING AND DRILLING MACHINES P10, P18S,
Picomax 50, Picomax 50-CNC, Picomax 100XL-CNC and Picomax 100-CNC. Sales
and Technical Specification Catalogue. 8 pages.
F30 FEINPRUF Tricurat 60 Hand-operated Surface Grinder. Sales, Technical
Specification and Accessories Catalogue. 8 pages.
F30A FEINPRUF SH300 High-speed Relieving Lathe. Sales, Technical Specification
and Accessories Catalogue. 8 pages.
F36 FELL Wood-turning lathes Types M.F., M.F.B., M.F.F., C.B Sanding and Polishing Lathe, G.R. Small Boring lathe and the
Type L.J. Semi-automatic Pattress Turning Machine and the Type G.S.B. Automatic Variety Turning Machine.
All the lathes made by Fell extracted from a larger all-models Catalogue. 12 pages.
F36A FELL Wood Working Machinery. Complete and detailed Full-range Catalogue Circa 1948. 169 pages.
F37 Fellows Gear Company: 50-Year Anniversary Booklet - a detailed account of the Company's
founding, development and the machines it produced from 1896 until 1946. 50 pages.
F37A Fellows Gear Company. All-models Catalog with details of Gear Cutters, Inspection Instruments,
Special Attachments and Cutting and Shaving Tools. Models include: 3-inch Fine-pitch Gear Shaper, No. 4GS Gear Shaper, 7-type Gear Shaper- No 7125, 7A-type Gear shaper – No 7125A, 7-type Side-Trimming gear shaper, 7A-type Side-Trimming Gear Shaper, 7- & 7A-type Automatic Indexing Gear Shapers, Horizontal Z-model Gear Shaper, No.12 Gear Shaper, No.10 Rotary Gear Shaper. 6A-type Gear Shaper, 6A3-type Gear Shaper, 36-type Gear Shaper, 100-Inch & 120-Inch Gear Shapers, No.12GH2 Heliglide Gear Hobbing Machine, No.3-60 Rack Shaper, No.4T Thread Generator, No.6T Hourglass Thread Generator, No. 4 Fine-Pitch Gear Shaving Machine, No.8 “Full-Tool” Gear Shaving Machine, No.8 Internal Gear Shaving Machine, No.12 Gear Shaving Machine, No.18 Gear Shaving Machine, No.24 Gear Shaving Machine, LS-type Gear Lapping Machines, No.4B Gear Burnishing Machine, No.65 Helical Cutter Sharpening Machine, No.8M Red Liner, No. 20M Red Liner, No.4 Fine Pitch Red Liner, No.12M Involute Measuring Instrument, No.24M Measuring Instrument, No. 12H Lead Measuring Instrument, No. 24H Lead Measuring Instrument, Nos. 12C &12CT Inspection Instruments, Nos. 12R, 12CR, & 12CTR Inspection Instruments, Reversing Attachment, Rack Cutting Attachment, Face Gear Cutting Attachment, Automatic Magazine Attachment, Work Elevating Attachment, Deburring Attachment, Honing Attachment, Gear Shaving Machine Chamfering Attachment, Automatic Loading Attachment, Spur Cutter Sharpening Fixture, Shaving Tools and Master Gears.
F38 FERRANTI 5* Coordinate Inspection machine. Sales and Specification
Folder. 7 pages.
F38 FERRARI (C.B.Ferrari) M1R, M2R, M1R-RQA, M2R-RQA Precision Universal
Milling Machines. Sales and Technical Specification Catalogues. English and
French Text. 32 pages
F39 FICEP Universal Ironworkers Models Super 10, Super 13, Super 14, Super 16, Super 20, Super 25. 35UIW Single End Punching Machines Models
50, 65, 90 and 120 and Includes details of the various attachments including Plate Shears, Vertical Croppers, Oblique Croppers, Notchers, Punches.
Two Highly detailed and Well-illustrated Sales, Technical Specification and Accessories Catalogue giving details of capacities, punch types and lots of
additional technical data. 42 pages.
F39A FICEP Spares and tools for "Standard Super" Universal Iron Workers. Gives details of tooling for
handling plates, flat, rounds, squares, angles and tees from 90 through 45 degress and other sections and "Special Equipment.
Detailed and well illustrated Sales and Technical Specification catalogue. 18 pages.
F39B FICEP UIW Universal Iron Workers Models UIW45, UIW60, UIW80, UIW100 and UIW125. Sales, Technical Specification and Accessories Catalogue.
12 pages.
F39C FICEP Universal Iron Workers 10E and "Jolly". Sales, Technical Specification and Accessories Catalogue. 10 pages.
F39D FICEP Automatic Billet Shears Model CGC40, CGC60, CGC80, CGC100, CGC125, CGC160, CGC200 CGC1750, Model F180, F360, FF560, F800, F1000, F1200 and F1600.
Sales, Technical Specification and Accessories Catalogue. 16 Pages.
F39E FICEP Portable Bar Shears Models "Beton" Sizes 26, 32, 40, 50 and 60. Model CAM Power Driven Bar Benders Models
CAM 26DV, CAM 32TV, CAM 32V, CAM 42V, CAM 42TV and CAM 52V. Hand Lever Operated Models 82, 810S, 814 and EDIL 16. Bar Benders Model 940 and 932
Sales, Technical Specification and Accessories Catalogue. 14 pages.
F39F FICEP Alligator Shears Models CCl400, CCL600, CCL750, Cayman No.1, Cayman No.2, Cayman No.3 and TR800.
Sales & Technical Specification Catalogue. 16 Pages.
F39G FICEP General Catalogue showing the Types: Hand & laver-Operated Punching and Shearing Machines; the "Beton" Portable Bar Shears
and Bar Benders; Alligator Shears; Shears for Stee and Rolling Mills; Friction Screw Presses;Billet and Bar Shears; High-speed Counter-Pressure Bar Shear;
UIW Punching Machines,Model UIW Ironworkers; Model "Super" Ironworkers; Model 34 UIW/FM Single End Punching Machine;
and Automated Frabricating Systems. 32 Pages.
F40 FIELDING Lathes (Keighley, England). Sales, Technical Specification and
Accessories Catalogue "Cygnet" and "Swan" Models. 4
pages.
F42 FIMAP TP-22-A Toolroom lathe. Sales, Technical Specification and
Accessories Catalogue. 16 pages. . Contains useful annotated diagrams
showing the control system and function of all the levers and buttons.
F42A FIMAP Jig Borer Model "Olympic". Sales and Technical
Specification Catalogue. 14 pages.
F43 FIRTH-BROWN "Hardometer" hardness testing machine. A superb
publication with many illustrations and detailed text 36 pages.
F44 Fischer (George Fisher +GF+). Explanatory catalogues explaining the
function, tooling and one-off applications for Fischer lathes. 12 pages
F44A Fischer (George Fisher +GF+) KDM-2-7, KDM-9, KDM-A11, KDM-14, KDM-A18, KDM-A18-25, KDM-19, NDM-14, NDM-17, NDM-22, ZM-semi automatic and ZM-fully automatic lathes. Sales and Specification Catalogue. 20 pages (1975).
F44B Fischer (George Fisher +GF+) KDM-A11 and KDM-A18 Copying Lathes. Detailed and beautifully illustrated Sales and Technical Specification Catalogue. 38 pages.
F44C Fischer (George Fisher +GF+) KDM-A Series Copying Lathes. Detailed and beautifully illustrated Sales and Technical Specification Catalogue. 38 pages.
F44D Fischer (George Fisher +GF+) Type ZM End-turning Machines. Sales and Specification Catalogue. 26 pages (1975).
F44E Fischer (George Fisher +GF+) KDM Lathes. Detailed Information Booklet on the KDM-28/7-F that explains all the functions of the lathe, its capabilities and construction. 36 pages.
F44F Fischer (George Fisher +GF+) Accessories for KDM Lathes. Comprehensive Catalogue detailing the mechanical additions manufactured and the various items of tooling supplied. 65 pages.
F44Z Fischer (George Fisher +GF+) Straightening Machines Series TRM for sheet metal parts and strips with automatic levelling pressure and feed drive control. Detailed and well-illustrated Sales and Technical Specification Catalogue together with three technical articles: an 4-page article explaining high-precision levelling of sheet metal parts on roller levelling machines; a 4-page article about roll levelling of flat parts for welding and a 6-page article concerning straightening circular saw blades with roll straightening machines. 25 pages.
F45 FITCHBURGH (USA) "So-swing" rapid production,
multi-tool head lathe. 26 pages.
MS218 Flexispeed, Perris and Norfolk, Hector, Simat 101, Meteor, Meteor 2,
Perris and Derivatives. A complete 150-page Data Pack containing everything
ever published for these miniature lathes: Sales and Specification Sheets,
Illustrated Parts Manuals, sheets of Assembly Instructions for the Perris
version and the Flexispeed, Simat and Meteor. A separate 8-page Manual for
the Meteor 2 is also included. Full-size "blue print" (in sections) and an
additional 8-page Mk. 1 Sales and Specification and Accessories Catalogue
together with specification and price lists from the 1970s.
F48 FLOTT Drills Catalogue collection.TB-6 high-speed miniature (2 pages); SB23 V-belt drive Mk.1 and Mk.2 (4 pages);
SB23ST variable-speed drive (2 pages); full range catalogue (16 pages) showing the types: SB32STV and SB32V,
SB32ST and SB32,SB25STV and SB25V, SB25ST and SB25, SB23L, TB23L, TBZ23L, SB16ST, TB16ST, TBZ16ST, SB16, TB16 TBZ16,
15ST, SB15, TB15, TBZ15, 15G, SB15GL, TB15GL, TBZ15GL, TB6S, TBZ6S, SBM3ST, TB3ST,TBM3ST, SBM3, TBM3,
TB13ST(E) Electronic, SBM2, TBM2, SBM2ST, TBM2ST, TB210 and TB10ST (24 pages in total)
F52 FMO 16-80 and VF250 Lathes (Vuilleumier Freres) Sales and Technical Specification Catalogue Collection. Includes English, French and German text. 30 pages.
F55 FORBES Lathe. Sales and Technical Specification Sheet. 1 -page
F60 FORTIS LATHE. Sales and Technical Specification Catalogue. This was a
British version of the Clausing 100 lathe. 4 pages.
F70 FORTUNA Grinders All-MODELS Sales and Technical Specification Catalogue.
22 pages.
F80 FORTUNA Power Hacksaw Machines circa 1920 to 1930 showing the Types M, EM, K,
EK, L, WM, WEK and WK - probably the Company's full range. 18 pages.
F85 FOSDICK Jig Borer a detailed and well-illustrated Sales and Technical Specification Catalogue. Also contains brief details of the company's radial-arm and other types of drill. 22 pages.
F90 FOSTER Machine Company (USA). Complete and well-illustrated Sales, Technical Specifications and Parts
Manual-Catalogue showing Lathes, Screw Machines,Turret Lathes, Weigel Drills, Tooling and Accessories. 146 pages.
F100 FOX Milling Machines USA. Sales and Technical Specification Catalogue
circa 1913. 27 pages.
F300 FRIKLA Tool and Cutter Grinder. Sales and Specification sheet. 2
pages.
F350 Froidevaux (Albert Froidevaux of Switzerland, the "AF" Company) Catalogue of Tools For Watchmakers and Jewellers dated 1954.
195 pages of virtually everything used in the horological trade for the manufacture and repair of watches and clocks, etc.
English, French and Spanish text. A high-quality, bound reproduction. 196 pages.
F400 GAITZSCH Milling Machines Models GHH and GHFN (plain and power feed types). Sales and Technical Specification Catalogue
4 pages.
GALLIC Machine Tools see under "Mondiale"
G10 Gamages (London) 3-inch and 2 1/8-inch lathes. Sales and Technical
Specification Sheet 2 pages.
G50 GARAVAGLIA (Guiseppe Garavaglia) Shapers: Sales and Technical Specification
Catalogues for the 20-inch and 24-inch (in English); 28-inch (Italian and English); General Shaper Catalogue (English & Italian). 11 pages
G100 GARDINER Surface Grinder Model 618. Catalogue. 14 pages.
G105 GARVIN (USA) Superb Catalogue 1908 Edition "D". This shows
Millers, Duplex Millers, Lincoln Milers, Special Drills, Tapping Machines, Tool
and Cutter Grinders, etc. (no lathes). 96 pages.
G105A GARVIN (USA) Superb full-range Catalogue 1906. Quite different to the
above Garvin Catalogue with engravings rather than photographs. Shows a huge
collection of machines including: millers, lathes, a wide range of lathe
accessories, tapping machines, profiling machines (slotters), dividing and
indexing attachments, milling accessories and cutters, machine vices, tool
and cutter grinders, surface grinders, die-slotting machine, screw machines
(capstans), tapping machines, drills, spring coiling machines and countershaft
units, etc. A wonderful book of early American machine tools. 214 pages.
G108 Gauthier Swiss-Type Automatic lathes Catalogue Collection covering the models:GM25, GM75, GM127, GM127-4, GM127-S and the W1. 46 Pages.
G110 GEBR. GOTZ (GG) Machine Tool Catalogue 4 pages.
G115 GEMINIS lathes (Spain) Series 1200, Series 1800, GE1200, GE1200S, GE970,
GE870, GE650 GE500. Sales and Technical Specification Catalogues. 32 pages.
G120 GEORGE ADAMS: Watchmaker's Plain and Screwcutting Lathes. Catalogue 1931
(covers most of the lathes and milling machines marketed during the period the
period 1910 - 1940) Profusely illustrated. 47 pages.
G120A GEORGE ADAMS 1907 Catalogue - Precision and Larger Lathes and
Attachments. 12 pages.
G120B GEORGE ADAMS: Woodworking Tools. Catalogue 1925. Every tool connected
with woodworking and associated trades. 80 pages.
G125 GF Copying Lathes: Accessories Catalogue illustrating all the fitments
made for these lathes. 65 pages.
G127 Giddings & Lewis 70 Series Machine Tools. Full-range catalog from 1965 with an introduction over several pages with the history of the Company, pictures of Manufacturing Plants, early NC developments and showing Jog Borers,
Models E-Type, G-Type, H-Type, N-Type, Table and Floor Types of horizontal borers, Model H Planer-type borers. Model R and Model V "Huge" and "Giant" horizontal borers, Numeripoint NC Control systems, NC Machining Centres, NumeriCenter-H tool changers,
NumeriCentre-V vertical spindle machining centre, Model SS-70, vertical turret lathes with 36", 48" and 60" tables, NumeriMite drilling, tapping and boring machines, Bed-Type DiMill NC contouring machine, bed and floor types of horizontal-quill
milling machines, Variax 4 and 5-axis contour milling machines, NumeriMill rail and bed-type NC contour miller, Model D table-type horizontal borers, Planers, Bickford heavy-duty radial-arm drilling machines and
general-purpose and production upright drilling machines. 90 pages.
G127A Giddings & Lewis Hypro Double Housing and Openside Planers. Highly detailed and well-illustrated Sales and Technical Specification Catalog.52 Pages
G127B Giddings & Lewis Models A110, A110-T, A130, A130-T with plain table and A110-RT, A130-RT and A130B-RT with
integral rotary table. Sales and Technical Specification Catalog. 24 pages.
G128 Gildmeister TRV40 Drum Type (Revolver Horizontal Turret) Capstan Lathe. Detailed and well-illustrated Sales and Technical Specification
Catalogue. 13 pages.
G129 GIMA Drilling Machines Models A-59, A-60-S, B-59, B-60-S, IGM-30-8, IG-30-8, IB-30-8 and IMB-30-8. Sales, Technical Specification and Accessories Catalogue.
14 pages.
G130 GISHOLT Balancing Machines. Sales and Technical Specification Catalogue.
36 pages.
G135 GLASS Oil Grooving Lathes. Sales and Technical Specification Catalogue.
4 pages.
G140 GLOBE MILLING ATTACHMENT (USA). Two editions of the Detailed and well-illustrated Sales and Technical Specification
Catalogue. 16 pages.
G145 GOLD-SEAL Sebastian (USA) lathes - see under SEBASTAIN
G150 GOODELL-PRATT (USA) Whole range Tool Catalogue 1926 including their range
of small lathes. 400 pages. .
G150A GOODELL-PRATT Lathe section of the Catalogue only listing all the
different models and full range of accessories: 23 pages.
G152 GORNATI 6-inch to 12-inch centre height lathes (6", 7.5",
8", 9", 10" and 12"). Sales and Technical Specification
Catalogue. 4 pages.
G160 GORTON Vertical and Universal Millers. Range Catalogue 1961 16 pages.
G160A GORTON Vertical and Universal Millers. Range Catalogue 1963 12 pages.
G160B GORTON Vertical "Mastermill" Catalogue 1964 16 pages.
G160C GORTON General Catalogue: Milling, Profiling, Duplicating, Die Sinking,
Engraving and Special Machines. 12 pages.
G160D GORTON 2.30 Vertical Milling Machine Sales and Technical Specification
Catalogue. 14 pages.
G160E GORTON Die and Mold Duplicators. A superb catalog with comprehensive details of machines
and many pictures of work examples produced. 30 pages.
G160F GORTON 8-D and 8-D Duplicating Machines. Catalogue 8 pages.
G160G GORTON Pantograph Engravers and Tool & Cutter Grinders. Sales & Technical Specifcation Catalogue
with comprehensive details of the models sold during the 1950s and 1960s.
Covers the Types P1-2 (formerly the 3-U), 3-Z. P1-3, P2-3 (formerly the 3-L), P3-2 (formerly the 3-S),
the Graduating Machine 687-3 for engraving micrometer collars, the Types 265-7 and 375-3 Cutter Grinders,
the Spit-Fire Electric Arc Etcher, Motorised Spindles and all the many accessories
including Adjustable Forming Dies, the Roll Attachment, Adjustable Forming Dies,
Micrometer Down-feed Unit, Remote-control Downfeed, Uni-ball Depth Regulator, etc. 24 pages..
G166 GOSMETA Full-range Machine Tool catalogue 1960s. Shows the full range of Lathes (Centre, Toolroom, Capstan), Eccentric Presses,
Milling machines, Presses, Shears/Guillotines, Press Brakes, Plate Benders, Nibblers, Chucks, Toolposts, Dividing Heads, Rotary Tables,
Bench and Pillar Drill Presses, Radial-arm Drills, Hacksaws, Bandsaws, Circular Saws, Carbide Tool & Twist Drills Grinders, Surface Grinders,
Horizontal Borers, Shapers and Welders. Text in English, French, German, Italian and Spanish. 106 Pages. (Ask for individual extracts)
G166A GOSMETA Lathes Types D-135, D-180, D-220, D-310A, D-310B and D-410. Sales & Specification Catalogue. 6 pages.
G166B Gosmeta Inclinable Presses Models EPS-30, EPS-40, EPSR-40, EPS-60, EPS-60, EPSR-60, EPSR-80 and EPSR-100. Sales & Technical Specification Catalogue. 4 pages with an electrical schematic.
G166C Gosmeta Straight Back Eccentric Presses Models EP-6, EP-13, EP-25, EP-40, EP-60, EP-80 and EP-100. Detailed Sales & Technical Specification Catalogue with full data about the machines' capacities, construction and functions.
Includes cutaway drawings. 12 pages.
G170 Gould & Eberhardt Shapers 1950s and 1960s. Covers the 14” and 16” Toolroom Models and 20", 24" and 32" Industrial Models.
A very detailed Sales & Technical Specification Catalogue that describes every aspect of the machines’ construction, operating principles,
lubrication system and accessories. 16 pages.
G170A Gould & Eberhardt Gear Hobbing Machines Types 16H, 24H, 36H, 48H, 72H. The usual very high-quality Gould and
Eberhardt Publication with complete details of the machines' construction,
and operating principles. 28 pages.
G173
GRAFFENSTADEN SACM Societe Alsacienne De
Constructions Mechaniques. Full-range Milling Machine Sales Technical
Specification Catalogue circa 1940s showing the No.1, No.2, No.2 and No.2 Horizontal, Universal and Vertical Milling Machines. Lots of well illustrated pages with an
abundance of technical details that make it almost as useful as a manual. 23 pages.
G173A
GRAFFENSTADEN SACM Societe Alsacienne De
Constructions Mechaniques. F.U. and F.H. Universal and Plain Milling
Machines. Sales and Technical Specification Catalogue 1951 English text. 48
profusely illustrated pages.
G173B
GRAFFENSTADEN SACM Societe Alsacienne De
Constructions Mechaniques FH.073 and FU.073 Milling Machines. Sales and Technical Specification Catalogue 1957. FRENCH TEXT. 32 pages.
G173C
GRAFFENSTADEN SACM Societe Alsacienne De Constructions Mechaniques. FB Fixed bed, ram-type Milling Machines. Detailed and well-illustrated Sales
and Technical Specification Catalogue 1971 English Text. Two editions are included, 40 pages.
G173D
GRAFFENSTADEN SACM Societe Alsacienne De.
Constructions Mechaniques Series 126 Knee-type Milling Machines. Sales
and Technical Specification Catalogue Circa 1970s. English text 16 pages.
G173E
GRAFFENSTADEN SACM Societe Alsacienne De.
Constructions Mechaniques FBH 1614 and FBV 1614 Fixed-bed Milling
Machines. Sales and Technical Specification Catalogue 1971. English, French
and German text. 4 pages.
G173F
GRAFFENSTADEN SACM Societe Alsacienne De.
Constructions Mechaniques FRENCH TEXT All-models Sales and Accessories
Catalogue 1951 including milling technical data. Includes the Types F.U.041,
FOH.051, FOV.051, FH.071, FU.071, FU.102, FU.122, FU.141, FH.102, FH.122,
FH.142, FV.102, FV.122, FV.142, FF.101, FF.121, FF.161, FR.101, FR.141 and the
FR.221. 50 Pages.
G173G
GRAFFENSTADEN SACM Societe Alsacienne De.
Sales & Technical Specification Catalogue for the Table-type Boring & Milling Machines AF.071//75, AF.081, AF.101, AF.111, AF.131 & AF.161. Planer Type Horizontal Boring & Milling Machines AP.101, AP.111 & AP.131
Floor-type Boring and Milling Machines AM.111, AM.131, AM.161 % AM.161 Heavy Duty. Single Column Vertical Turret Lathes TV.082R, TV.102R & TV.141. Double Column Vertical Boring & Turning Mills TW.182 & 1730/1H.
Plain Horizontal and Universal Milling Machines FH.072, FH.102, FH.122, GH.3, FU.072, FU.102 & FU.122. Vertical Milling Machines FV.102, FV.122 & GV.3. Kneeless Vertical Millers with swivelling Head FF.072, FF.101, FF.121,
FF.161. Horizontal & Vertical Automatic Production Millers FOH.061 & FOV.061.
G173H
GRAFFENSTADEN SACM Societe Alsacienne De.
G175
GRAND RAPIDS (Gallmeyer & Livingstone) Universal Tool & Cutter Grinders Models 3, 4, 5, 10, 12, 60 and 62
Five detailed Sales, Technical Specification & Accessories Catalogs covering from the 1930s to the 1970s i.e.early to late models. 64 pages.
G175A
GRAND RAPIDS (Gallmeyer & Livingstone) Surface and Cylindrical Grinders. Nine Detailed Catalogs showing probably the
full range as made from the 1940s until the 1970s. 116 pages
G176
GRANOR (Graham and Normanton) Shapers. All models
Sales and Specification Sheet. 2 pages.
G176A
GRANOR of Halifax (Graham and Normanton) Machine Tool Range Catalogue +
Shaper Sheet 9 pages.
G176B
GRANOR of Halifax (Graham and Normanton) Heavy-duty Lathes: 4 Sales
and Technical Specification Catalogues covering machines made from the late
1940s until the 1960s. 30 pages.
G176C
GRANOR of Halifax (Graham and Normanton) Shaper Catalogue with basic
maintenance Instructions 22 pages.
G180
GRANVILLE lathes and milling machine. The complete set of known Catalogues
for this make including three for the "SENIOR" 3.5" and 4"
Models; one for the STAR lathe and another for the Milling Machine.
G185
GRAVES (England) NV and NV Portable Lathes Sales and Technical Specification
Catalogue 6 pages.
G190
GRAY (USA) Milling Machines: Sales and Technical Specification Catalogue
16 pages.
G200
GRAYSON 3.5-inch and 3-inch Sales and Technical Specification and
Accessories Catalogues. Two editions, one early one late with different cover
picture and prices. 8 pages.
G200A
GRAYSON Sales Booklet "Bench Tools and Materials" circa
1939/40. Shows a range of equipment including vices, drills, chucks, hand
tools, saw benches, grinding wheels, lathes, motors, stands and drive systems,
etc.36 pages.
G205
GRAZIANO SAG 12 Sales and Technical Specification and Accessories
Catalogues. Early and Late Editions with separate Accessories Brochure. 12
pages.
G205A
GRAZIANO SAG 14 and 180 Sales and Technical Specification and
Accessories Catalogue. 12 pages.
G205B
GRAZIANO SAG 20 Sales and Technical Specification and Accessories
Catalogues. Early and Late editions. 34 Comprehensive pages.
G205D
GRAZIANO SAG 180 Sales and Technical Specification and Accessories
Catalogues. Early and late Editions. 12 pages.
G205E
GRAZIANO SAG 210 Sales and Technical Specification and Accessories
Catalogue New Model with flat-front headstock and circular-form splash back.
16 pages.
G205F
GRAZIANO SAG 230 Sales and Technical Specification and Accessories Catalogue.
8 pages.
G205G
GRAZIANO SAG 508 and SAG 20 Sales and Technical Specification and
Accessories Catalogue. 16 pages. G205H GRAZIANO SAG 20, SAG 22CN, SAG 14
and SAG 12 Lathes. Basic Sales and Technical Specification Catalogue. . 4
pages.
G205J
GRAZIANO Hydraulic Copying (Tracer) Attachment T Series. Detailed
Technical Sales and Specification Catalogues. 8 pages.
G210
GRAZIOLI Lathes and Milling Machines Catalogue (in English) showing the
Fortuna 150. Dania 180 and 215 and G.300 lathes and the Milling machines M.Zero, Ludor 1, Ludor 1V, Ludor 2, Ludor 2V, Ludor 3 and the Ludor 3V. 16 pages.
G210A
GRAZIOLI Dania 200 and 250 lathes. Detailed Sales and Technical
Specification Catalogues in English. 16 pages.
G210C
GRAZIOLI Lathes - Two Catalogue in Italian showing the:
Fortuna 150 and 175 lathes, Dania 175, 180. 200, 215 lathes, G.250, G.300 and G.303 lathes,
M.Zero Horizontal miller, Ludor 1 Horizontal miller, Ludor 2 Horizontal miller,
Ludor V.2 Vertical miller, Ludor 3 Universal miller and the Ludor V.3 Vertical
miller and TR200 Lathe Capstan attachment. 24 pages.
G233
GREAVES (USA) No. 2 Universal Miller: Sales and
Technical Specification Catalogue. 4 pages.
G234
GREAVES (USA) No. 2-H Plain and Universal Miller: Sales and Technical
Specification Catalogue 4 pages.
G235
GREAVES (USA) No. 2 Plain Miller: Sales and Technical Specification
Catalogue 4 pages.
G250
GREAVES-KLUSMAN (USA) Lathes Sales and Technical Specification Catalogue
1918 - 1922 8 pages.
G255
Greenfield Tap & Die Corporation No.2 Universal Tool & Cutter Grinder. Sales, Technical Specification and Accessories Catalogue. 4 pages
G265
GRIMSTON Drills and other machine tools. Complete maker’s catalogue covering from the mid 1950s to 1966.
Includes the full range of geared-head drills the E46, LE46, AH, S, E47, LE47, E44, E45, LE44, LE45, E46, LE46, E47, E48, E49.
Belt-drive bench and pillar drills Models 1B and 1P, Drills with power down feed, Ganged Production drills, versions
of the various models as Box Column types, All-geared 24” General-purpose Drills, belt-drive drills, No. 1 Compound Table,
No. 2 Compound Table, Stand-mounted Series 11 and Series 11/R Co-ordinated drills with compound table, Series 111 Numerically-controlled
Co-ordinate drilling machine and double-ended grinding and polishing machines and price lists. 68 pages.
G280 Grindturn - Haighton Miniature Lathe. Sales, Specification and price sheet, 1949 showing the lathe.
mounted on baseboard with accessories. 1 page.
G285 Grudelbach & Schutter Transportable Universal Radial-arm Drilling Machine Models B25, B30, B40, B50, B60, B80, B100, B200 and variants. Sales and Technical Specification catalogue. English, German and French Text. 16 pages.
G290 GSP Guillemin, Sergot, Pegard Machine Tools, Paris. Catalogues showing the company's Shapers (4 pages), Vertical Drilling & Boring Machines (2 pages) and Radial-arm Drilling Machines (12 pages)
G300/MG925 GUILDER Model Builder Lathe. Simple Set-up and Instruction Sheets
together with the Original Sales and Technical Specification Catalogue, Price
Lists and Customer Correspondence. All known literature for this model is
included. 17 pages.
Guilder Model-maker Lathe. Small data pack of Adverts and Simple Instruction
Sheet.
G400 Guztiok'bat Urutzpe (Spain) Lathes Types Super AT, Super BT and Super M. Technical Specification and
Accessories Catalogues. 16 pages.
H4 HABEGGER Lathes A superb, full-range Catalogue showing the lathes types OPT, OPTE, No.1
WTE No.55, Type 1 WT No.51, Type 2, No.71, Type 2 No.72, Type 2 No.73, Type 2 SG,
Type TDLG, Type TDLE, Type DLZF, Type DLZG, Type ORTE, Type 3 RTE, Type 3F, Type 3 S,
Type 4 SG, Type 4 SG-A, Type 5 ZG F, Type 6 F38, Type 6 F64, Type NDS 650, Type NDSE 650,
Type ND 900, Type NDE 900, Type NDE/F-950, Type NDE/S-950. Screwcutting Attachments for the Plain-turning Lathes, Five different Drive and countershaft Systems, nine alternative designs of Headstock, Headstock raiser Blocks and variations of Pulley Design,
Dividing Attachments, Milling Slides and Machine Vices, 3 and 4-jaw Chucks, Collets, Collet Closers, Centres, Faceplates, four alternative Tailstocks, Capstan attachments and Capstan Tooling, alternative Screw and
Lever-action Slide Rests for precision plain-turning and production work, Boring Bars, Toolposts, Turning and Boring Tools, Alternative Beds, Alternative Stands, Wood-Turning Rest, Steadies, Milling Table, 70 pages.
H4A HABEGGER Complete Range Sales and Technical Specification Catalogue early
1950s. Some English but mostly French and German text.(not a first-rate copy,
but the information is complete) 49 pages.
H4B HABEGGER Toolroom lathe JH102 for bench mounting. Sales,
Technical Specificationand Accessories Catalogue. 6 pages.
H4C HABEGGER Toolroom lathes on Underdrive stands, Technical Specification and
Accessories Catalogue. 6 pages.
H4D Habegger Special Accessories for Precision Lathes Catalogue. Shows all the
different beds, headstocks, tailstocks, stands, drive systems, accessories,
collets, chucks, slide rests and production equipment, etc. 27 pages.
H4E Habegger Metal-cutting Bandsaws. Two Sales & Specification Catalogues. 16 pages.
H4Z
HABEGGER Catalogue Collection comprising:
H4 HABEGGER lathes Complete range Catalogue with Accessories, Stands, Drive Systems and Tooling. 70 pages.
H4A HABEGGER Complete Range Sales & Technical Specification Catalogue early 1950s. Some English but mostly French & German text.(not a first-rate copy, but the information is complete) 49 pages.
H4B HABEGGER Toolroom lathe JH102 for bench mounting. Sales, Technical Specification and Accessories Catalogue. 6 pages.
H4C HABEGGER Toolroom lathes on Underdrive stands, Technical Specification and Accessories Catalogue. 6 pages.
H4D Habegger Special Accessories for Precision Lathes Catalogue. Shows all the
different beds, headstocks, tailstocks, stands, drive systems, accessories,
collets, chucks, slide rests and production equipment, etc. 27 pages.
H4E Habegger Metal-cutting Bandsaws. Sales & Specification Catalogue. 16 pages
H6
HAHN and KOLB Variomatic Rotary Transfer Machine T3. Sales and Technical
Specification and Accessories Catalogue. 16 pages
H6A
HAHN and KOLB WS54 Tool & Cutter Grinder. Sales and Technical
Specification and Accessories Catalogue. 8 pages
H6B
HAHN and KOLB TORNOMAT 2, TORNOMAT 3, TORNOMAT 4, and CNC TORNOMAT P Automatic Polygon Turning Machine.Sales and Technical
Specification and Accessories Catalogue. 16 pages
H9
HALIFAX 524 Lathe (English-built Atlas 10-inch) 6 pages.
H10
HALCO Universal Hi-speed Head Milling Attachment Sales and Technical
Specification Catalogue 4 pages.
H10A
HALLER UFS155 Universal Spiral Grinding Attachment for use on tool and cutter grinders. Detailed Sales and Technical
Specification Catalogue 8 pages.
H10V
HAMI 5LD and 6LD Gear Testers Catalogue. 4 pages.
H11
HAMILTON Associates (USA) Modern Combination Lathe and Miller with a round
bed, plus the Vertical and Horizontal Millers. Sales and Technical Specification Catalogues with price list. 1967 12 pages
pages.
H12
HAMILTON Machine Tool Co. (USA) Lathes and Planers. Comprehensive
Catalogue circa 1913 - 1915 showing the machines generally available from 1905
to 1920. 64 pages.
H13
HAMILTON Machine Tool Co. (USA) "Tools for the Machine Shop" Tiny
brochure with lathes, drills, planer and shaper - circa 1900/1910 17 pages.
HARDINGE - see also CATARACT for other models of lathe and miller.
C11
CATARACT (Hardinge) Wonderful Full-range Catalogue circa 1910 - 1920 showing
all the Precision Bench and Screwcutting Lathes, Milling Machines of the MD3,
MD4, BB2V, and MD5 types, Automatic Gear and Pinion Cutters, Drills and the
full accessory range. Although not a handbook, there are many descriptive and
illustrative details of the machines' construction, drive systems and
countershafts including sectional drawings of the various headstocks. 116
pages.
C11A
CATARACT (Hardinge) 1902 Catalogue: Bench Lathes and Attachments;
precision bench drill. 29 pages. Not a first-class copy.
C11B
CATARACT (Hardinge) Precision Lathes and Millers Full-range Catalogue
circa 1930s. A later version of the Catalogue above (C11A) which illustrates
many of the accessories also used on the last of the Cataract Brand lathes made
by Hardinge. 50 pages.
C11C
CATARACT (Hardinge) No. 5 open-headstock flat-belt drive Milling Machine.
Sales and Technical Specification Catalogue. 2 pages.
C11D
CATARACT (Hardinge) MD3 and MD4 Enclosed Head Precision Bench Milling
Machines. Sales, Technical Specification and Accessories Catalogue. 4 pages.
C11E
CATARACT (Hardinge) MD5 Precision Milling Machine. Sales, Technical
Specification and Accessories Catalogue. 4 pages.
H16
HARDINGE LATHE CATALOG COLLECTION consisting of the full, detailed and well-illustrated catalogs for the HLV, HLV-H, HLV-H Hydraulic-copy (tracer) model, DSM 59, HCT, HSL Five-Nine Speed Lathe, DSM59, DSM59-R, VBS, VBS-R, AHC and HC. 176 pages. (individual catalogs available below).
H17
Hardinge Tool Room Milling Machine: Catalogue 11 pages.
H17B
Hardinge Tool Room Vertical Milling Machine Model BB4: Sales and
Technical Specification Catalogue 2 pages.
H17C
Hardinge Tool Room Vertical Milling Machine Model BB2V: Sales and
Technical Specification Catalogue 2 pages.
H16
HARDINGE No. 4 catalogue dated 1901. Superb, fully illustrated and written
guide to Hardinge Machine Tool and watchmaking Accessories: collets, drill
press, Model A lathe, pivot polisher and attachments, universal wheel cutter
and attachments, rounding up tool for wheel cutting attachment, cutters for
wheel and pinion, powdering mortar, arbor chucks, screw chucks, cement brasses,
jumbo chuck, cement brass die, Fuch’s Universal Arbor Chuck, the Hardinge
Escapement Matching Tool, watch oiler, Connor’s Watch Oiler, wax chucks, wood
chucks, jewelling chucks, roller chuck, crown chucks, jewelling chuck soft
steel, Hardinge cylinder wire chuck, old style gem chuck, Enlarged Dale Drill
Chuck, Jewel pivot drill chuck, Dale centring chuck, screw finishing chuck,
Trued Dale Pivot Drill Chuck, hand turning chucks, dead centre whirl, pivot
straightener, hair spring remover, balance truing pliers, ball bearing thrust
(lathe spindle thrust improver), stone setting chuck, lap truing chuck, clock
and watch closing punch, pendant bow milling tool, emery facer, bell metal
slips, box wood slips, screw pressure punch, watchmakers' grinder, balance
chucks, universal high-speed attachment, Scholer Crown Chuck, screw bluing
appliance, pendant taps, pin vises, backrest (steady rest) for lathe, speed
wheel, Buff chuck, The Hardinge Eclipse Lathe Fixture, Eclipse Fixture Slide,
Owen’s Stone Setting Device, tweezers, tempered pivot and drill wire.
Kraehmer’s Patent Glass and Bezel Gauge, box tool independent reversible 4-jaw
chuck Hardinge Improved Roller and Hand Remover, spectacle screw driver,
jewel burnisher, lathe chuck handle, stumps for staking tool, Hardinge Stepping
Device, rotary hand pivot polisher, Harding Clock Pivoting Device, Hardinge
Handy Tripod, jewel pushers, true taper chucks and faceplates, work carriers,
square back centre, taps dies and adjustable hand dies, chuck socket and draw
back chuck and draw spindle, improved ground thrust chucks, etc.72 pages.
H16A
HARDINGE High-speed Precision lathes (no Model numbers) on open and closed
underdrive stands. Sales and Technical Specification Catalogue - late 1930s
early 1940s. 5 pages.
H16AA
HARDINGE High-speed Precision second-operation lathes (no Model numbers)
on closed underdrive stand. Sales and Technical Specification Catalogue with
accessories - late 1930s early 1940s. 8 pages.£16
H16B
Hardinge Precision Lathes and Second-operation Lathes (no Model
numbers). Detailed Accessories Catalogue - late 1930s early 1940s. 28 pages.
H16CA
HARDINGE DSM59 and DV59 High-speed Precision plain-turning lathes (The first
Hardinge lathes with a Dovetail bed). A superb, dedicated, detailed and well-illustrated Sales, Technical Specification and Accessories Catalogue. 28
pages.
H16D
HARDINGE DSM59 High-speed Precision second-operation Lathe. (The first
such Hardinge with a Dovetail bed) Comprehensive Sales and Technical
Specification Catalogue with accessories - 1945. Full-size 28 page Edition.
H16D2
HARDINGE DSM59 High-speed Precision second-operation Lathe. Simpler Sales
and Technical Specification Catalogue with accessories - 1945. 12 pages.
H16D3
HARDINGE DSM59 High-speed Precision second-operation Lathe. Later, larger
20-page Sales and Technical Specification and Accessories Catalog showing
the lathe on the angular stand with splash back.
H16DSM
HARDINGE DSM-59 late models. These were produced as the DSM-59,
DSM-59R, DBS-59 and VBS-R. Dedicated Sales and Specification Catalogue. 24-pages.
H16F
HARDINGE
HLV-H Super Precision Screwcutting Lathe. Comprehensive Dedicated
Sales and Technical Specification and Accessories Catalogue that shows all
the options ever available for the lathe. 24 pages.
H16FA
HARDINGE HLV Super Precision Screwcutting Lathe. The first of the
narrow-bed machines with a powered carriage feed. Includes details of the other
lathes based on this model and the company's milling machines. Two slightly
different Catalogues combined. 24 pages.
H16FB
HARDINGE HLV Super Precision Screwcutting Lathe. The first of the
narrow-bed machines with a powered carriage feed. Includes details of the other
lathes based on this model and the company's milling machines. Dedicated
Catalogue. 20 pages.
H16FC
HARDINGE HLV Super Precision Screwcutting Lathe. Chart of Major Tests.
Shows allowable errors for machines after testing. 4 pages.
H16H
HARDINGE HC Super Precision Chucking Lathe. The first of the wide-bed
machines. Dedicated Sales and Technical Specification Catalogue. 24 pages.
H16HA
HARDINGE HC Super Precision Turret (Chucking) Lathe. English-edition
dedicated Sales and Technical Specification Catalogue. 32 pages.
H16J
HARDINGE Super Precision Lathes Catalogue illustrating HLV-H, DSM-A, AHC,
HS-59, HC, TFB-H, DSM-59, HC-AT, DV-59 and collets. 12 pages.
H16HCT
HARDINGE HCT and HCT Precision Chucking Lathe. Sales and Technical
Specification Catalogue. 16 pages.
H16K
HARDINGE HLV Super Precision Screwcutting Lathe. Late Model (1980s) Sales
and Technical Specification Catalogue. 10 pages.
H16HSL
HARDINGE HSL and HSL Five-Nine "Speed Lathe". Two detailed and well-illustrated Sales, Technical Specification and Accessories Catalogues. 32 pages.
H16L
HARDINGE Machine Tools. Sales and Technical Specification Catalogue
showing the Super Slant, CNC Chucker and Bar Machines, AHC-TV, DSM-A,
HSL-Five-Nine, TFB-H, HC-AT, DSM-Five-Nine and Second Operation Machine,
HLV-H, DV-Five-Nine Model Shop Lathe, Accessories and Collets. 16 pages.
H16M
HARDINGE "OmniTurn" CNC Attachments Sales and Technical
Specification Catalogue 8 pages.
H16N
HARDINGE COLLETS A collection of sheets showing different type of collets
and their dimensions and fittings. List of lathes and millers and their collets
and Hardinge equivalents. Includes Sjorgren Collet Chuck information 40 pages.
H16P
HARDINGE COLLETS A collection of sheets showing different type of collets
and their dimensions and fittings. list of lathes and millers and their collets
and Hardinge equivalents. Includes Sjorgren Collet chuck information. 40 pages.
H16NA
HARDINGE 5C Spindle Tooling Catalog. Detailed publication showing the
full range of Collets and Holders. 12 pages.
H19
HARIG TML 6 x 12 Surface Grinder. Sales and Technical Specification
Catalogue. 7 pages.
H30
HARMAL 11"/12" Lathe. Sales and Technical Specification
Catalogue. 6 pages.
H45
HARO (Robert Habib) Universal Precision Tool & Cutter Grinder Type "Haro No. 12"
(Swiss manufacture) Usefully detailed and well-illustrated Sales and Technical Specification
and Accessories Catalogue with examples of jobs. 8 pages.£18
H50
HARRISON Lathes. Fascinating early Full-range catalogue circa 1939/40
including the rare "Union" light-pattern plain-turning lathes, Union
3.5 and 5-inch light backgeared and screwcutting lathes, the first Jubilee wood-turning
lathe and the first of the L5, L6 and L21 lathes in flat-belt and
geared-headstock forms, drills and many other products. 66 pages.
H50A
Harrison UNION L1, L1A 3.5 to 5-inch "light lathes". 3
catalogues in one 12 pages.
H52
HARRISON L5 Lathe Sales and Technical Specification and Accessory
Catalogue circa 1946. 8 pages.
H52A
HARRISON L5 Lathe Sales and Technical Specification and Accessory
Catalogue circa 1950. 8 pages.
H52A
HARRISON L5 Lathe Sales and Technical Specification and Accessory
Catalogue 1959. 8 pages.
H52B
Harrison L5A and "11-inch" Lathe Sales and Technical
Specification and Accessories Catalogue 1966. 8 pages.
H54
Harrison "11-inch" Lathe Sales and Technical Specification
and Accessories Catalogue (L5A - later version). 8 pages.
H55
Harrison "12-inch" Lathe Sales and Technical Specification
and Accessories Catalogue. 15 pages.
H56
Harrison "14-inch" Lathe Sales and Technical Specification
and Accessories Catalogue. 8 pages.
H57
Harrison "16-inch" Lathe Sales and Technical Specification
and Accessories Catalogue. 8 pages.
H58
Harrison "17-inch" Lathe - the one with "angular" styling and 3 downward-pointing levers on the front face of the headstock.
Sales and Technical Specification and Accessories Catalogue. 10 pages.
H59
HARRISON Complete Range Catalogue 1960s. All the above lathe (9",
11", 12", 13", 14", 16" 17") plus drills,
wood-turning Lathes (Graduate and Jubilee) Boxford Lathes, accessories,
grinders, etc. 102 pages.
H68
HARRISON M250 Lathe Catalogue. 12 pages.
H68
HARRISON M250 Lathe Vertical Milling Attachment Catalogue. 2 pages.
H70
HARRISON M300 Lathe Catalogue 12 pages.
H72
HARRISON M350 Lathe Catalogue 6 pages.
H74
HARRISON VS330 TR Lathe Catalogue 14 pages.
H76
HARRISON M400 Lathe Catalogue 14 pages.
H78
HARRISON M450 Lathe Catalogue 14 pages.
H80
HARRISON M500 Lathe Catalogue 14 pages. H82 Harrison "Union"
Tool Booklet - lathes and drills Sales and Technical Specification
Catalogue. 15 pages.
H84
Harrison "Union" Graduate Wood Lathe Sales and Technical
Specification Catalogue. 4 pages.
H86
Harrison "Union" Jubilee Wood Lathe. Three detailed and
interesting Sales and Technical Specification Catalogues - from the first to
the last including a price list. 10 pages.
H88
HARRISON MILLING MACHINE Sales and Technical Specification Catalogue.
Very rare publication showing the Horizontal, Universal, Vertical and Die
Sinking Models (as distinct from the ordinary horizontal with a vertical head)
10 pages.
H89
HARRISON HORIZONTAL MILLING MACHINE: Sales and Technical Specification
Catalogue devoted to the Standard and Universal Models and Accessories. 8
pages.
H90
Harrison Model 10-AA 11-inch Variable-speed Drive - actually a re-badged
Colchester Chipmaster. Sales and Technical Specification Catalogues 6 pages.
H95
Haskins Air-Controlled Tapping Machines Types 1-C, 2-C, 3-C, C-Type and Multi-Unit Type. Very detailed Sales
and Technical Specification Catalogue with essential information about the machines' construction and operation. Includes a catalogue
showing all the Holding and Fixing Accessories, Vises, Air-operated Vises, Piece Part Control Fixtures,
Air-operated Nuts, Dial-feed fixture. 26 pages.
H100 HAUSER rare All-Models Catalogue circa 1950 - Jig Borers, Jig Grinders,
Optical Checking and Measuring Instruments, Special Automatic machines for
Watch and Instrument making. 16 pages.
H100A HAUSER rare All-Models Catalogue circa 1961 - Jig Borers, Jig Grinders,
Optical Checking and Measuring Instruments, Special Automatic machines for
Watch and Instrument making. 38 pages.
H100B HAUSER General catalogue (1986) showing Jig Grinders Models 50L, 50 and
40, Model 2, Model 3. Jig Borers No. 1, No. 2 and No. 3. CNC Controls Types
111, 314 and 311. Profile projectors H751-111, P750-DR, P750, H601, H560, H300.
Workshop measuring microscopes Types H302 and H30. hardness testers 249A
Vickers, 292-DR Rockwell and a number of Special machines. 16 pages.
H100C HAUSER Manufacturing Programme 1982 Catalogue. Shows:. Jig Grinders 2SO,
2S-DR, S3-DR, S3-111, S3-CNC211, S3-CNC311, S40-111, S40-DR, S40-111,
S40-CNC211, S40-CNC311, S50-DR, S50-111, S50-CNC211, S50-CNC311, S50L-111,
S50L-111, S50L-CNC211 S50L-CNC311. Jig Boring Machines Size 1, Size 2, Size 3.
Profile Projectors H300, H560, H601, H751-111. Workshop measuring microscopes
H301 and H302. hardness Testers 292DR and 249A and a number of Special
machines: transfer lines, Pivot polishing, automatic multi-spindle drill,
milling and tapping. 8 pages.
H100D HAUSER Jig Borer Type 1. Sales, Technical Specification and Accessories Catalogue. 4 pages.
H100E HAUSER 2BA and 2A3 Jig Borers. Two separate Sales, Technical Specification and Accessories Catalogues for the later model with "HAUSER" written down
each side of the stand's front face. 24 pages.
H100G HAUSER 3BA Jig Borer. Two separate Sales, Technical Specification and Accessories Catalogues. 12 pages and 4 pages respectively.
H100J HAUSER Type OP2 and OP3 Jig Borers. Two separate Sales. Technical Specification and Accessories Catalogue. 2 pages and 16 pages respectively.
100K HAUSER B3DR Jig Boring machine. Sales and technical Specification
Catalogue. 12 pages.
H100L HAUSER Type 4 Jig Borer. Sales and Technical Specification Catalogue 8
pages.
H100M5 HAUSER Type 5 Jig Borer. Well illustrated and detailed Sales and Technical Specification Catalogue 16
pages.
H100N HAUSER Jig Borer. Special Catalogue in French "Rapport
Technique" showing the use of the rotary and optical and other
attachments. . Includes a general product section. 26 pages.
H100P HAUSER Comprehensive Tools and Accessories Catalogue for Jig Borers. 30 pages.
H100Q HAUSER Type 250 Jig Grinder. Sales and Technical Specification
Catalogue. 4 pages.
H100RS HAUSER Type 3S Jig Grinder. Sales and Technical Specification
Catalogue. 4 pages.
H100RD HAUSER Type 3S-DR Jig Grinder. Sales and Technical Specification
Catalogue. 20 pages.
H100S HAUSER Type 3SM, 3SM0 and 3SMDR Jig Grinders. Sales and Technical
Specification Catalogue. 28 pages.
H100T HAUSER Type 3SMO Jig Grinder. Sales and Technical Specification Catalogue. 28
pages.
H100U HAUSER Type 3SM Jig Grinder Type. Sales and Technical Specification
Catalogue. 28 pages.
H100V HAUSER Type 5SM Jig Grinder Type. Sales and Technical Specification
Catalogue. 26 pages.
H100W HAUSER Types S-40DR and S-50DR Jig Grinders. Sales and Technical
Specification Catalogue. 8 pages.
H100X HAUSER Type S-50L Jig Grinder with straight-cut or continuous-path
control. Sales and Technical Specification Catalogue. 2 pages.
H100Y
HAUSER Tools & Accessories for Jig Grinders. Sales & Technical
Specification Catalogue. 20 pages.
H100Z HAUSER Type CNC 314 Continuous-path Control for Jig Grinders S3, S40, S50
and S50L. Sales and Technical Specification Catalogue. 4 pages.
H102 HAUSER PROFILE PROJECTORS: Models P750, H600, P215, P215 and; KP215E.
Technical Sales and Specification Catalogues. 52 pages.
H102A HAUSER AP-6A PROFILE PROJECTOR. Technical Sales and Specification
Catalogue. 12 pages.
H102B HAUSER PROFILE PROJECTORS H601 and H560. Technical Sales and
Specification Catalogue. 20 pages.
H102C HAUSER PROFILE PROJECTORS H300. Technical Sales and Specification
Catalogue with Special Accessories Catalogue. 4 pages.
H102D HAUSER PROFILE PROJECTORS H601 and H560. Technical Sales and Specification
Catalogue. 20 pages.
H102E HAUSER P320 Toolroom Microscope. Technical Sales and Specification
Catalogue. 8 pages.
H102F HAUSER MP42 7 MP52 High Precision Dividing tables. Technical
Specification and Sales Catalogue 4 pages.
H102G Hauser 241 Pivot Polishing Machine. Technical Specification and Sales
Catalogue. 2 pages.
H102H Hauser 309 Sharpening Attachment (to fit Lathe) for sharpening the face
and periphery of carbide or ceramic polishing wheels. Technical Specification
and Sales Catalogue. 2 pages.
H103 Hauser 190 2-spindle Automatic Profiling Machine. H102G Hauser 241 Pivot
Polishing Machine. Technical Specification and Sales Catalogue. 2 pages.
H103A Hauser 540 Automatic Drilling and Tapping Machine. Technical
Specification and Sales Catalogue. 1 page.
H103B Hauser 543 Automatic 3-spindle Vertical Milling Machine. Technical
Specification and Sales Catalogue. 2 pages.
H103C Hauser 544 Automatic 3-spindle Vertical Milling Machine. Technical
Specification and Sales Catalogue. 2 pages.
H103D Hauser 544B Semi- Automatic machine for milling, drilling and boring
watchcases. Technical Specification and Sales Catalogue. 2 pages.
H103E Hauser 570 Automatic Multi-spindle drilling, milling and tapping machine
for use of watch cases and similar. Technical Specification and Sales
Catalogue. 2 pages.
H103F Hauser 6617 Units for Machining Parts in Metal Strips. Technical
Specification and Sales Catalogue. 2 pages.
H103G Hauser 249A Optical Hardness Tester. Technical Specification and Sales
Catalogue. 2 pages.
H103H Hauser 292DR Rockwell-type Hardness Tester with digital readout.
Technical Specification and Sales Catalogue. 4 pages.
H102Z "Hauser Calling" a Company magazine No. 15 dated November 1969.
40 pages of interesting material about Hauser Profile Projectors, their Optics
and Applications.
H110 Harvey (G.A.Harvey, Glasgow) Sales and Technical Specification Catalogue
showing the Company's vast range of huge and specialised machine tools. Circa
late 1920s/1930s. 152 pages.
H115 HAYES DIEMASTER: Sales and Technical Specification
Catalogue. 6 pages (two Catalogues).
H115A HAYES TRACEMASTER TM43A Automatic Copy Die-Sinking Machine. Sales and
Technical Specification Catalogues. 2 with a total of 16 pages.
H115B HAYES ECONOMILL TRACEMASTER TM43A. Sales and Technical Specification
Catalogue. Includes brief details of the TM54 range, Tapemaster 1380, Gemini,
TM43D, Linemaster, Tapemaster 1090. 6 pages.
H115C HAYES TRACEMASTER TM43-D, TM43-3D, TM-43DS and TM-43DS Automatic
360-degree Copy Profile Milling Machines. Sales and Technical Specification
Catalogue. 12 pages.
H120 HEALD Grinding Machines. Interesting Full-range 1912 Catalogue 118 pages. High-quality reproduction.
H120A HEALD Model 3 Tool & Cutter Grinder Catalogue 4 pages.
H120B HEALD Detailed 1971 All-Models Catalogue showing all the Model A Bore-Matics, Bore-matic Attachments, Slide Units, Borizers,
Transfer Machines, Universal Grinding Machines, Boring Heads, No. 3 Tool & Cutter Grinder, Internal Grinding Attachments, all Gage-Matic and Size-Matic Models
58 pages.
H120C HEALD Bore-Matics. Detailed 1969 Catalogue Showing the full range of Bore-Matic models. 34 well-illustrated pages.
H155 IXION Drilling Machines and Miller Driller BDT-23F. A catalogue collection showing details of the drilling machines types BST-6, BST-10, BST-13, TL-500
Deep hole driller, BSR-13KBST-6, BST-13, BST-13N, BST-13ST, BST-16, BST-13GLU, BST-13NB, BST-13STB, BSS-13G, BSS-13GL, BSS-13N, BSS-16, BSS-16L,
BSS16ST, BSS-16G, BST-13NB, BSR-13, BST-23F, BSS-40, BT-6, BT13, BT15, BTB15, BT20, BT30, BT30AV, BTU/BTS, BS15, BS20, BS25, BS30, BS30AV, BS40,
MK2, MK3, BT15G, BT15GL, BT13GLE, 15GV/GLV, BT30G, BS30GL, BT30GLE, BR15, BRK15, BRK30 BT25F, TL500, BS20Z and RV30
H160 Joshua Heap - Heap's Screwing Machines. Detailed, full-range Technical Specification Catalogue showing every variety of model made. 90 pages.
MS218 HECTOR, NORFOLK, SIMAT Perris, Flexispeed, Simat 101, Meteor and
Derivatives. A complete 150-page Data Pack containing everything ever published
for these miniature lathes: Sales and Specification Sheets, Illustrated Parts
Manuals, sheets of Assembly Instructions for the Perris version and the Flexispeed,
Simat and Meteor. A separate 8-page Manual for the Meteor 2 is also included.
Full-size "blue print" (in sections) and an additional 8-page Mk. 1 Sales and
Specification and Accessories Catalogue together with specification and price lists from the 1970s.
H125 Heid Lathes - Catalogue Collection covering the D400 General-purpose lathe; the DN22, DN26, DN35 and DN40 Heavy-duty High-speed lathes; Copier Lathe (Kopier Hinterdrehen); the Electrical Tracer Control Unit and the Universal Relieving Device. English, French and German Text. 57 pages (some translation duplicates)
HEIDENREICH and HARBECK - see under VDF
H130 HEINEMANN (Gebruber Heinemann St. Georgen im Schwarzwald) Multi-tool,
Production and Capstan Lathes. Metal Shapers. Sales and Technical
Specification Catalogue. 16 pages.
H136 HEMBRUG: Wanted - all kinds of Hembrug Sales and Technical Specification
literature.
H132 HELLER Milling machines FH-120 @ FV-120. Detailed 28-page German-language
Sales and Technical Specification Catalogue with useful sectional drawings
and Illustrations of mechanical assemblies.
H237 HENDEY (USA): Illustrative and Descriptive Catalogue from 1903: Full
Range of Lathes and Shapers. Fabulous pictures of complete machines,
including sections through components, inner views of gearbox and aprons, all
the screwcutting plates, etc. 115 absorbing pages.
H237A Hendey Lathes: "Modern Engine Lathes" Hendey Lathes: "Modern
Engine Lathes" a beautifully illustrated, 67-page catalog of the complete
lathe range as it was in the mid 1920 showing both cone and geared-head models
and the complete accessory range.
Includes a number of useful sectional drawings. Shows lathes spanning the
period from around 1920 to 1930.£65
J237AA Hendey No. 1 General Purpose Lathe Catalogue 4 pages.
H237A2 Hendey: Complete Lathe, Shaper and Miller Catalogue
1931 119 pages. Shows the belt-drive and geared headstock lathes as
manufactured from the late 1930s to the mid 1930s.
MH237B Hendey Lathe Operator's Handbook. The 5th edition of this excellent book
that contains a wealth of data about Hendey lathes from around 1905 to 1944. 88
pages.
H237C Hendey Souvenir Booklet (small format enlarged to A4) 1947 45 pages.
H237D Hendey Lathes Models KK, AA, W, BB, C, 12" helical-geared head lathes.
Sales and Technical Specification Catalogue 26 pages.
H237E Hendey "Factory Tour" photographed by Robert Yarnall Richie. A
Souvenir Publication in large format, giving a complete photographic tour of
the works from boardroom to dispatch department. Dozens of fabulous pictures
and descriptions. 64 pages.
H237F Hendey complete Lathe and Shaper Catalogue 1947. 86 pages.
H237G Hendey Lathe Booklet 1935 (small, enlarged to A5) 22 pages.
H237H Hendey No. 4C Manufacturing Lathe Catalogue. Detailed and
well-illustrated this publication includes instructions about using the special
multi-pitch screwcutting attachment and the apron-controlled feed reverse, etc
18 pages.
H237J Hendey 12", 14", 16", 18", 20" and 24" 12-speed and 16-speed geared-head lathes 1940s.
Two Sales and Technical Specification Catalogue. 20 pages.
H237K Hendey No. 2G Miller with universal milling attachment. 4 pages.
J237M Hendey 9" x 24" Tool & Gage Makers' Toolroom Lathe. Detailed and well-illustrated Sales & Technical Specification Catalogue with the screwcutting chart 12 pages.
H237X All the above Hendey material in one set:
H237Z Reproduction of the "Hendey Book" - a company celebration
publication dated 1922. 110 pages.
H352 HERBERT Turret, Capstan and Auto Lathes and milling machines, etc. A
vast collection of Sales and Technical Specification literature is available.
Please phone: 01298-871633 or e-mail your requirements to :tony@lathes.co.uk
H352DATA
HERBERT Capstan Lathes. A Catalogue Collection Data Pack giving full details of the following:
No. 0, No. 1 No. 2D, No. 2S, No.4, No. 4 Senior, No.4 Senior Preoptive, No. 4B, No.5 and 54 Senior,
No. 7 Preoptive, No. 9B, No. 9C and 9C-3- Combination, No. 9S Combination, No. 12 Combination and No. 14 and 14-36 Combination. 138 pages
H352A HERBERT Machine Tools 1905. Full-range Sales and Technical
Specification Book: pictures of the factories, drills, cutter grinders,
dividing heads, centre lathes, capstan lathes, automatic lathes, milling
machines, vices, stud machines, capstan tooling, presses, powered slotting
machines, hacksaws, etc. 193 pages.
H352B HERBERT (and Edgwick) "All Production Equipment Catalogue"
including: This catalogue gives brief particulars of Herbert and Edgwick
Machine Tools: it covers: lathes, automatics, drilling machines, milling
machines, boring machines, planing machines, threading machines, grinding
machines, sheet-metal working machines, presses and hammers, plastic moulding
machines, dies casting machines and Miscellaneous machines. 130 pages.
H352C HERBERT Machine Tools 1958. Full-range Sales and Technical
Specification Book. Covers all Herbert products and those by companies owned by
Herbert. 104 pages.
H532D HERBERT Capstan lathes from the 1930s. 66 assorted pages showing the
range as sold circa 1930 to 1945.
H352E HERBERT Auto Lathes. Catalogue extolling the virtues of an Auto over a
Turret lathe. Illustrates the models, specifications and gives "worked
examples" of jobs produced. 36 pages.
H352F Herbert Miniature Surface and tool Grinder. Sales, Technical
Specification and Accessories Catalogue. 3 pages.
H352FJ Herbert "Junior" hand-operated Surface Grinder. Sales, Technical
Specification and Accessories Catalogue. A 4-page late edition togther with
a 2-page early version showing the differences as the machine changed from the
Mk.1 to the Mk. 2.
H352G Herbert No.0 Hand-feed operated Horizontal Milling Machine. Sales & Technical Specification Catalogue. 4 pages.
H352H Herbert No.1 Hand-feed operated Horizontal Milling Machine. Sales & Technical Specification Catalogue. 4 pages.
H352J Herbert No.10 Vertical Milling Machine. Sales & Technical Specification Catalogue. 4 pages.
H352K Herbert No.15S Vertical Milling Machine. Sales & Technical Specification Catalogue. 4 pages.
H352LV Herbert No.18V and 23V Vertical Milling Machines. Well-illustrated and detailed Sales & Technical Specification Catalogue. 8 pages.
H352LH Herbert No.18P and 23P Plain Horizontal Milling Machines. Well-illustrated and detailed Sales & Technical Specification Catalogue. 8 pages.
H352LU Herbert No.18U Horizontal Milling Machines. Well-illustrated and detailed Sales & Technical Specification Catalogue. 12 pages.
H352M Herbert No.28V Vertical Milling Machines. Sales & Technical Specification Catalogue. 4 pages.
H352N Herbert No.33 Horizontal Milling Machines. Sales & Technical Specification Catalogue. 4 pages.
H352P Herbert No.35 Horizontal Milling Machines. Sales & Technical Specification Catalogue. 4 pages.
H352Q Herbert No.36 Horizontal Milling Machines (single or duplex spindle). Detailed and well-illustrated Sales & Technical Specification Catalogue. 8 pages.
H352R Herbert No.38 Horizontal Milling Machine. Detailed and well-illustrated Sales & Technical Specification Catalogue. 8 pages.
H354 HERCUS 9-inch Lathe Catalogue. Early edition showing
the "South Bend Clone" lathes in their original configuration. 19
pages.
H354A HERCUS 260 Lathe - late development of the South Bend Clone. Sales and
Technical Specification Catalogue 4 pages.
H354B HERCUS 3A Tool and Cutter Grinder and Hercus 9A Semi-universal Grinding
Machine. 2 Sales and Technical Specification Catalogues. 8 pages.
H354C HERCUS No. 0 Milling Machine Sales and Technical Specification Catalogues. 4 pages.
H360 HERKE Tapping Machines. Sales and Specification Catalogue. 9 pages.
H410 HERMLE UWF-700-PH Universal Toolroom Precision Milling and Boring
Machine. Sales and Technical Specification Catalogue.8 pages.
HERON - see under MISAL
H420 HEIDENREICH and HARBECK Multi-cut lathe "Rapid" Sales and
Technical Specification Sheet. 1 page.
H420A HEIDENREICH and HARBECK Bevel Gear Generating Machine. Sales and
Technical Specification Sheet.
H440 HEINEMANN (Gebruder Heinemann) Shapers: Sales and Technical Specification
Catalogue with historical introduction. 15 pages.
H440 HEINEMANN (Gebruder Heinemann) Lathes and Shapers: Sales and Technical
Specification Catalogue with historical introduction. 16 pages.
H445 HESSAPP "Titan" Fine Turning Lathe. Sales and Technical Specification Catalogue. 8 Pages.
H468 HESTON and ANDERSON (USA) Detailed, well-illustrated Woodworking Machinery Catalogue
and Price List for 1934. Covers: Band Saws, Table Saws, Cutter Heads, Wood Lathes, Wood Shapers (spindle moulders),Planers ("Ball Bearing Jointer"), Swinging Cut-off Saw and numerous Accessories 32 pages.
H490 Hille ABT Schuttoff Universal Thread Milling Machine Series FB - Models with the same centre height but different capacity lengths FB1, FB2, FB3, and FB4. Sales and Technical Specification
Catalogue. 8 pages.
H510 HINDUSTAN (HMT) Interesting Indian Publication showing the manufacturing
process for their lathes. 26 pages.
H510a HINDUSTAN (HMT) Size 2 Milling Machine: Sales and Technical Specification
Catalogue. 4 pages.
H510b HINDUSTAN (HMT) H22 and H26 Lathes. Sales and Technical Specification
Catalogue. 6 pages.
H510c HINDUSTAN (HMT) Radial Arm Drills Types RM60, RM61, RM62, RM63 and RM65. Sales and Technical Specification
Catalogue. 6 pages.
H530 HISPANO SUIZA HSS-102 Tool and Cutter Grinder. Detailed Sales and
Technical Specification and Accessories Catalogue. 16 pages.
H530A HISPANO SUIZA "RIGHI" Production Lathe. Sales and Technical
Specification Catalogue with work examples. 10 pages.
H571 HITACHI Medium Type No. 2 ML Milling Machines: Detailed and well-illustrated Sales and
Technical Specification Catalogue. 28 pages.
H571A HITACHI Medium Type No. 2 M Milling Machines: Detailed and Well-illustrated Sales and
Technical Specification Catalogue. 28 pages.
H575 HIW Rochling Drilling Machines. All-models Sales and Technical Specification Catalogues showing the bench, vertical and horizontal Models B72ET, B74ET, B72ES, B74ES, B76AK, B74A, B74AST, B74AR, B74AT, B74AS, B74AST,
B76A, B76AST, B76AS, B76AS, B76AR, BE10K, B75, B76, and B78. A mixture of Germa, French and English texts.
H578 HJ Slotting Machine. Sales and Technical Specification Catalogue. 4 pages.
H674 HJORTH (USA) Precision Bench Lathe Beautifully illustrated Catalogue No 5
60 pages.
H677 HJORTH (USA) Precision Bench Lathe Catalogue No. 12 with even more unusual
and interesting lathe accessories. 60 pages.
H678 HOBSON H7 Geared-head Lathe. Sales Sheets. 6 pages.
H678-HOFF HOFFMAN Dividing Heads Sales & Specification catalogue showing the DTH, HTH,
HTH(A), UTH, HG, HTG, TSH-100, D, MT-125/3, Z, ZT, VTS, VTS+BV, VTSA-200, HMTH,
UMTH, UMTHS, MTS, ABS, ABL, EMT-100/1, EMT-150/2, EMT-160/1, EMT-180/3,
ETW/125-5, ETW/125-2, ETW, SETW/125, DT, DT(A), HTHD, ANC-240, NCT, HTH/NC,
STH-Round, STH-Square, RH-10, RHI, RDI, WR, HPR/M, HPRS/M, RMDSUP, EMS,
HDR (A,B,C), HDRM, WHDR, HPRD(A), HPRD(B), HPRSD(A), HPRSD(B), HPRSD(C),
HPRSD(D), HPRSD(D), RNC, WRNC, HPR(NC), WHPR/NC,HPRS/NC and WRMH
H679 HOGBO (Sweden) Bench Milling Machine: Sales and Technical Specification
Catalogue. In Swedish or English. 4 pages.
H680 HOLBROOK Precision Bench Lathe 31/2" x 32" (bed): Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue No. 3,
1922. 16 pages.
H680CB HOLBROOK Precision Lathe 4" centre height Model CB No.8 with electronically variable-speed control. Sales and Technical
Specification Catalogue. 4 pages.
H680A HOLBROOK Model 5P. 5 inch Centre by 5-foot bed Precision Plain-turning
lathe.Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 4 pages.
H680B HOLBROOK 6 C.S.C., 6 S.C., 6S.C.2, 6M and 6 inch motor-driven gap-bed
Lathes and Attachments. Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue No. 6, 1919.
Shows the 6 inch Centre by 6 foot bed Standard Engine Lathes: 12 pages.
H680C HOLBROOK Models 6C and 7 T.B. Toolroom Lathes: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue No. 7, 1920. Shows the
6-inch by 5 foot lathes and accessories. 16 pages.
H680D HOLBROOK General Purpose Lathes and Equipment Models G-13, G-15 and
G-17: Well illustrated and detailed Sales and Technical Specification
Catalogue No. 6, 1931/38. Includes full details of both flat-belt drive and
geared-headstock models together with screwcutting charts, how to use the DTI
and installation instructions. 28 pages.
H680E Holbrook Model A Lathe: Well illustrated and detailed Sales and
Technical Specification and Accessories Catalogue. 4 pages.
H680F Holbrook Model Toolroom Lathes and Equipment. Catalogue No. 7 (1934-7
Edition). Well illustrated and detailed covering the High Precision bench-mount
and stand-mounted Model B No. 8, Model B No. 9 flat-belt drive lathes and the
Model T Nos. 13, 15 and 17 with flat-belt and geared headstocks. An
interesting and detailed publication covering specifications, features and
accessories from the 1930s to the early 1950s: Includes full screwcutting
charts and some perfunctory operating instructions. 60 pages.
H680G Holbrook Model B Lathes: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue showing the 13, 17 and 21-inch swing Models (Types 13, 17 and 21). Includes screwcutting charts and a comprehensive guide
to screwcutting. 24 pages. .
H680H Holbrook Model C Lathes: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue showing the Models Nos. 10, 13 and 16. Covers, with a supplement,
both roller bearing and plain-headstock models. Includes a comprehensive guide
to screwcutting. 25 pages. .
H680J Holbrook Model D Lathes. Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 24 pages.
H680K
Holbrook General-purpose Gap-bed Lathes Model G Lathes Nos. 13, 15 and 17: Well illustrated and detailed Full-range Catalogue No.6 dated 1931.
H680L Holbrook Model H Lathes. Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 10 pages.
H680M Holbrook Model R Relieving Lathes No. 4 and No. 9: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 12 pages. .
H680N Holbrook Model T Lathes Nos. 13, 15 and 17: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 16 pages. .
H680P Holbrook Model U No. 17 Precision Tool-Makers' lathe: Well illustrated and detailed Sales, Accessories and Technical
Specification Catalogue. 25 pages. .
H680R Holbrook "Minor" 5" x 20" Toolroom lathe 1960s. Sales
and Technical Specification Catalogue. 6 pages.
H680S Holbrook "Major" Toolroom lathe 1960s. Sales and Technical
Specification Catalogue. 6 pages.
H684 Holke FV-10 (FV10) Universal Ram-head Milling Machine. Sales, Technical-Specification and Accessories Catalogue. English and German Text. 6 pages.
H684A Holke F6-V, F7-V, F8-V, F10-V, F11-V, Super F12-V, F13, F13-V, F14-P, F15-CNC and CNC-1 Milling Machines. Sales and Technical-Specification Catalogue.
English Text. 8 pages.
H688 Hollingworth (U.S.A.) Model L Lathe. Sales and Specification Catalogue. 4 pages
H688 Hollingworth (U.S.A.) Shapers in 16, 18, 21 and 24-inch strokes. Sales
and Specification Catalogue. 4 pages
H695 HOLROYD 1895 Catalogue with Lathes, Milling Machines, Drilling Machines, Grinding Machines,Cutter Grinder, Dividing Heads, Profiling Machine and Grinders. 39 Pages.
H699A HOMMEL UWG1 Universal Machine Tool. Sales and Technical Specification
Catalogue. German text. 21 pages.
H699B HOMMEL UWG2 Universal Machine Tool. Sales and Technical Specification
Catalogues. Four Editions, all with German text. 52 pages.
H720 HORDERN, MASON and EDWARDS Ltd. Wonderful Catalogue of Power Presses, Sheet Metal Machines, Spinning, Trimming and Wiring Lathes. 121 pages.
H750 HPC GRS-30, GRV-553 and GRV-54 Radial Drilling Machines (made by Zaklady
Przemyslu Metalowego in Poland) . Sales and Technical Specification
Catalogue. 26 pages.
H780 Hultsfreds Mekaniska Verkstad (HMV) Thread Cutting Machines Types OH and OS. Sales and Technical Specification Catalogue. 4 pages
H800 Humpage, Thompson and Hardy: Gear Hobbing Sales and Technical Specification Catalogue and basic Operating Instructions. 8 pages.
H810 HUNT (England) Surface Grinder Sales and Technical Specification
Catalogue. 4 pages.
H810A Hunt (also branded Curchill) Drill Grinders. A Sales and Technical Specification Catalogue Data Set covering the Models DG100 (3 detailed editions),DG50, DG2A/2, DG1S/2,
Model 2 Automatic and the Hunt Tap & Die Grinding Machines Models 10 TG, 11 TG and No.12. 28 pages.
H820 HURON (HURE) Milling Machines 1973 100th Year Anniversary Catalogue. 8
pages.
H820A HURON (HURE) MILLING MACHINES:
Wonderful 158-page Catalogue showing the full range of millers and Accessories
as current through the 1950s to 1970s. Models include: "N",
"M", "NU", "MU", "MVC",
"MVCAO", "MVP", "MVPCNP", "MVPCNC",
"MVGVCNP", "MVGVCNC", "MH", "MVR",
"MUR", "MUCNP", "MUCNC", "MHCNP",
"MHCNC", "MHR", "LR", "2-LUR",
"L", "P", "PU", "PUCNP",
"PUCNC", "R" and "RU". Many explanatory drawings
accompany each entry and there are copious photographs and explanations of
difficult and complex jobs being set up and machined. Complete details are
given of the many heads: universal, right-angle, sensitive drilling, extension,
production, sliding, sliding spindle, automatic-feed and slotting heads - as
well as all the other many attachments and options.
H820B HURON (HURE) MILLING MACHINES: Wonderful 100-page Catalogue showing the
full range of millers and Accessories as current through the 1940s to 1950s.
machines include: "K", "KU", "KVC", KVCAO",
"KVP", "KH", "KVR", "KUR",
"KHR", "LR", 2-LUR", and "L". Many
explanatory drawings accompany each entry and there are copious photographs and
explanations of difficult and complex jobs being set up and machined. Complete
details are given of the many heads: universal, right-angle, sensitive
drilling, extension, production, sliding, sliding spindle, automatic-feed and
slotting heads - as well as all the other many attachments and options.
H820C Huron (Hure) Lathe. Sales and Technical Specification Catalogue. 4
pages.
H820D Hure (Huron) Universal Milling Machine Catalogue circa 1920s. A very rare
but comprehensive Sales and Technical Specification Catalogue that includes
dividing attachments, the full milling machine accessories range and a Hure
lathe. 80 pages (first 2 missing).
H820E Hure (P.Hure) Conseils Pratiques pour l'utilisation des Machines a Fraiser Universelles. 1952.
175 pages d'informations détaillées sur les premiers types de fraiseuses Hure. Generalites et descriptions, Manutention.
Installation. Mise en route. Entretien. Securites. Blocages. Reglages. Facteurs influant sur la qualite du fraisage.Accessories porte-peices
autres que les poupees diviseurs. Diviseurs et poupees diviseurs. Etude theorique detaillee des poupees diviseurs. Tetes et Appareils accessories.
Notions sur les Engrenages et leur raille. Taillage des Cames. Exemples de Fraisage.
(175 pages of detailed information on the early types of Hure Milling Machines)
H820F Hure Fraiseuses Universelles - a tete universelle et broche orientable. Un catalogue détaillé de 16 pages en français qui explique la construction
et le fonctionnement de ces fraiseuses remarquablement polyvalentes. Contient des dessins en coupe des différentes têtes
(et de leurs accessoires) avec des explications et des photographies montrant comment elles sont utilisées pour une variété d'opérations d'usinage compliquées.
H820G Hure Milling Machines Types 401AN and 402AN. Sales and Technical Specification Catalogue. 8 pages
H820H Hure Milling Machine Typem 96N Sales and Technical Specification Catalogue. 16 pages.
H825
Hurth V10a Precision Toolroom Boring, Milling and Jig Boring Machine.
Well-illustrated and detailed Sales & Technical Specification Catalogue. 20 pages.
H825A
HURTH KF32 and KF32A Milling Machines. Detailed and well-illustrated Sales, Technical Specification & Accessories
Catalogues. 32 Pages.
H825B
HURTH LF32a Automatic Keyway Cutting Machine. Detailed and well-illustrated Sales, Technical Specification & Accessories
Catalogues. 16 Pages.
H825B
HURTH LF32a Automatic Keyway Cutting Machine. Detailed and well-illustrated Sales, Technical Specification & Accessories
Catalogues. 16 Pages.
H825C
HURTH Gear Hobber WF10. Detailed and very well-illustrated Sales, Technical Specification & Accessories Catalogue. 18 Pages.
H826 Huvema HU760 and HU920 Lathes. Sales & Technical Specification Catalogue. English, Dutch and German text. 2 pages.
H828 HYDRO Precision Second-Operation Lathe. Sales and Technical Specification Catalogue. 7 pages.
H830 HYDRATROL (Lehmann) Lathes Sales and Technical Specification Catalogue.
15 pages.
H900 Ideal Lathes - see under Willimott.
I005A IKEGAI Model A-20 Lathe. Detailed and Well-illustrated Sales and
Technical Specification Catalogue. 36 pages.
I005AA IKEGAI Model DA Lathe (DA-25, DA-35 and DA-45). Two Detailed and
very well-illustrated Sales, Technical Specification and Accessories Catalogues that cover from Early to late Models. 48 pages.
I005B IKEGAI Model ANC36 Numerically Controlled Lathe. Detailed and
Well-illustrated Sales and Technical Specification Catalogue. 22 pages.
I005C IKEGAI Model ANC20 Numerically Controlled Lathe. Detailed and
Well-illustrated Sales and Technical Specification Catalogue. 16 pages.
I005D IKEGAI DA-80T Horizontal Boring and Milling Machine. Sales and
Technical Specification Catalogue. 4 pages.
I005E IKEGAI Company History and "Factory Tour". An outline from 1889 to 1965 of the Company's factory sites,
details of the various technical departments including research and development, NC Department,
headstock assembly plant, lathe assembly lines, heavy-duty machine tool assembly shop and products
including printing presses, lathes, diesel engines, strapping machines, vulcanizers and castings, etc. 28 pages.
I10 IME Watchmakers' Lathes and Drills: Traditional and later Types (Models
100 and 300). A complete Data Pack with copies of all known Sales and
Technical Specification and Promotional literature. 20 pages.
I15 IMOR 8-inch lathe Sales and Technical Specification catalogue. 2 pages.
I60 IMPERIA M6-A and M6-AR Tool and Cutter Grinder - Das Werkzeugschleifen - L'Affutage. Detailed Sales, Technical
Specification and Accessories Catalogue. Ventes détaillées, technique
Spécifications et catalogue d'accessoires. Detaillierter Verkauf, Technik
Spezifikations- und Zubehörkatalog. English, French and German text. Useful annotated
pictures showing control systems with clear photographs of many and varied jobs
in place and accessories in use. 32 pages.
I70 IMPETUS (Metalmaster) Universal machine Tool. Sales and Technical
Specification Sheet (excellent illustrations) 3 pages + technical description.
I75 INCA Tour à bois Inca. Catalogue de vente, d'accessoires et de spécifications techniques. 4 pages. Texte en français.
I80 INDEX Automatic Lathes (Germany) 50-year celebration book showing, as it
was in the 1960s, the full extent of the works production processes. Includes a
well-illustrated factory tour and historical details. 104 pages
180A INDEX - Booklet "Building Index Automatic Lathes" A facinating, detailed, well-illustrated account of how
INDEX Automatic lathes were built during the 1950s from design, castings, machining the parts,
the machine tools used (including the Tornomat Polygonal) production set-ups, the lathes' various ingenious mechanisms, assembling, and testing, etc.
180B INDEX Automatic Lathes: "Production Parts" (i.e. The accessory
Range). 44 pages.
180C INDEX Automatic Lathes: "Production Examples" - showing the
types of job commonly undertaken and their set-ups. 44 pages.
180D INDEX Models 12 : 18 : 25 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 22 pages.
180E INDEX Models 24 : 36 : 52 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 212 pages.
180F INDEX Models B30, B42 and B60 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 22 pages.
180G INDEX Models B60F Automatic Chucking Machine Identical to the B30 : B42 :
B60 with the exception of the work spindle). Sales and Specification
Catalogue. Automatics: 14 pages.
180H INDEX Models C19 and C29 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 24 pages.
180J INDEX Model DG12 and DO12 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 8 pages.
180K INDEX Model ER26 and ER42 Automatic Lathes. Sales and Specification
Catalogue. Automatics: 16 pages.
180L INDEX Model GS42S-65-100, GSC42S-65-100. Sales and Specification
Catalogue. Automatics: 20 pages.
180M INDEX Model GU-610 CNC Automatic Lathes. Sales and Specification
Catalogue. Automatics: 8 pages.
180N INDEX Model OR12 Automatic Lathes. Sales and Specification Catalogue.
Automatics: 16 pages.
180P INDEX Model MS25 Automatic Lathes. Sales and Specification Catalogue.
Automatics: 28 pages.
180Q INDEX Model MS50 Automatic Lathes. Sales and Specification Catalogue.
Automatics: 8 pages.
180R INDEX Model ON Automatic Lathes. Sales and Specification Catalogue.
Automatics: 16 pages.
180S INDEX Automatics: General catalogue giving the Specification of the: ON,
Or, DG12, 12-18-25, C19, C29, B30, B42 and B60 machines. 8 pages
I80A INDEX Model 55 Milling Machine: Sales and Technical Specification
Catalogue. 4 pages.
I80B INDEX Model 60 Plain Horizontal Milling Machine: Sales and Technical
Specification Catalogue. 4 pages.
I80C INDEX Model 660 "Convert-a-Mill" Sales and Technical
Specification Catalogue. 4 pages.
I80D INDEX Model 555 vertical Milling Machine: Sales and Technical
Specification Catalogue. 4 pages.
I80E INDEX Model 645 Vertical Milling Machine: Sales and Technical
Specification Catalogue. 4 pages.
I100 INDUMA Miller Type 1/S, 1/S-CE and 1S-43. A collection of Detailed Sales and Technical Specification and
Accessories Catalogues that covers all known changes to these models. 40 pages.
I100A INDUMA Millers 2/U, 3/U, 4/U, 5/U, VR/3, VR/5 and PR-2/V3 Three detailed Sales and Technical Specification Catalogues showing both standard knee type and Motorised Overarm versions.
Sales and Technical Specification with, for the 4U and 5U sets of annotated pictures showing all the control systems 24 pages.
I100B INDUMA Universal Millers NL75 and NL87 Sales and Technical Specification Catalogue. English and German text. 20 pages.
I100C INDUMA Horizontal knee-type Universal Miller NL55 Sales and Technical Specification Catalogue. English and German text. 12 pages.
I100DD INDUMA Turret Millers 5S/60 and 5S/70 Sales and Technical Specification Catalogue. English, French and German text. 6 pages.
I100E INDUMA Turret Millers 4/S-A and 4/S-B Sales and Technical Specification Catalogue. English, French and German text. 6 pages.
I100F INDUMA Turret Miller 1S-43 Sales and Technical Specification Catalogue. 6 pages.
I100G INDUMA Turret Miller 1S-CE Sales and Technical Specification Catalogue English and German text. 6 pages.
I100H INDUMA Universal Miller NL-63 Sales and Technical Specification Catalogues. Two editions, one with 20 pages in English German
the other, a suppliment, with 3 pages giving the complere specification in English, French, German and Spanish.
I100J INDUMA Vertical Millers VR2 and VR5 Sales and Technical Specification Catalogue English and German text. 10 pages.
I100K INDUMA Millers Series MM Universal, Universal with Powered Overarm Models MM-100, MM-200,
MM-300 and MM-400 Sales and Technical Specification Catalogue with English and Italian text. 6 pages.
I100L INDUMA Millers Series MBM Sales and Technical Specification Catalogue for the Models MBM-20, MBM-25 and MBM-30 with English and Italian text 6 pages.
I100M INDUMA Millers NL/48 Sales and Technical Specification Catalogue with English and German text 12 pages.
I100N INDUMA Millers NL/49 and VM49 Sales and Technical Specification Catalogue with English and German text 12 pages.
I100P INDUMA Miller NL/50 Sales and Technical Specification Catalogue with English, French, Italian and German text 4 pages.
I100Q INDUMA Millers NL/51 Sales and Technical Specification Catalogue with English and German text 12 pages.
I100R INDUMA Miller NL/87 Sales and Technical Specification Catalogue with English, German, Italian and French text. 4 pages.
I100S INDUMA Millers VM60, VM70 and VM90 Sales and Technical Specification Catalogue with English and German text 20 pages.
I100T INDUMA Miller 51t3S 3 machines in one, 3 Fresatrici in una, Fraiseuses et une seule, Frasmaschinen in einer. Sales and Technical Specification Catalogue with English, French. Italian and German text 8 pages.
I100U INDUMA Miller 3-S Sales and Technical Specification Catalogue with English, French. Italian and German text. 4 pages
I100V INDUMA Miller 5S. 5S-60 and 5S-70 Sales and Technical Specification Catalogue with English, French. Italian and German text. 6 pages
I100W INDUMA Miller NL/56 Sales and Technical Specification Catalogue with English and German text. 16 pages
I100X INDUMA Miller 1S/44 Sales and Technical Specification Catalogue with English, French Italian and German text. 4 pages
I100Y INDUMA Miller UR/3 Sales and Technical Specification Catalogue with English text. 8 pages
I100Z INDUMA Miller 20/40 Sales and Technical Specification Catalogue with English and Italian text. 16 pages
I200 I200D INGERS (Incontrera and Wenninger) "UNIMILLA" General Sales & Specification Catalogue showing the Lathes Types Super 153, Toolroom 175, 200/N, 225 and 305.
Milling machines V3, Profilross Hydraulic Copy Miller, Inger Universals Sizes 1,2 and 3 and their optional Motorised Overarm.
Universal Grinding MachinesRU100 and RU600. Shaping Machines Models 460, 550, 680, 750 and 900. Universal Dividing Heads Types O.M.B.110, O.M.B.120, O.M.B.140 and Rotary tables Types T.D. 200,
T.D.250, T.D.300 and T.D.350. 8 Pages.
I200A INGERS (Incontrera and Wenninger) V3 Milling Machine. Sales and Technical
Specification Catalogue. 8 pages.
I200B INGERS (Incontrera and Wenninger) "Super Ingers R.U. 1000"
Grinder. Sales and Technical Specification Catalogue. 8 pages.
I200C INGERS (Incontrera and Wenninger) "UNIMILLA" Toolmaker's Universal Turret Milling Machine. Sales and Technical Specification Catalogue. 4 pages
I250 INGERSOL Automatic Cutter Grinder. Detailed Sales & Technical Specification & Accessories Catalogue with clear details of how the machine functions and its various possibilities. 26 pages.
I300 INVICTA Shaper Sales, Accessories and Technical
Specifications Catalogues. A complete data pack that Illustrates and describes
the constructional features of the range from the No.2 to the No. 30. 20
well-illustrated pages. Several editions included: an early edition originally
issued as a bound copy; an edition issued as a set of loose sales sheet; a
publication showing the 18", 24" and 30" "Major" Types
and three additional publications featuring the later Elliot-badged M, MR and
S-Series Machines and a number of the Elliott/Alba machines made in the same
factory. 68 pages.
I900 IXL Lathes. Sales and Technical Specification
catalogue showing the most common models: 5-inch Model W3 (with bar-braced
headstock), Model A.K.T. and Model A. 4 pages.
J3 JACKSON Machine Tool Co. (Jackson, Michigan, USA) No.5 and No.6 "Duplex Typeless" Die Sinkers Catalog. 26 pages.
J5 JACOB (Georg Jacob) Watchmakers' Lathes Catalogue Circa 1960s showing the Geneve-type models Nos. 15363, 15919, 16944
and their many variants and accessories. 8 pages. GERMAN TEXT.
J20 JARBE Milling Machines - All-models Catalogue 1976 showing the: F2, F3,
F4F2C, F3C and F4C. 28 pages.
J20A JARBE FP.1 Bed-type Milling Machine with rise-and-fall head. Sales and
Technical Specification Catalogue in Spanish with English translation of the
specification. 4 pages
J20B JARBE Grinding Machines Types RUA-600, RUA-1000, RUA-1500, RUA-300 and
RUA-4000. Sales and Technical Specification Catalogue in English and
German. 16 pages.
J40 JAFO JAROCIN Miller Model FWD32: Sales and Technical Specification
Catalogue. 4 pages.
J45 JASHONE M180 Lathe. Sales and Specification sheet. 2 pages.
J45 JASHONE M215E Lathe. Sales and Specification sheet. 2 pages.
J50 JASPAR Milling Machines Catalogue set for the Types 2CR, 3CR, 3MVS, 3VS, and the JASPAR-GARDIER 3MCB. 14 pages.
J50A JASPAR Milling machines. Small-format Catalogue showing the Type 2CR, Type
3CR, Type 3CS, Type 3MVs machine and vertical head and slotting attachments. 4
pages.
J55 JENNY Precision Toolmakers' Lathe. Sales, Specification and Accessories Catalogue. French Text. 6 pages.
J55A JENNY Precision Toolmakers, Second Operation and Turret Lathes. Detailed and well-illustrated Sales, Specification, Accessories
and price list Catalogue. English Text. 11 pages in total.
J60 JONES (USA) Machine Tools Built from Casting Kits. Maker's Catalogue. (See
the Manuals sections for the plans sets). 12 pages.
J65 Jones & Lamson Nos. 3, 4 and 5 Universal Turret Lathes. Detailed sales and Technical Specification Catalogue. 26 pages.
J70 Jones and Shipman Drilling Machines - early types. Two Catalogues showing drilling machines (swan neck, conventional, high-speed, precision and "ganged-up")
as made from the 1920s until the late 1930s. Well-illustrated and detailed pages showing not only the various models but details of their construction and accessories.
91 pages.£55
J70-8 Jones & Shipman High-precision, High-speed bench drills with enclosed belt drive. Models 8" Model 616 Coded "Minor"; the later 8" Model 816 (with an optional built-in light Code B) and the 14" (Major).
These drills had small build changes over the years and various speed ranges to order including 1400, 3,000 and 6,000 as standard and slower and faster options up to 10,000 r.p.m.
The earliest types appear to come from the mid 1930s and the last from the 1950s. 6 pages.
J7002
Jones and Shipman Early Catalogue (1920s to 1930s) showing Tapping Machines, Twist Drill and Tool Grinders, Radial-arm Drills, Drilling Machines,
Standard and Tilting Work Tables, Machine Vices, Horizontal Drilling Machines, Multi-holder Drilling Heads, Centering Machine, Straightening Presses,
Mandrel Presses, Power & Worm Gear Presses, Bench Centres and the Model 610 Gear Shaping machine. 42 Pages.
J7003
Jones and Shipman Early Grinders. Two detailed and well-illustrated Catalogues showing the full range of both belt driven and integral electric
motor grinders and tool & cutter grinders as sold during the 1920s and 1930s.66 pages.
J70R JONES and SHIPMAN Full-range catalogue from the late 1930s and early
1940s showing a vast range of drills, Grinders, Drills, Tool and Cutter and Twist-drill Grinders, Cone
Grinders, Drills, Tapping Machines, Honing Machines, Lapping Machines, Slot
Millers, etc. 40 pages.
J70R2 JONES and SHIPMAN Full-range Grinder catalogue from the
1940s to 1950s. Covers the following models: AW, BW, CW, OH, PAW, HBY, HCY,
HDY, HBA, HBB, AC, UAC, NB, OSB, OSG, OSV, VXA, VL, AJB, AJW, DAJ, DAX, LQ,
LCP, DCH, DCY, CRM,C, D, F, BW, TG, VB, and VBA116 pages.
J70S JONES and SHIPMAN Unusual and detailed sales & Specification Catalogue that shows the entire range from the
late 1950s to the late 1960s. Includes precision grinders of all types, honing machines, general machine tools, accessories
and a 13-page addition titled "Machine Tools for Special Applications.
104 pages.
J70T JONES and SHIPMAN Grinder Catalogue (Circa 1939) Models: 271, 562, 56A,
54A, 270, 542, 284 and accessories 30 pages.
J70U Jones and Shipman Complete Grinder Range Catalogue (1947) 28 pages.
J70V Jones and Shipman Grinder Catalogue (Circa 1956) Models: 1300, 1305
and 1310 33 pages.
J70V2 Jones and Shipman Machine Tools Full Range Catalogue (Dated 1967): 71 pages.
J70W Jones and Shipman Complete Grinder Range Catalogue (1984) 6 pages.
J70X "Jones and Shipman at Rolls Royce". Interesting,
well-illustrated Advertising Booklet 1962 19 pages.
J70Y Jones and Shipman 540 Surface Grinder: Catalogue 1971 11 pages.
J70Z Jones and Shipman Surface Grinders: full-range Catalogue, 1984. 14
pages.
MJ520 Jones and Shipman 520 Miniature Precision
Cylindrical Grinder. There never was a manual for this model - but instead a
well-produced 8-page booklet plus three extra sales sheets showing the extent
of the machine's capabilities.£16
J70AB Jones and Shipman 1600 Cone Lapping Machine. Sales and Specification Catalogue. 2 Pages.
J75 JOTES "Tacchell" Universal Tool & Cutter Grinders 4-M and 4-AM. Detailed Sales,
Accessories and Technical Specification Catalogue.Not a manual, but almost as
useful. 32 detailed and well-illustrated pages with details of the machine's
construction, controls, lubrication system, how the many accessories are mounted
and used and showing many typical tool and cutter grinding jobs.
J75A Jotes SPC-20 Surface Grinder. Sales, Technical Specification and Accessories Catalogue with annotated control pictures. Not a manual, but almost as useful. 18 pages
J80 JOWETT Thread Milling and Hobbing Lathe. Sales and Technical
Specification Catalogue. 8 pages.
J100 JUARISTI R2000 Cylindrical Grinder. Sales and Technical Specification
Catalogue. 6 pages.
J100A JUARISTI R2000 Cylindrical Grinder. Sales and Technical Specification
Catalogue. 6 pages.
J100B JUARISTI MDR-55 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 4 pages.
J100C JUARISTI MDR-60 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 8 pages.
J100D JUARISTI MDR-65 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 4 pages.
J100E JUARISTI MDR-70 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 4 pages.
J100F JUARISTI MDR-90 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 6 pages.
J100G JUARISTI MDR-110 Horizontal Boring Machine. Sales and Technical
Specification Catalogue. 2 pages.
J150F JUNG Internal Grinding Machines: Sales and Technical Specification
Catalogue for the Models BS7, BS14 and BS22. 8 pages.
J150G JUNG Internal and Automatic Internal Grinding Machines: Detailed and well-illustrated Sales and Technical Specification
Catalogue for the Models C8, CM8, C30, D7, D14, and D22. 38 pages.
J150H JUNG Model F Surface Grinder. Detailed and well-illustrated Sales and Technical Specification
Catalogue 23 pages.
J200 JUNGER VF-600 Vertical Milling Machine (Sweden). Sales and Accessories
Catalogue. 8 pages.
J200A Jungner Tool & Cutter Grinders a 4-set Catalogue Collection including one for all the many accessories and the Relief Grinding and Profile Grinding to Template.
Not a manual but almost as useful being profusely illustrated with many examples of typical set-ups illustrated and described.
Covers the models: UTG-8, UTG-14, US-21, US-305, US-2305 and the UTG-214 42 pages.
Kamph Tool & Cutter Grinder S 1V (Model S No.4). Sales & Technical Specification Catalogue. Included an annotated picture that explains the operation of the controls. 4 pages.
K20A
Kamph FK1 Die & Mould Copy Milling Machine. Sales & Technical Specification Catalogue. 6 pages.
K50 KARAT Model E2N Precision Lathe. Sales and Technical Specification
Catalogue. 2 pages.
K100 KARGAR (Germany) Lathes, millers, drills etc. Full-range Catalogue circa
1919/ 80 pages.
K200 - Many Kearney and Trecker catalogues available.
email tony@lathes.co.uk or phone 01298-871633 for details.
K200A Kearney and Trecker "Milwaukee" Milling Machines. Detailed All-models catalog No.21 Circa 1920s (Probably 1921). Contains detailed
descriptions of design and constructional details including the Column, Knee, Saddle and Table, Overams, Arm Braces, Spindles, Lubrication, Drive systems,
Table-feed systems, Vertical, Slotting and Universal Attachments, Rotary tables, Rack-cutting Attachments, Vises and Chucks, Tooling and safety Considerations.
Models shown include the Horizontal 1 1/2A, 2A, 1B, 1 1/2B, 2B, 2 1/2B, 3B. 84 pages.
K200B KEARNEY and TRECKER 2CE and 3CE Milling Machines. Detailed and well-illustrated Sales, Technical Specification and Accessories Catalogue. 28 pages.
K200C KEARNEY and TRECKER TF Series Milling Machines. Detailed and well-illustrated Sales, Technical Specification and Accessories
Catalogue showing Models 210, 220, 310, 315, 320, 330, 415, 425, 430, 450, 525, 550, 625 and 650. 20 pages.
K200D KEARNEY and TRECKER S Series Milling Machines. Detailed and well-illustrated Sales, Technical Specification and Accessories
Catalogue. Shows the Models 307 S-12 Plain, 415 S-15 Plain, 310 S-15 Universal, 415 S-15 Universal, 205 S-12 Vertical, 415 S-15 Vertical,
415 S-15 Plain Ram-type and the 205 S-12 Plain Ram Type. 48 pages.
K200E KEARNEY and TRECKER C-12 Knee Type Milling Machines Plain Horizontal, Universal Horizontal and Vertical. Detailed and well-illustrated Sales,
Technical Specification and Accessories Catalogue. 12 Pages.
K200F Kearney and Trecker Milwaukee-Matic Turn-12 Machining Centre. Detailed and well-illustrated Sales, Technical Specification and Accessories Catalogue.
24 pages.
K200G Kearney and Trecker "Milwaukee-Matic" The World's Widest Range of NC Controlled Machining Centres. Interesting 1970 Catalogue explaining Kearney & Trecker's
development of early NC-controlled Machines with details of the Ea, Eb, Model 2, Model 3, 3B and Turn 12.
K200H Kearney and Trecker Milwaukee-Matic Machining Centres Models Ea, Eb, Series 3B and H60. Four Detailed and well-illustrated Sales, Technical Specification and
Accessories Catalogues. 60 pages.
K200J Kearney and Tercker Milwaukee Milwaukee-Matic Modu-Line Machining Centre. Detailed and well-illustrated Sales,
Technical Specification and Accessories Catalogue. 22 pages.
K200C Kearney and Trecker "Milwaukee-Matic" The World's Widest Range of NC Controlled Machining Centres. Interesting 1970 Catalogue explaining Kearney & Trecker's
development of early NC-controlled Machines with detals of the Ea, Eb, Model 2, Model 3, 3B and Turn 12.
MK172Q Kearney and Trecker Series 1000 and 2000 Bed-type Production Milling Machines.
Detailed 42-page Sales & Technical Specification Catalogue with annotated control diagrams and clear explanations of how the machines function.
K179 Kearns No. 0 Horizontal Borer. Two detailed and well-illustrated Sales
and technical Specification catalogues covering machines from the 1920s to
the 1960s. 46 pages.
K179A Kearns No. 1 Horizontal Borer, early model. Detailed
and well-illustrated Sales and technical Specification catalogue. 20 pages.
K179B Kearns Nos. 2 and 3 Horizontal Borers. Detailed and
well-illustrated Sales and technical Specification catalogue. 32 pages.
K179C Kearns No. 4 and No.5 Horizontal Borers. Detailed and
well-illustrated Sales and technical Specification catalogue. 44 pages.
K179D Kearns All-Models Sales and Specification Catalogue
covering the Standard and Special Models: "S", 0, 1, 2, 3, 4, 5 and
6. 44 pages.
K180 Kearns "Magazine" In the 1960s Kearns
produced two very interesting booklets "A Magazine produced in the
interests of improved efficiency". Both offer fascinating insights into
the company, its structure, products, technical developments and sales
activities. 32 pages in total.
K180A Kearns Equipment and Attachments. A detailed catalogue showing all the
many accessories available for Kearns borers. 66 pages.
K180AA KEARNS Surfacing, Boring, Milling, Drilling and Tapping Machines.
Early General Catalogue with wonderful illustrations showing the machines in
use. 16 pages.
K180B KEARNS "S Type" Horizontal Borer: Maker's (superb) Technical
Catalogue. Lots of very useful information on how a borer can be used. In
English, French and German. 76 pages.
K180C KEARNS Surfacing, Boring, Milling, Drilling and Tapping Machines.
Comprehensive Sales and Technical Specification Catalogue with full
specifications of the: S Type, No. 0 Standard and Toolroom, No. 1, No. 2, No.
3, No. 4, No. 5, No. 6, 28 pages.
K180D KEARNS Borers and Planers. Comprehensive Full-Range Sales and Technical
Specification Catalogue showing the "S" Type, "S" Type
Optimetric, "45", "72", "450", "450A",
"450B", 450C", "450F", "451P",
"451F", "450PPT", "4551PPT", Electronic Model
"451PPT", "721P", the No.2, 3, 4 and 5. No. 4WB, No. 5WB,
and details of various control systems and accessories. 80 pages.
K180E KEARNS-RICHARDS SH75 Borer. Sales and Technical Specification
Catalogue. 18 pages.
K180F KEARNS-RICHARDS SF100 Borer. Sales and Technical Specification
Catalogue. 24 pages.
K180G KEARNS-RICHARDS SE125 and SE150 Borers. Sales and Technical
Specification Catalogue. 12 pages.
K180H KEARNS-RICHARDS SF125 Borer. Sales and Technical Specification
Catalogue. 24 pages.
K180J KEARNS-RICHARDS SJ100 Borer. Sales and Technical Specification
Catalogue. 22 pages.
K180K KEARNS-RICHARDS SF125L and SF125H Borer. Sales and Technical
Specification Catalogue. 4 pages.
K180L KEARNS 451 and 721 Horizontal Borers. Detailed Sales and Technical
Specification Catalogue. 40 pages.
KEIGHLEY MACHINE TOOLS - See under NEWALL
K190 KELLENBERGER Automatic Cylinder Grinding Machine and Crankshaft Grinding
Machine: Sales and Technical Specification Catalogue.
K195 KELLY SHAPERS - by The General Engineering & Mfg. Co. St. Louis MO USA. Two Sales, Technical Specification and Accessories Catalogues with sectional Drawings.10 pages.
K200 KEMPSMITH Milling Machine No. 4 Universal. Sales and Technical Specification
Catalogue. 12 pages.
K214 KENDALL and GENT Full-range Catalogue. 186 superbly-illustrated pages.
Shows: Millers, Plano Milling machines, Milling Cutters, Cutter Grinding
machines, Nut Tapping Machines, Bolt and Tube Screwing Machines, Broaching
Machines, Horizontal Boring, Milling and tapping Machines, Special-purpose
Machines, etc.
K214A KENDALL and GENT PLANO MILLING MACHINES. Sales and Technical
Specification Catalogue. 28 pages.
K214B KENDALL and GENT CVM-25 Vertical Milling Machine. Sales and Technical
Specification Catalogue. 8 pages.
K214C KENDALL and GENT CVM-40 Vertical Milling Machine. Sales and Technical
Specification Catalogue. 8 pages.
K214D KENDALL and GENT A.V.M.2 Vertical Milling Machine. Sales and
Technical Specification Catalogue. 2 pages.
K214E KENDALL and GENT "KENCO" Screwing Machines. Early Sales and
Technical Specification Catalogue. 8 pages.
K214F KENDALL and GENT "KENCO" Screwing Machines. Late Sales and
Technical Specification Catalogue. 6 pages.
K250 KENNEDY Miniature HACKSAW. Sales and Technical Specification Catalogues
with set-up instructions. 8 pages.
K250A KENNEDY BAR BENDING MACHINES Models 1149, 1212A, 1213, 2A and Cropping
Machines DCB1 and DCB4. Sales and Technical Specification Sheet. 2 PAGES.
K250B KENNEDY Bench Type Tube bending Machines Models 12 and 25. Sales and
Technical Specification Sheet. 4 pages.
K250C KENNEDY Bending Machines General Catalogue with Models 1212, 1213, 1149,
0, 1, 2, 2A, 3A Universal, 3A Major, No. 4, No. 12, No. 16, No. 20, 10 pages.
K250D KENNEDY Portable Bending Machines "Kwicky" PK2, PK3, EK2, PSB1,
PSB2, ESB1, MK2, MK3, MEK2, MSB1, MSB2, MESB1. 4 pages.
K250E KENNEDY Bending Machines Older General Catalogue (1929) with Models 1, 2,
2-geared, 2a special, 3, 3A, 12 and 16. 16 pages.
K250F KENNEDY Bending Machines Older General Catalogue with Models 1, 2, 12,
1212, 1213, 1149, 1425 electric. 8 pages.
K316A KERRY Lathe Type AG: Sales and Technical Specification Catalogue Model
A.G. Early edition circa 1950. 4 pages.
K316B KERRY Lathe Type A.G. Sales and Technical Specification Catalogue.
1952. 4 pages. .
K316C KERRY Lathe Type A.G. Sales and Technical Specification Catalogue Model
circa 1955. 8 pages. .
K316D KERRY Lathe Type G.C. (slightly modified A.G.) Sales and Technical
Specification Catalogue Model 1957. 2 pages. .
K316E KERRY Lathe Type A.G. Sales and Technical Specification Catalogue Model
circa 1964. 2 pages. .
K316F KERRY Lathe Type A.G. Sales and Technical Specification Catalogue Model
circa 1960/61. 8 pages. .
K316G KERRY Lathe Type A.G. Sales and Technical Specification Catalogue Model
1963. 8 pages. .
K316H Kerry Lathe Mk.3 (All Models: 1124, 1140, 1324 and 1340) 11" and
13" swing: Catalogue 1967. 8 pages.
K316J Kerry Lathe Mk.3 (All Models: 1124, 1140, 1324 and 1340) 11" and
13" swing: Hydraulic-copying models. Catalogue 1967. 4 pages.
K316K Kerry Lathe Very early version Model BD with belt-drive headstock:
Catalogue 1952. 4 pages.
K316L Kerry Group - Kerry, Broadbent, Oldfield and Schofield, Qualters and
Smith: Sales and Technical Specification Catalogue 1961. 47 pages.
K316M Kerry Super 8 eight-speed backgeared Drill, Sales and Technical Specification Catalogue. 8 pages.
K316M Kerry DRILLMASTER Drilling Machine (the one with the extended tube at the front of the belt cover and a round badge on the front).
A catalogue collection of 6 pages showing all versions of this useful drill with 5 inches of spindle travel: bench, column,
box-column and round and rectangular tables.
K418 KITCHEN and WADE Universal Machine Tool (combined lathe, shaper, miller,
drill and hacksaw) 4 pages.
K418A Kitchen and Wade and foundation drawings. 10 pages
K418B Kitchen and Wade E33 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details, useful annotated
pictures and foundation drawings. 10 pages
K418C Kitchen and Wade Structural and Plate Drilling Machines: Sales and
Technical Specification Catalogue. 20 pages
K418D Kitchen and Wade Full-range Catalogue showing Drills, Boring, Tapping
and Honing Machines. 57 pages
K418E Kitchen and Walker T2 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details, useful annotated
pictures and foundation drawings. 6 pages
K418F Kitchen and Walker E24 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details, useful annotated
pictures and foundation drawings. 6 pages
K418G Kitchen and Walker E3 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details and useful annotated
pictures. 4 pages
K418H Kitchen and Walker E4 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details and useful annotated
pictures. 4 pages
K418J Kitchen and Walker E5 Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details and useful annotated
pictures. 4 pages
K418K Kitchen and Walker E27A Radial-arm Drill: Sales and Technical
Specification Catalogue. Includes some operational details and useful annotated
pictures. 4 pages
K430 KLOB Opco 70 Optical Jig Borer. Detailed Sales and Technical Specification Catalogue. 16 pages.
K450 KLOPP Milling Machines: FW1100, FW1300, FWSU1300 Sales, Technical Specification and Accessories Catalogue. 8 Pages.
K450C KLOPP Shapers and Slotters. Catalogue Collection including a 22-page Full Range, well illustrated and detailed Technical Specification and Accessories Catalogue showing the Shapers Models
375, 450, 550, 625, 725, 850 and the Vertical Slotters Types SK250, SK500 and SK700. Also Includes: 4-page Klopp Catalogue giving additional
technical background and data for the 650H, 850H and 1000H. Model 525, Shaper Technical Specification and Accessories Catalogue, 4 Pages.
Model 800 Shaper, Technical Specification and Accessories Catalogue. 4 Pages. Model 800 Shaper "New Design", Technical Specification and Accessories Catalogue. 4 Pages. 38 pages in all.
K520 KNELLER Combination Machine - lathe, miller. 8 pages.
K530 Koepfer "coupe de vitesse" - une visite d'usine montrant de nombreux aspects intéressants de la production. Bien illustré et écrit en français.
Koepfer Gear Cutting - a factory tour showing many interesting aspects of production. Well-illustrated and written in French with an English Translation. 40 pages.
K530A Koepfer Model 151 Universal Gear Hobbing and Worm Milling. Detailed and well-illustrated Sales and Technical Specification Catalogue. 8 pages.
K540 KOK Lathes (Dutch). Sales and Technical Specification Catalogue for the
7-inch centre height (180mm) model. 4 pages.
K625 K.O.Lee Tool and Cutter Grinders. Sales and Technical Specification
Catalogue 1956 showing Models: BA800, BA803, BA804, BA860 and the full
Accessory Range and Price Lists. 16 pages.
K625A K.O.Lee Tool and Cutter Grinders. Sales and Technical Specification
Catalogue 1961 showing Models: BA900, BA960 and the full Accessory Range
and Price Lists. 16 pages.
K625B K.O.Lee Tool and Cutter Grinders. Sales and Technical Specification
Catalogue 1964 showing Models: B2060, BA960, B360, B300, BA900, B2000 and the
full Accessory Range and Price Lists. 20 pages.
K627 KOLLMANN Plano Milling Machines. Detailed and interesting full-range Sales and Technical Specification Catalogue covering Models
M30, M31, M32, MV32, M33, M34, M40, M41, M42, MV42 M50, M52, MV52, DFF350, MB Series, MBV Series, MC Series, MF Series, MFV Series,
MBV Series, MCV Series, VF5, VF5s, VF6, VF6s, VF5B, VF6B, SF and HZF, etc. 50 pages.
K627A KOLLMANN Plano-Milling Machines. Catalogue with many interesting details covering the making these large machines.
Gives details of the Series M, Series MA, Series MB, Series MBV, Series MC, Series MCV, Series ME, Series MF, Series MFV, Series MV,
Series MD, Series MG, Series MGV, Series EMA, Series EMAV, Series MAV. 32 pages.
K880 KONDIA FV-1 Turret Milling Machine. Sales and Technical Specification
Catalogue. 8 pages.
K900 KOPINGS S12A Lathe. Sales, Accessories and Technical Specification
Catalogue. 8 pages.
K900A KOPINGS Lathes S8SA, S8SAG, S10SA, S10SAG: Sales and Technical
Specification Catalogue. 10 pages.
K950 KUHLMANN Engraving Machines Models GM 1-1, GM 1-2 and GM 0-U. Sales and
Technical Specification Catalogue. 11 pages.
K950A KUHLMANN Precision Cutter Grinders ModelsSU2 and SL2. 6 pages.
K950B KUHLMANN Copy Milling Machines NF1 and NF 2. 10 pages.
K990 Kummer K20 Two-spindle Chucking Lathe. Detailed and Technically Informative Sales and Specification Catalogue. Two Editions. 32 pages.
L4 LABOR Types 210, 230 7 255 lathes. Sales and Technical Specification
Catalogue. 8 pages.
L5 Labher (Laborde Hnos S.A.) RA4 Universal Tool & Cutter Grinder : Afiladora Universal : Affuteuse Universell. Sales, Accessories and Technical Specification Catalogue. 8 pages.
L6 LABORMILL Universal Machine Tool: Sales and Technical Specification
Catalogue. 4 pages.
L8 LACFER CR-1 and CR-2-E Lathes. Two Sales and Technical Specification Catalogues. 8 pages.
L10 LAGUN Turret Millers. 2 Sales and Technical Specification Catalogues. 12
pages.
L15 LAMBERT (S.Lambert S.A. Switzerland) "Machines de Precision".
Wonderful Catalogue (with French text) of watch and clockmaking machines of every conceivable
variety: pivoting, milling, lathes, grinders, pinion and gear cutters, drills,
tappers, pivoting, , 67 pages. (the original copy of this book may be
available - phone: 012198-871633 to enquire)
L18 LANCING 20-inch and 24-inch lathes. Sales and Technical Specification
Catalogue. 6 pages.
LNC2 LANCO Watchmakers' Lathe Catalogue listing the 6 and 8 mm lathes, accessories and staking sets. 4 pages
LANDIS and LANDID LUND. We aslo have many Technical Specification Catalogues for
these machines. Please phone: 01298-871633 or e-mail your requirements to :tony@lathes.co.uk
L19 Landis Lund (John Lund Ltd) Precimax Cylindrical Grinders Models M.P.L., M.P.M., M.P.H. and M.P.J. All were of the same mechanical design
and appearance with swings of, respectively, 6.5", 8.5", 10.5" and 12.5". 12 pages
L19X Landis Lund Precimax a set of four detailed catalogues showing the Models MPA, MPB, MPO, MPH, MPL, UPH, UPJ, HUP, UK, RS20, RS25,
RS30, SP, SV, VRS, 2R, 3R, 2R Universal, 3R Universal, 3RH, 3RH, L19X
LANDIS Universal Grinding machines. Full-Range Catalogue
for 1922. 56 well-illustrated pages.
L20 LANDIS Type 1R Cylindrical Grinders and 1R Angular Wheelhead Plain
Grinder. Two Sales and Technical Specification Catalogues 30 pages.
L20A LANDIS Type 2R, 3R, 4R and 4RH Cylindrical Grinders.
Superbly-illustrated Sales and Technical Specification Catalogue. 61 pages.
L20B LANDIS Type 12R 7 14R Cylindrical Grinders. Superbly-illustrated Sales
and Technical Specification Catalogue. 36 pages.
L20C LANDIS Plunge-feed Cylindrical Grinders 2R, 4R and 5R.
"Supplementary" technical Catalogue detailing the Microtronic Feed
System, Lateral Locator, Automatic Work Rest, In-progress Gaging, Truform
Dresser Rotary Diamond Cutter Dresser, Automatic Lubrication, Work Loaders,
etc. 28 pages.
L20D LANDIS Type 5R Automatic Crankpin Grinder with MPC Microtronic Feed. Sales
and Technical Specification Catalogue 8 pages.
L20E LANDIS Type 5R-1W and 5R-1WEK Multiple-wheel Grinder and Multi-wheel
Pin Grinder. Superbly-illustrated Sales and Technical Specification Catalogue
21 pages.
L20F LANDIS Plunge-feed Cylindrical Grinders. Superbly-illustrated Sales and
Technical Specification Catalogue. 30 pages.
L20G LANDIS 2R-CNC Plain Cylindrical and Angular Wheelhead Grinders. Sales
and Technical Specification Catalogue. 8 pages.
L20H LANDIS 2R-CNC Plain Cylindrical and Angular Wheelhead Grinders. Sales
and Technical Specification Catalogue. 8 pages.
L20Z LANDIS 3SE-CNC Plain Grinder. Sales and Technical Specification
Catalogue. 12 pages.
L20Y LANDIS TRUFPRM DRESSER. Sales and Technical Specification Catalogue. 4
pages.
L30Z LANG Lathes and other Lang products - Full-range Catalogue circa late 1930s to early 1950s.
160 beautifully-illustrated pages showing all the various types of lathe - standard, toolroom,
boring and facing, production, capstan, Wickman, etc. with comprehensive screwcutting charts, clutch adjustment instructions,
details of how to use the Universal Relieving Attachment, , tooth-rounding machines, presses, pumps, clutches, etc.
L30 LANG Lathes. Superb early 1900s full-range Catalogue 135 pages.
L30A LANG Lathes. 12th edition Catalogue. Pre WW1. Superb early full-range Catalogue 122 pages.
L30B LANG Lathes. 1960 General Catalogue 24 pages.
L30C LANG "Electrofeed" Lathes. Two Sales and Technical Specification Catalogues Models 16D, 20D and 30CD. 10 pages.
L30D LANG Model A4 Lathe Sales and Technical Specification Catalogue. Superb Illustrations. 20 PAGES
L30E LANG "Boring and Surfacing Lathes" Sales and Technical Specification Catalogue circa 1935. 30 PAGES
L30F LANG "Junior" Lathes. Two well-illustrated and detailed Sales and Technical Specification Catalogues showing all three models. 9 pages.
L40 Lansing 20-inch and 24-inch Lathe. Sales, Technical Specification and Accessories Catalogue. 6 pages.
L60 Precisione di Lavorazione Meccanica e Aeronautica. Tornio Modello TPR-1. Catalogo con utili disegni in sezione, funzioni tipiche e accessori. 12 pagine.
L50 LEACH (USA) Hand-operated Surface Grinder No.11. Sales and Technical
Specification sheet. 2 pages
L50 LEACH (USA) Cylindrical Grinder. Sales and Technical Specification sheet.
1 page
L89 LeBlond a complete, superb quality full-range Catalogue dated 1921. Full of useful information and
detailed component pictures. Includes details of headstock gearbox, apron, tailstock, taper turning and countershaft designs,
the full range of normal engine lathes, special lathes for various industries, the 14 and 17-inch Rapid Production Models,
sliding bed models, production turret lathes, heavy triple-geared headstocks, crankshaft lathes, Multi-cut lathes,
portable engine lathes, milling machines, tool& cutter grinders and a wide range of accessories for all types. 131 pages.
L90 LeBlond: Complete Range Sales & Technical Specification Catalogue 1947. Includes Heavy Duty Geared Head Lathes
12", 14", 16", 18", 20", 25", 32", 40", and 50".
Tool Room Lathes 12", 14", 16", and 18".
Dual-Drive Lathe, Hollow Spindle Lathes 16", 18", 27", and 30".
Sliding Bed lathes 18"-38", 25"-50", and 32"-60".
Plain Gab-bed Lathes 12", 14", 16", 18", 20", 25". and 32".
Regal lathes all sizes.
Rapid Production Lathes 13", 17", and 20".
Automatic Lathes 12" and 16".
No.1 Crankshaft LATHEUniversal Crankshaft lathes 26" and 36".
Automatic Crankshaft Lathes 6AC, 1LB, DM, Pl and 9P
No.2 Tool & Cutter GrinderA. 20 pages.
L91 LeBlond: A superb, well-illustrated Complete Range Catalogue early 1950s showing lathes
as made from around 1946 to the late 1950s. Includes Heavy-duty Engine, Tool Room,
Dual Drive, Sliding Gap bed, Hollow Spindle, rapid production, Regal Models, Turret,
Automatic, Crankshaft, Universal Crankshaft, Important Features, Accessories, Attachments,
Drive Systems and the Cutter Grinder 103 pages.
L92 LeBlond "Dual Drive" Mk. 1 Lathe: Superb Catalogue with transparent
sheets that peel away to reveal details of the drive system. This unique catalog is sent on a pen drive as printing loses too much detail. 14 pages.
L93 LeBLOND REGAL Lathes. A wonderful, Full-range Technical Sales and
Technical Specification Catalogue and Price List 1931. This first-edition
publication introduces the new, lighter LeBlond lathes and is full of detailed
technical information, superb pictures, useful component-parts illustrations as
well as interesting company and factory information. 40 pages.
L94 LeBlond "Regal" 10-inch Accessory Catalogue 8 pages.
L95 LeBlond General Sales and Technical Specification Catalogue 1941 16
pages.
L96 LeBlond Multi-cut Lathe Catalogue 1920. Superb Illustrations. 34 pages.
L97 LeBlond Tool and Diemaker Lathe Sales and Technical Specification
Catalogue 1964. 4 pages.
L98 LeBlond 19-inch Regal Lathes Sales and Technical Specification Catalogue
1978. 20 pages.
L98TC LeBlond Tool & Cutter Grinder No. 2. Detailed and well-illustrated Sales, Accessories & Technical Specification Catalogue. 16 pages
L110 K.O.Lee Universal Tool Grinders. Sales, Technical Specification &
Accessories Catalogue.
20 detailed and well-illustrated pages showing the maker's
entire model range and all the accessories.
L115 Lees-Bradner Thread Miller Type HT. Detailed Sales and Technical Specification Catalogue 8 pages.
L120 LEHMANN "Hydratrol" Lathes Sales and Technical Specification
Catalogue 15 pages.
L200 LEINEN: Magnificent full-range Catalogue set (Catalogue No. D28E and two
others) showing the Precision Plain-turning, Screwcutting and Production
Lathes, their Accessories and Equipment as manufactured during the 1920s, 1930s
and early 1940s. Models included: A1, A1L, A2, B2, A3, B3, C3, D3, E3, A4, A3R,
C3R, D3R, E3R, A4R, FA3, FB3, FC3,FD3, FE3, FA4, FA3R, FC3R, FD3R, FE3R, FA4R,
A3P, B3P. C3P, D3P, E3P, A3RP, C3RP, D3RP, E3RP, A3PW, B3PW, C3PW, D3PW, E3PW,
A3RPW, C3RPW, D3RPW, E3RPW, A3G, B3G, C3G, D3G, A3RG, C3RG, D3RG, FA3G, FARG,
A3LZ, C3LZ, D3LZ, A2S, B2S, A3S, B3S, A3H, B3H, P3, P3S, P4S, N3, N4, N3H, N4H,
T3, T4, L4Rsu, K3n, L3n, L4Rn, L4Rs plus Stands and Accessories. 48 pages.
L200A LEINEN LZ4SB, MLZ4SB, LZ4S and MLZ4S (Late Models) Screwcutting and
Plain Lathes. Two Sales and Technical Specification Catalogues (one with
English text, the other German) with a separate, very detailed Accessories
Catalogue. 28 pages.
L200A2 LEINEN LZ4SB and MLZ4SB Screwcutting Lathes. Dedicated Accessories
Catalogue with German text. Covers everything offered for these models. 36
pages.
L200AY Leinen Model L Plain Lathes (all sizes).
Comprehensive and well-illustrated Accessories Catalogue. 16 pages.
L200AZ LEINEN Screwcutting DLZ-140, DLZ-190, DLZ-140s and
DLZ-190s. Detailed Sales and technical Specification Catalogue with
Accessories. 34 pages.
L200B Leinen ZL and ZK Series Lathes Sales and Technical
Specification Catalogue (No. Z333E) with Capacity, Alignment and Screwcutting
Charts. Models include: ZK3, ZK4, ZL4, ZK4k, ZL4k, ZK3u, ZK4u, ZL4u, ZKuk,
ZL4uk. 8 pages.
L200C Leinen Sort-bed lathes Models Sales and Technical Specification
Catalogue (No. Kw324E) . Models include: K, L, M, KW, LW, MW, KR, LR, MR, KA,
LA, MA, KAR, LAR, MAR, KH, LH, MH, KHR, LHR, MHR and Stands and
Accessories. 8 pages.
L200D Leinen Precision Capstan lathes. Detailed Sales and Technical
Specification Catalogues (No. SR347E showing Models SR15, SR20, SR26, VSR15 and
VSR26, Catalogue ER15/513/E showing Types ER15, ER15E and ER15V and Sales Sheet
RH showing the RH3 capstan. 16 pages.
L200E LEINEN WW Lathe: Sales and Technical Specification Catalogue 1960 (in
French) 7 pages.
L200F LEINEN WW Lathe: Sales and Technical Specification Catalogue 1961 (in
French) 19 pages.
L200G LEINEN WW-82 and WW-83 Precision Instrument and Watchmakers' Lathe. Sales
and Technical Specification Catalogue 4 pages.
L200H LEINEN "Reform" Lathe: Detailed Sales, Technical Specification
and Full-accessory Range Catalogue 1961 (in French) 20 pages.
L200J LEINEN WW Lathe Sales and Technical Specification Catalogue 1973. 6
pages.
L200K LEINEN "Optometrist" Contact Lens lathe. Sales and Technical
Specification Catalogue. 6 pages. English, French and German text.
L200L LEINEN FM1 Micro-precision Milling and Drilling Machine: Sales and
Technical Specification Catalogue 2 pages.
L201 LEINEN High Speed Precision Tapping Machines. Sales and Technical
Specification Catalogue. 8 pages.
L201A LEINEN Model BFL Precision Drilling and Milling Machine (built-in
rotary table model) Sales and Technical Specification Catalogue 2 pages.
US12
L235 LEINWEBER Universal Machine Tool - A remarkable combined Lathe, Vertical
and Horizontal Miller, Slotter, Shaper, Grinder. 10 pages.
L240 LEMPCO Model S Engine lathe. Sales and Technical Specification
Catalogue. 4 pages.
L280 LEOPOLDO PONTIGGIA NH-450 Lathes. Sales and Technical Specification
Catalogue. 12 pages.
L280A LEOPOLDO PONTIGGIA "Tiber" lathe. Sales and Technical
Specification Catalogue. 6 pages.
L280B LEOPOLDO PONTIGGIA General Catalogue giving the basic specifications for
following lathes: NH-450, NH-500, Nuovu SFE-600, SFE-700, SFE-800, PH-600,
PH-700, PH-800, UD-900, UD-1000,UD-1100, BS-500, BS-600, BS-700, FBA-2300,
F-80, F-80 SUPER, F-100 SUPER, TBF-75, RDF-75, TAM-95, TRR-1300/2T. 16 pages.
L290 LEPONT 16", 20", 24, 28, 34, 49, 48, 56 and 72-inch lathes. Sales and Technical
Specification Catalogues. 12 pages.
L300 Les Innovations Mecaniques T6 Lathe (Belgium) . Sales and Technical
Specification Catalogue. 4 pages.
L300A Les Innovations Mecaniques T7 Lathe. Sales and Technical Specification
Catalogue. 4 pages.
L300B Les Innovations Mecaniques T7 and T8 MC Lathes (Programmed Cycle
Control). Sales and Technical Specification Catalogue. 8 pages + 9-page
quotation from the UK agents.
L300C Les Innovations Mecaniques T7 AS Lathe Auto cycle control). Sales and
Technical Specification Catalogue. 8 pages.
S327
LESTO (SCINTILLA/Scinta/Lesto) Universal Precision lathe. Sales and
Technical Specification Catalogue. 21 pages.
L328
LEVIN (USA) Precision lathes: Full Lathe and Accessory Catalogue. Dated
1950. 32 pages.
L328A
LEVIN (USA) Precision lathes: Full Lathe and Accessory Catalog. Dated
1954. 36 pages. This is the first of the improved "glossy-photograph"
editions.
L328B
LEVIN (USA) Lathe Accessories, Heavy-duty Slide Rests, Circular Saws,
Collets, Turret Tooling, Micro Drilling, Micro Drills. Publication circa 1960.
12 pages.
L328C
LEVIN (USA) Price Lists: 1950, 1953 and 1958.12 pages.
L328D
LEVIN (USA) Precision Lathes, Drills and Accessories Sales and
Technical Specification Catalog 1963. 40 Pages.
L328E
LEVIN (USA) Precision Lathes, Accessories Technical Specification
Catalog with price lists 1972. 46 Pages. >
L328F LEVIN (USA) Precision Lathes, Drills and Accessories Sales and
Technical Specification Catalog 1973 through 1978. 31 Pages.
L328G All above Levin literature giving a complete picture of products from
1950 to 1980.
L330
LEWIS (USA) "Build Your Own machine Tools Catalogue" Illustrates
and describes all the machines offered by the Company: bench miller, dividing
centres, milling-machine arbor, shaper, hacksaw, bench vise, machine vise,
grinder, lathe turret attachment, drill press, floor drill, bandsaws, circular
saw, wood shaper, jointer(planer), wood lathe, countershaft unit, steam engine
and a gasoline engine. 31 pages.
L335
LEYTOOLS General Catalogue. A fascinating and detailed 16-page publication showing the extent of the company's products from simple hand-turned drilling machines to giant jigs, fixtures and servicing tools for the aircraft industry.
L335A
LEYTOOLS Precision Slotting Machines. Catalogue. 4 pages.
L338
Libby (International Machine Tool Corporation) Turret Lathes Types 1H, 2H and 3H. Sales and Technical Specification
Catalogue. 8 pages.
L340
LIDKOPING No. 2 Centreless Grinder. Sales and Technical Specification
Catalogue. 20 pages.
L340A
LIDKOPING No. 3B, 4B, 46 and 5B Centreless Grinders. Sales and Technical
Specification Catalogue. 20 pages.
L340Z
LIDKOPING Fine Boring Machine CL-21. Detailed Sales, Technical Specification & Accessories
Catalogue. 8 pages.
L345
LIEBER Heavy-duty Lathes two Sales & Technical Specification Catalogues: one in English showing the Types A, B, S and SS and
another in German showing the Types LP 00, LP 0, LP 1, LP 11, LP 111, LP 1V, LP V, LP V1, LP V11, LPS 0, LPS 1 and LPS 11. 30 Pages
L360 LIEBHERR L301 Gear Hobbing Machine. Detailed Sales and Technical
Specification Catalogue. 32 pages.
L362
LIECHTI "Universal" Lathes Type P Centre lathe, Type PR Turret Lathe and the Type PRT Drum-turret Lathe. Two detailed Sales & Technical Specification Catalogues 20 pages.
L365
LIMATIC Model C13 Filing and Sawing Machine. Sales & Specification Catalogue. 2 pages.
L368
LINDER LB14 and LB15A Jig Boring Machines. Detailed Sales, Specification & Accessories Catalogue. 26 pages
L370
LINLEY JIG BORER (USA) Early Model (narrow saddle) Sales Catalog 4 pages.
Model 1A Sales Catalog 6 pages + Illustrated Parts List plus Parts Prices.
There was also a development of the Linley made in England by the company
Downham: see manual reference http://www.store.lathes.co.uk/print/ME218
ML330
LIP Milling Machine. Sales and Specification Catalogue. 8 pages.
ML350
LNS SA (Switzerland) Hydrobar HYS Bar Feeder. Instruction and Maintenance Manual in English,
French and German.
ML350A
LNS SA (Switzerland) SUPER Hydrobar HYS Bar Feeder. Instruction and Maimtenance Manual in English,
French and German.
L380
LODGE and SHIPLEY (USA): Full Catalogue circa 1922/4 170 pages.
L380A
LODGE and SHIPLEY (USA): Condensed Catalogue December 1951 with Engine,
Toolmaker, Gap and Oil Country Lathes, Copymatic, Duomatic and T-Lathes. 16
pages.
L380B
LODGE and SHIPLEY (USA): Model X Lathes. Full-range Detailed Sales
and Specification Catalogue. 28 pages.
L380C
Lodge and Shipley Model X 25-inch Selective Head Engine Lathes. Sales
and Technical Specification Catalogue 4 pages.
L380D
Lodge and Shipley DUOMATIC Lathe. Sales and Technical Specification
Catalogue 8 pages.
L381
Lodge and Shipley Model A 13", 16" and 20" Engine,
Toolroom and Manufacturing lathes Catalogue 1949. 22 pages.
L382
Lodge & Shipley Powerturn (PT) Toolmaker's Toolmaker Lathes Catalog Set covering
the following models: 1610, 2013 & 2013-17 Detailed Sales & Technical
Specification Catalogue. 14 pages.
Lodge & Shipley Powerturn (PT) 20-inch "Standard" Lathe. 2 different Sales &
Specification Catalogues dated 1955. 12 pages.
Lodge & Shipley Powerturn (PT) 16-inch "Engine" Lathe. Sales & Specification
Catalogue dated 1956. 6 pages.
Lodge & Shipley Powerturn (PT) 16-inch "Toolmaker" Lathe. Sales & Specification
Catalogue dated 1956. 6 pages.
Lodge & Shipley Powerturn (PT) 13-inch "Toolmaker" Lathe. Sales & Specification
Catalogue dated 1955. 6 pages.
Lodge & Shipley Powerturn (PT) 13-inch "Engine" Lathe. Sales & Specification
Catalogue dated 1955. 6 pages.
L383
Lodge and Shipley "Bluechip" Screwcutting Engine Lathe
Catalogue 6 pages.
L386
LOEWE (Ludw.Loewe and Co. A.G. Berlin) Complete range Catalogue dated
1905. 295 pages of lathes, milling machines, gear-cutting machines, cutter
grinders, drills, shapers, automatic pin and stud machines, and a wide range of
engineering equipment and tooling.
L390
LOGAN (USA) Lathes and Accessories: An interesting very early (1943) Parts Manual
and Catalogue with complete details of the first 10-inch lathe in bench, stand and turret
form including fine plate phtographs and, unusually, the Parts Manual as Sectional Drawings.
Other interesting, early Logan Sales and Technical Specification Literature is included. 49
pages.
L390A
LOGAN Lathes (and 8-inch Shaper) Full-range Catalog - this is the most complete and detailed of the all the Logan catalogs issued during the 1950s and 1960s:
Catalogue Code: 15-963-10M-MP (1963) with complete details of the lathes and their accessories showing:
14-inch Model 6565 14-inch Engine lathe and 6510 and 6560 versions; 6530 Turret
lathe; the 12-inch models on different stands cataloged as the 255-V, 2525-V, 2535-2-V, 2545-2-V;
the 11-inch models in all the versions "1955", "1925", "1935-2", "1915" and "1920".
10-inch lathes listed in all their specifications as the "1825", "1840-2", "1820", "1815", "1875" and 1830-2" and
the 9-inch range as the models 9828-1, 9828-21, 9828-41, 9828-61, 9817-1, 9817-21, 9817-41 . 24 well-illustrated pages.
L390C
Logan Electri-matic Automatic Turret lathe Catalogue - includes price
list. 8 pages.
L390D
Logan "Powermatic" lathes. late Catalogue showing
the final production machines in screwcutting and turret types. A detailed and
well-illustrated Catalogue. 34 pages.
L392
LOGOS (Italy) Automatic Lathes Types L18, L24, LE30, LE42, LE52 and L64. Sales, Technical Specification and Accessories Catalogue. 14 pages.
L395 Lombardo SF-1300 and F-2500 Facing Lathes. Sales & Technical Specification Catalogues. 14 pages.
Lorch lathes were marketed using "F.Lorch", "Lorch, Schmidt
and Co." and "L.S. and Co." markings
L441 LORCH and Lorch Schmidt - wonderful full-range, fully-illustrated Sales
and Specification Catalogue from circa 1910 showing watchmaker to backgeared
and screwcutting lathes, milling machines, accessories, collets, production
equipment, drive systems, etc. typically as produced from around 1890 to 1920
76 pages.
L441A LORCH: General Catalogue shows the complete range of Precision Plain
Turning and Screwcutting Lathes, and their accessories, current from the
1920s until the late 1930s. 42 pages.
L441B LORCH: General Catalogue shows the complete range of Precision Plain
Turning and Screwcutting Lathes, and their accessories current from the
late 1930s until the 1950s. Includes the Types LLN, Av, AV1, AV11, B, Bv1,
BV11, C, LLRN, AVR, Bv1R, LLPN, A11P, BP, Bv1P, LLKGN, AVRG, BV1RG and "Special
Lathes". 40 pages.
L442A LORCH Watchmaker Lathes Accessory Sheets. 5 pages.
L442B LORCH AV, AV1, AV4, AV1-K, AV1-L, AV1-k and AV11K Lathes. Sales and
Technical Specification Catalogues (4 in total covering all the Lorch lathes
with an "AV" prefix from early simple plain-turning models to the
last of the underdrive screwcutting type) . 16 pages.
L442F LORCH B27LZ Lathe Sales and Technical Specification Sheet. 2 pages.
L442G LORCH B11Z Lathe Sales and Technical Specification Sheet. 2 pages
L442H LORCH BV1-K and BV11-K Lathe Sales and Technical Specification Sheet.
2 pages.
L442J LORCH BV1-K Short-bed Lathe Sales and Technical Specification Sheet. 2
pages.
L442L LORCH BVIR-K Lathe Sales and Technical Specification Sheet. 2 pages.
L442M LORCH JUNIOR Universal Lathe. Two Sales and Technical Specification Catalogues. 6 pages.
L442N LORCH KD50 Lathe Sales and Technical Specification Sheet. 3 pages together
with a later 2-page edition.
L442Q LORCH LAS Lathe Sales and Technical Specification Sheet. 4 pages.
L442R LORCH LAS Lathe Sales and Technical Specification Sheet later edition
with price list. 4 pages.
L442S LORCH LL Series Lathes (LLS and LLV) Sales and Technical
Specification Sheets and Price List. 9 pages.
L442RK LORCH LL-K Precision Instrument Lathe. Sales and Technical
Specification Catalogue. 4 pages. English or German Text.
L442T LORCH B30LZs and B30LZ Lathes. Sales and Technical Specification
Catalogue. 10 pages
L442U LORCH P-Type Sliding Spindle (and Optical Thread-chasing Lathes) Two catalogues covering the LLPV, A11P, BP, BV1P & BV1PO.6 pages.
L442V LORCH Boxed Watchmakers' Lathes Sales and Technical Specification and
Accessories Catalogue. 9 pages.
L443 Lorch Precision Instrument Lathes 1970: Sales and Technical
Specification Catalogue 4 pages.
L444 Lorch Lathe Accessories for Models A, B and C 19 pages.
L445 All the above Lorch literature on CD-ROM.£125
L800 LUX No. 2 Milling Machine (made by Bolla Eligio Mario). Sales and
Technical Specification and Accessories Catalogue. 12 pages.
M2 MAAG Gear Cutting Machines. If you lack knowledge about how MAAG machines work, this publication will help - a comprehensive and detailed review by the MAAG Company of how its machines work with detailed sections onA comprehensive and detailed review by the MAAG Company of how its machines work with detailed sections on:
Design of the Machines, Principle Characteristics, Advantages, Working Principles; Working Motions, Production Capacity, Setting the Machines, Testing the Machines,
Final Checking and Starting Up, Accuracy, Special Types, Fixtures, Special Equipment, Examples of work, Bore in the Table, Capacity and Advantages, Cutting Tools,
MAAG Gar Testing Instruments and examples of MAAG Gear Grinding Machines. 38 Pages.
M2A MAAG Detailed, well-illustrated All Models Catalogue explaining how the machines are constructed and work and l442u the Gear Cutting Types SH-10, DSH-20, SH-45, SH-75-C, SH-100, SH180/4, SH-180/300/4 and SH-350/4.
Gear Grinding HSS-10, SS-30-X, HSS-30, HSS-30-B, SS-60-X, HSS-60-B, HSS-60/80-B, HSS-90-P, SHS-150, HSS-360, JHSS-75,KS-42 and KP-42.
Gear Measuring and Testing Instruments PH-60 and PH-100. Centre Distance and Concentricity Testing Instruments DAS-1, DAS-2, DAS-4, DAS-10 and DAS-40.
Helix Angle Checking Instruments HM-30 and HMV.
Examples of work the machines can undertake including Hge Reduction Gears For marine, Rolling Mills, Cement Works, Mine Winding Gears and the maker's precision gear pumps.
38 pages.
M6 MACMON M100 Universal Precision Milling Machine (Deckel-like). Sales and
Technical Specification and Accessories Catalogue. 16 pages.
M6A MACMON M200 Universal Precision Milling Machine (Deckel-like). Sales and
Technical Specification and Accessories Catalogue. 16 pages.
M6B MACSON 17" Geared-head Lathe Australian). Sales and Technical
Specification and Accessories Catalogue. 16 pages.
M8 MAHO Universal Milling Machines 1950s models with "Rounded Styling": Maho MH-600, MH-700 and
MH-800 and Accessories Catalogue. 4 Catalogues combined showing all versions
of the machines and accessories as both photographs and drawings. This
publications represent a complete Catalogue data pack for these models. 40 pages.
M8A MAHO ACCESSORIES CATALOGUE for Universal Milling Machines 1950s models: Maho MH-600, MH-700 and
MH-800. 14 pages. German text.
M8AGB MAHO Accessories for 1970s onwards millers. Detailed, comprehensive Catalog. English and German Text.
Covers the different heads, dividing attachments, tool holders, boring and facing heads, machine vices,
clamping tools, measuring instruments and tool storage facilities 44 pages.
M8B MAHO Universal Milling Machines - Second Series with "Angular
Styling". Comprehensive and detailed Sales and Technical Specification
Catalogue showing the MH-700, MH-800, MH-900, MH-1000 and MH100 models. 32
pages.£40
M8BC Collection of highly detailed, Individual Sales Specifaction Catalogues for the MH-C300, MC400, MC500, MC600, MH-C700P, MH-C700NC, MH-C700K,
MH-700C, MH800, MH-C800, MH1000 and MH2000NC. Contain excellent
descriptions and drawins of the machines' construction and functions. 170 pages
M8C MAHO Detailed Product-range Sales and Technical Specification Catalogue: Later
"Square-style" as sold during the 1980s. MH-400P, MH-600P, MH-800P, MH400C, MH-700C, MH700P,
MH-900P/K/C, MC500, MC600 and control system details. 36 pages.
M8D MAHO All Product-range Sales and Technical Specification Catalogue (small
format) : MH-400P, MH-600P, MH-800P, MH300C, MH500C, MH600C, MH-700C, MH-1000
C/K, MH-2000C, MH-2000C/K, MC600, MC5HS, MC5HS and control system details. 24
pages.
M8E MAHO MH700C Universal Milling and Boring Machine. Sales and Technical
Specification Catalogue. 20 pages.
M8EC MAHO MHC700P, MH-C700NC and MH-C700K Sales and Technical Specification
Catalogue. 24 pages. .
M8F MAHO MH1000C Universal Milling and Boring Machine. Detailed and well-illustrated Sales and Technical
Specification Catalogue. 20 pages.
M8G MAHO MC400 Horizontal Machining Centre. Sales and Technical Specification
Catalogue. 18 pages.
M8H MAHO MC500 Machining Centre. Sales and Technical Specification Catalogue.
8 pages.
M8J MAHO MC600 Horizontal Machining Centre. Sales and Technical Specification
Catalogue. 24 pages.
M8K MAHO MH400 and MH500 Sales, Accessories and Technical Specification
Catalogues. 16 pages.
M8L MAHO 60 Years Anniversary Booklet (1920 to 1980) with English text. This is a high-quality production showing, in effect, a "Factory Tour" of the works as they were
in the late 1970s and covers Administration, Planning and Design, Turning, Gear Cutting, Spindle Production, Quality Control, Large Component Manufacture,
Jig-boring, Slideway Grinding, Paint Finishing, Maho machines in Production, Final Assembly, Final Inspection, Assembly Branch in Emstal, Haho P machines in Use,
Maho CNC Machines in Use, Maho Machining Centres in Use, Training School Facilities, Adcive to Customers, Customer Training Seminars, After-sales Service, Staff Facilities and Leasure in and Around Pfronten.
52 pages.
M8X Mahr Gear Testing Equipment Catalogue. Covers the Types 867, 26-N, 887 (40 SM), 888, 888-M, 889, 890, 891-S, 891 SE/1, 891 SE/2, 892, 894, 894-B, 894-C,
895, 895-A, 895-C, 895-D, 895-G, 895-H, 896. 16 Pages.
M9
MAKINO K55 Series Turret-head Milling Machines. Turret Type Vertical Millers with the Hi-speed Head types KAP and KBP. Turret Type Vertical Millers with
the Hi-power head Types KG, KGP, KGA and KGAP.
Jig Boring and Milling Machines Types KJ, KJP, KGJ and KGJP. Die Sinking Milling Machines with Hi-speed Head Types KC, KCP, KJ-C and KJP-C. Die Sinking
Milling Machine with Hi-power head Types KGC, KGCP, KGJ-C and KGJP-C. Three-dimensional Universal Die Sinking and
Milling Machines Types KU3 and KGU-3 and Accessories. 32 detailed pages.
M9A
MANN Milling Machines: Vertical Model 2231 Size 2A and Horizontal Model 4102. Sales & Technical Specification Catalogues. 8 pages.
MANCHESTER RAPIDOR Hacksaws- see under RAPIDOR
M10 MANNAIONI Threading Machines. Sales and Technical Specification
Catalogue. 12 pages.
M10A MANNAIONI Decomat 26 Sequence Controlled Turret Automatic lathe. Sales
and Technical Specification Catalogue. 12 pages.
M12B ManSon: USA Maker's Sales Folder (4 x A5 pages) plus various sheets and
adverts including and English Dealer's Sales Folder. 14 pages. Plus an
additional 24 pages of accurately dimensioned sketches of every part that makes
up the lathe - including the contents of the
accessory kit - from which any component could be manufactured. Notes:
these are sketches, not engineering drawings. 24 pages.
M15 MARLOW Vertical Millers: Models Standard 1, 2 and 3, 4-DF and 5-DF,
TM-10, TM-10A. Sales and Technical Specification Catalogues. 7 pages.
MARLOW - Eagle Surface Grinders - see under EAGLE above
M18 MARS Lathes (Australia): 6-inch and 5.5-inch "Hercules" lathes.
Sales and Technical Specification Catalogue. 8 pages.
MAS lathes - see under MATOS
M20 MARTIN Lathes DDS-36, DDS-42 and DDS-51. Sales and Technical
Specification Catalogue. 16 pages.
M20A MARTIN Lathes DLZ502, DLz602 and DLZ702 Sales & Technical Specification Catalogue.8 pages.
M20B MARTIN Lathes D63, DS63, D71, DS71, D80 and DS80 Sales and Technical Specification Catalogue. 20 pages.
M21 MARVIN Milling Attachments Catalog. Shows the Vertical Milling Head, Slotting Attachment, Dividing Attachment (with Division Chart and Raising Blocks), Rotary Table (with Division Chart) and Chucks. 12 pages.
Digitally restored to a perfect reproduction.
M22 MASTERTURN Lathes 16 and 18-inch models. Sales and Technical
Specification Catalogue. 6 pages.
M24 Three MATHEYS "Semi-Jig Boring Machines" Catalogues. All are highly detailed with many
illustrations, annotated control diabrams, some sectional drawings, Accessory Listings and price lists. The first,
in English, with 8 pages, covers the Types FPN-28 and FPN-PO; the second concerns the SP-30 and SP-35, the third, is a 6-page
Catalogue in German covering the SP-30, 35-NC and 3A models. 32 pages in total.
M24A MATHEYS Foreuses et Fraiseuses de Precision Modeles 13/P1, 19/P1, 28/P1, 10P, 13P, 19P et Perceudr Radiale Murale. Catalogue de vente et de spécifications techniques. 5 pages
M32 MATOS (MAS) Lathes: 8-inch and 9-inch, 10-inch and 11-inch. Sales and
Technical Specification Catalogue. 12 pages.
M32C MATOS (MAS) Shaper Model 700 (28-inch Stroke). Sales and Technical
Specification Catalogue. 2 pages.
M36 MATRIX No. 1A Precision Cylindrical Grinding Machine. Detailed Sales and
Technical Specification Catalogue with annotated diagrams, foundation plan,
electrical diagrams and lubrication chart. 18 pages.
M36A MATRIX No. 2 Precision Universal Grinding Machine. Sales and Technical
Specification Catalogue. 4 pages.
M36B MATRIX No. 10 Precision Plain Thread Grinding Machine.. Sales and
Technical Specification Catalogue. 12 pages.
M36C MATRIX No. 50 Optical Jig Boring Machine.. Sales and Technical
Specification Catalogue. 12 pages.
M36D MATRIX Machine Tools. general Catalogue with the specification of
external, internal and cylindrical grinding machines, spline and gear
grinding machines, broach grinding machines, vertical broaching machines and
numerically-controlled machining centres including: No. 24, No. 33, No. 37, No.
39, No. 42, No. 46, , No. 47, No. 66, No. 69, No. 70, No. 78, No. 1600, No.
3700, No. 4700, No. 5700, No. 7900, No. 7905, Type GP, HU, GCA, S.10, BV, VERO
1000, VERO 2000. 30 pages.
M36E MATRIX Thread Grinding Machines. Detailed description of the capabilities
of these machines, all of which worked in the same way. Specific models
mentioned include the TU-711 (No. 16); TU-1020 (No. 39) and TU-1042 (No. 46)
M36F MATRIX 1604bProduction Thread Grinding Machine. Sales and Technical
Specification Catalogue. 6 pages.
M36G MATRIX No. 37 and 47 Automatic Plunge Cut Thread Grinding Machines.
Detailed Sales and Technical Specification Catalogue. 20 pages.
M36H MATRIX No. 37 and 47 Plain Thread Grinding Machines. Detailed Sales
and Technical Specification Catalogue. 20 pages.
M36J MATRIX No. 39 and 46 Thread Grinding Machines. Detailed Sales and
Technical Specification Catalogue. 32 pages.
M36K MATRIX TU711, TU1020 and TU1042 Thread Grinding Machines. Sales and
Technical Specification Catalogue. 8 pages.
M36L MATRIX G.10 Automatic Cycle Spur and Helical Gear Grinding Machine.
Sales and Technical Specification Catalogue. 12 pages.
M36M MATRIX Wheel Forming Equipment for Thread Grinding Machines. Sales and
Technical Specification Catalogue. 4 pages.
M36N MATRIX Thompson-Matrix Surface Grinding Machines - All-models Sales and
Technical Specification Catalogue. English, French and German text. 30 pages.
MM510A Matrix (Coventry Gauge and Tool Company)Floating Carriage Diameter Measuring Machines (High-precision Checking of the diameters of threaded components)
Combined Catalogue and Operating Instructions.
M38 MATTSSON and ZETTERLUND Type VF-600 Vertical Milling Machine. Sales and
Technical Specification Catalogue. 4 pages.
M39 Maurizio Magnoni (MM) AREX 1100 Universal Milling Machine. Sales and Technical Specification Catalogue. 4 pages.
MAXIMAT - see entry under EMCO
M40 MAXNOVO T.A.M. lathes. Detailed Sales and Technical Specification
Catalogue with superb illustrations. 16 pages.
M40A MAXNOVO General Catalogue showing Automatic and duplicating lathes models:
M.E.C. 22-320; M.E.C. 22-310; M.E.C. 22-360; and 22-360R; M.E.C. 22-370,
M.E.C. 22-380; M.E.C. 22-390; M.E.C. 23 Fronto; M.E.C. 23 Plurio; M.E.C.
25-311; M.E.C. 25-361; M.E.C.25-341; M.E.C. 25-341S; M.E.C. 25-341A; M.E.C.
25-346; M.E.C. 25-346A; M.E.C. 25-380. 8 pages.
M42 McCABES (USA) Double Spindle Lathes. Sales and Technical Specification
Catalogue circa 1900 42 pages.
M44 McILVANIE "Century" lathe: Sales and Technical Specification
Catalogue 6 pages.
M45 MECA TR-1 Turret Drill. Sales & Technical Specification Catalogue. 2 pages.
M46 MEDDINGS and Meddings "Pacera" drilling machines (these were the
early models made during the 1930, 1940s and early 1950s). Detailed, full-range
Sales and Specification Catalogue showing the range of models from the 1940s
until the 1970s Series "L", "MB", "MF",
"HB", "F", "A", "P", Multi-head,
"W", "WA", Special-purpose machines, Jig Saws, Fret Saws,
Hacksaws, sanding drums and all the many accessories, etc. 79 pages.
M46X MEDDINGS Drills. 4 Sales and Technical Specification Catalogues showing
all the drills made during the 1970s and 1980s.
M46Y Meddings Vertical Milling/Drilling machine UBM-30. Sales and Technical
Specification Catalogue. 4 pages.
M47 Melhuish Machine Tools - 24 pages of plain, screwcutting and ornamental lathes, countershaft and accessories extracted from the 400-page all-models' Catalogue
M47A Melhuish Machine Tools, Engineering Accessories and Tradesmen's Tools 400-page Catalogue from 1890.
MM1 Mello Grinders (Mello A.A. Maquinas E Equipamentos). Detailed Catalogue Collection (Colección de catálogos técnicos detallados de ventas)
Hydraulic Horizontal Spindle Surface Grinders (Retificadoras Planas Tangenciais Hidraulicas) RPT-3G, RPT-4G, RPT-5G;
Universal Cylindrical Grinders (Retificadoras Cilindricas Universais) RHU-600/3, RHU-1000/3, RHU-1500/4 ; Single-point Tool and
Drill Grinder (Afiadora de Ferramentas Monocortantes e de Brocas) AFM-7; Hydraulic Horizontal Spindle Surface Grinder
(Retificadoras Planas Tangenciais Hidraulicas) RPT-2; Universal Tool and Cutter Grinders (Afiadoras Universais) AMX-4, AMY-4 and the Universal
Cylindrical Grinder ((Retificadoras Cilindricas Universa) UNS-2. 48 pages.
M48 MELLOR Lathe: 2 Sales and Technical Specification Catalogues and Price
list 1945. 11 pages.
M49 MENG 160, 175, 180, 200, 225, 250 and 300 lathes (by O.S.I.C. Italy). Sales
and Technical Specification Catalogues. 18 pages.
M50 MENTOR (Emco, as marketed by the Elliott Group under the EME brand name)
Mentor Vertical milling Machine. Sales Sheet. 2 pages.
M51 MENZIKEN (Switzerland) M200 16.5-inch High-precision lathe. Sales, Technical Specification and Accessories Catalogue. 16 pages.
M51A MENZIKEN (Switzerland) J185 High-precision Lathe. Sales and Technical Specification and Accessories Catalogue.
8 pages.
M51B M220HD MENZIKEN (Switzerland) Relieving and Copy Attachments Catalogue. Sales and
Technical Specification Catalogue. 8 pages.
M51C MENZIKEN (Switzerland) S1 Gauge Grinding machine. Sales and Technical
Specification Catalogue. 4 pages.
M51D MENZIKEN (Switzerland) LA-750 (version Dkr-n with extra slides - hydraulic
copying, turret slide undercutting slide) Vertical Turning Machine. Maker's
detailed one-off, hand-assembled specification booklet with sample jobs
described, comments, descriptions and explanations. 26 pages.
M51E MENZIKEN (Switzerland) LA-750-Ex Vertical Turning Machine with Compound
Slide. Sales and Technical Specification Catalogue. 4 pages.
M51F MENZIKEN (Switzerland) General Catalogue showing the LA70 Vertical Turning
Machine, LA750Ex Vertical Turning machine, LA750Ek Vertical Turning Machine,
M200 lathe, Relieving attachment M200, Universal Copying Attachment M200, J185
"Junior" lathe, Boring Tailstock J185, Taper Turning J185. 6 pages.
M52 Mercer Drills - Sales & Specification Catalogue. 3 pages.
M53 MERIDEN Machine Tool Company (USA). Full-range Lathes Catalog from 1907 including
Forming, Turret, Combination and Brass Workers' types; accessories including tool rests, indexing attachments, etc. 46
pages.
M55 MERLI CLOVER LATHES - Sales, Technical Specification & Accessories Catalogue Set: Models 30/41, 36/47, 20/30, 22/33, 18/27 and "Clovis 50"
30 pages
M57 METALCLAD Woodworking Catalogue Collection: Type DA Vertical Boring Machine; Type SM Vertical Spindle Moulder;
Standard Duty Vertical Vertical Spindle Moulder and 30" and 35" Bandsaws. 16 pages.
M58 METALIN 300A Automatic Bandsaw. Sales and Technical Specification Catalogue 4 pages.
METALMASTER Universal Machine Tool (England) see under IMPETUS above
METALMASTER lathe by BRADFORD (U.S.A.) - see under BRADFORD above
M59 METBA MB-0, MB-1, MB-2, MB-3 and
MB-4 Universal Precision Milling Machines. Detailed Technical Sales and
Technical Specification Catalogues with use and mounting of accessories.
33 pages.
M60 Meteor (Swiss-made) Drill Grinders Models ME14, KB53 and KB56. Sales & Technical Specification Catalogue. 4 pages.
M61 MEUSER (Barber-Meuser) L-Type lathes. Sales and Technical Specification
Catalogue. 10 pages
M100 AUTOMETRIC Jig Borer. This most unusual machine with round bars for all the sideways - and appears to have been built by the Autometric Machine Tool Co of Berkeley, California;
the Meyer Mechanical Laboratory and then by Kearney & Trecker. Two Sales and Technical Catalogs one by Meyer with 8 pages and a second with 12 pages by the Autometric Machine Co.
M150 MEYER and BURGER AG Multi-purpose Machine Tool: Rare Sales and
Technical Specification and Accessories Catalogue 12 pages.
MIDGELY and SUTCLIFFE England: see under RICHMOND
M200 Midsaw Woodworking Machines Sales and Technical Specification Catalogues: Includes 12 pages for the Universal Woodworker with
illustrations of its various functions (saw bench, boring machine, surface planer, planer and thicknesser, tenoning, mortrising and moulding machines)
and 7 pages showing the Company's bandsaws, sawbenches, spindle moulders, stair string machine, planers and horizontal belt sanders.
M200A Midsaw Band-type Saw-Filing Machines: Standard, Minor, Minor Deep Throat and Super Minor. Detailed and Well-illustrated Sales
and Technical Specification Catalogue set. 20 pages.
M200B Midsaw Toolroom Machinery. Two comprehensive, well-illustrated and descriptive sales and technical specification catalogues that show: Bandsaws and Band-filing Machines,
Horizontal Bandsaws, Cut-off Machines, Cut-off Bandsaws, High-speed Edge Miller, Overhead Slitting Saws, Circular Tables, Filer and Jigsaw and Saw Sharpeners.
Models include the Types D and DC Bandsaw and Filing Machines and Bandsaws Types HY22, HY30, HY36, NF, HNF, AT (Standard & Rigid) ATC (Canting Body)
"Major" and Accessories. 40 pages.
M365 MIKRON Lathe and Milling Machine Catalogue. The largest and most complete
Mikron publication that shows, in great detail and clarity, all the various
combinations of toolroom lathes and milling machines of the traditional
pattern. Catalogue is dated 1951 and numbered No. 50B. 84 Pages.
M365A MIKRON T90 Precision Bench Lathe Sales and Technical Specification
and Accessories Catalogue 28 pages.
M365B MIKRON Range Catalogue dated 1935 showing Precision Bench Centre Lathes,
Bench Capstan Lathes and Bench Milling Machines and Accessories as made from
the early 1930s until the 1940s. 68 Pages.
M365C MIKRON Range Catalogue dated 1935 showing Gear Cutting Machines, Thread
Milling Machines and Sharpening Machines and Accessories as made from the early
1930s until the 1950s. 36 Pages.
M365FF Mikron F75 Precision Milling Machine Catalogue. 14 pages. This miller is shown here
M820 MONDIALE Type L.1 variable-speed lathe. Sales and Technical Specification
and Accessories Sales Sheet. 2 pages.
M820A MONDIALE Type L.149 variable-speed lathe. Sales and Technical
Specification and Accessories Catalogue. 12 pages.
M820B MONDIALE CELTIC Lathes. Combined Catalogue covering the early Models 12,
14, 17 and 20. Sales and Technical Specification and Accessories Catalogue.
8 pages.
M820C MONDIALE CELTIC 12 and 14 lathes catalogues: one for the later Models 12 and 14
with angular styling and another for the earlier Model 12 with rounded styling
Catalogue. 14 pages. Includes high-resolution copies of the frequently damaged
and illegible screwcutting charts.£16
M820D MONDIALE CELTIC 14 Lathe: Sales and Technical Specification and
Accessories Catalogue. 6 pages.
M820E MONDIALE CELTIC 17 Lathe: Sales and Technical Specification and
Accessories Catalogue. 6 pages.
M820F MONDIALE CELTIC 20 Lathes: Two Sales and Technical Specification and
Accessories Catalogues covering both early and late models. 18 pages.
M820G MONDIALE Gallic 14 and Gallic 16 lathes: Combined Sales and Technical
Specification and Accessories Catalogue. 8 pages.
M820H MONDIALE Gallic 14 Lathe. Sales and Technical Specification and
Accessories Catalogue. 8 pages.
M820J MONDIALE Gallic 16 Lathe. Sales and Technical Specification and
Accessories Catalogue. 10 pages.
M820K MONDIALE Gallic Super 16 Lathe. Sales and Technical Specification and
Accessories Catalogue. 8 pages.
M820L MONDIALE Hydro-Gallic Lathe. Sales and Technical Specification and
Accessories Catalogue. 12 pages.
M820M MONDIALE "NORDIC 25" Lathes: Two Sales and Technical
Specification and Accessories Catalogues covering both early and lathe
models. 12 pages.
M820N MONDIALE "GALLICOP" Automatic Cycle Copying Lathe. Sales and
Technical Specification and Accessories Catalogue. 20 pages.
M820P MONDIALE "GALLIC 16N" and GALLIC 16N Cyclic". Sales and
Technical Specification and Accessories Catalogue. 14 pages.
M822 MondialE "VIKING" Milling machine 3-MA. Sales and Technical
Specification and Accessories Catalogue. 8 pages.
M822A MondialE "VIKING" Universal Milling Machine - rectangular front
to the knee with handwheel top right, crank lever to the left and two levers
side by side along the bottom edge. Sales and Technical Specification and
Accessories Catalogue. 14 pages.
M825 MonoFap 180A Lathe (Antonio Anselmi) Sales & Technical Specification Catalogue.
English, French, German and Spanish text. 6 pages.
M825A MonoFap 225E Lathe (Antonio Anselmi). Sales & Technical Specification Catalogue. Italian text. 2 pages.
M830 MOORE Precision Machine Tools. No. "one-and-one-half" Jig Borer,
No. 3 Jig Borer, No. 3 Jig Grinder, Precision Rotary tables, Micro-sine Table,
Precision Index Centres, Moore Die Flipper, Pantograph Wheel Dresser, Motorized
Centres. Abbreviated Sales and Specification Catalogue. 8 pages. .
M830A MOORE No. 2 Jig GRINDER. Detailed Sales and Technical Specification and
Accessories Catalogue. 16 pages.
M830AC MOORE No. 2C Jig GRINDER. Detailed Sales and Technical Specification and
Accessories Catalogue. 22 pages.
M830B MOORE No. 3 Jig BORER. Detailed and well-illustrated Sales and Technical Specification
and Accessories Catalogue. 34 pages.
M830C MOORE No. G-18 Jig Grinder, all versions. Detailed and well-illustrated Sales and
Technical Specification and Accessories Catalogue. 44 pages.
M830D MOORE Continuous-path Jig Grinder, all versions. Sales and Technical
Specification Catalogue. 4 pages.
M830E MOORE Precision Diamond Turning and Grinding Machines giving the
specifications of: Moore Aspheric Generators (diamond turning machines) Types
M-18 and M-40. Moore; M-18 Oil Shower Aspheric Generator; Moore T-base Lathe
2-axis CNC Turning machine; Moore Optical Flat Generator. 12 pages.
M830F MOORE "Accessories for Precision Jig Boring and Jig
Grinding". Comprehensive Catalogue showing everything offered to accompany these
Moore machines. 168 pages
M830G MOORE Sales sheets for: Moore Precision Spin Table; 17,500 r.p.m.
Grinding Head; Motorized Centres; Rotary Tables (12,960,000 divisions to plus
or minus 1/2 second of accuracy); Precision Index Centres.24 pages
M830H Moore Tools "The First Half Century" An Anniversary Booklet published in 1974 celebrating and detailing the
Company's 50-year rise to fame. The people and personalities involved and the range of high-class, high-precision
jig borers, accessories and measuring machines made.
M840 MORI SEIKI Type ML Precision Lathes (ML-620 and ML-850). Detailed Sales and
Technical Specification Catalogue. 14 pages.
M840A MORI SEIKI Type SL1 CNC lathe. Sales and Technical Specification
Catalogue. 6 pages.
M840B MORI SEIKI Types MS, MR and MH Lathes. Two detailed and well-illustrated Sales and Technical Specification Catalogues.
One dedicated to the original M-Type, the Model "S". 20 pages.
M850 MOSELEY (USA) Watchmaker's lathe "New Model" Very rare Catalogue
No.11 late 1800s. 103 (small) pages.
M860 MOSER BD-40E Drilling Machine (Switzerland). Sales & Technical Specification Catalogue. English & Italian Text. 8 pages.
M875 Muller & Co. England (makers of precision screws, taps and dies, etc.) 20-page Celebratory Booklet dated circa 1948. Company history, descriptions of manufacturing methods and factory photographs, etc.
M880 Muller (Otto Muller, Germany). The amazing 'Rapid Radial Drilling Machines' Models SR23 and SR30. Sales & Technical Specification Catalogue.10 pages.
MM520 MULTIFIX Quick-Change Toolholders. Not a manual but a very detailed Sales
and Accessories Catalogue showing the complete range of equipment and
dimensions. 8 pages.
M900 MURAD "Antarctica" Precision Lathe: Two Sales and Technical
Specification Catalogues. 8 pages.
M900A MURAD CADET Lathe Mk.2: Sales and Technical Specification Catalogue. 4
pages.
M900B Murad BORMILATHE "The Amazing Bormilathe". Detailed and rare
Sales and Technical Specification Technical Booklet. 20 pages.
MM900B MURAD BORMILATHE an excellent and detailed Technical Sales and
Technical Specification Booklet with Screwcutting Charts and a full explanation
of how the machine and its accessories function. 20 pages.
M900D Murad "Production Times" 3 editions of the large advertising
sheet (8 x A4) put out by Murad showing the Bormilathe, 3Q Capstan, Series 4
and No.1 and 2 Velomatic Capstans and the Centre lathes. 24 pages.
M900E Murad CAPSTAN LATHES: Sales and Technical Specification Brochure. 16
interesting pages covering the machines, users and photographs of the lathes
installed and in use.
M900F MURAD Sales and Technical Specification Catalogue "The Customer is
Always Right". 16-page booklet describing the company's history and
products.
M900H MURAD DUSTLESS GRINDER. Sales and Technical Specification Sheet. 2
pages.
M900E Murad CAR: Sales and Technical Specification Catalogue, 4 pages;
Art-worked Drawings/photographs 4 pages;
M900F All the above Murad Literature.
M950 MORAT B5a Pinion Cutter Catalogue. 2 pages.
M950A MORAT Hobbing Machines B9 and B9A. Sales and Technical Specification Catalogue.
8 pages.
M950B Morat Universal Hobbing Machine B11. Sales and Technical Specification
Catalogue. 8 pages.
M1000
Myford Lathe & Milling Machine Catalogue Collection consisting of virtually every Catalogue - including
the very first issed (less duplicated content) for the following lathes: Myford M-Type (and associated
Drummond M-Type) Myford ML7, ML7 Tr-Leva, Super 7, Super t Plus, Super 7 Sigma Plus, Super 7 Connoisseur,
ML7R, ML10, Myford 254 and variants, Myford ML1, ML2, ML3 and ML4, 4-inch Precision MF32, MF74, etc. 280
geared head, ML8 wood lathe (together with all the accessory sheets for the planer-thicknesser, bandsaw, mortiser,
saw bench, etc.) and the VM-A, VM-B, VM-C and VM-10 Milling Machines. 296 pages bound in 3 volumes.
N1 Naerok (Korean backwards) Metal and Wood Lathes, Vertical Miller, Drills,
Bandsaws, Drills, etc. 19 pages.
N6 Nardini MS 350/410 lathes. Sales and Specification Catalogue. English and
German text. 4 pages.
N10 NEBEL Lathes: Wonderful full-range Catalogue complete
with company history. 84 pages.
N10A NEBEL Lathes Series N 27-inch. Sales and Technical Specification
catalog. 6 pages.
N10B NEBEL Lathes Series N 20-inch. Sales and Technical Specification
catalog. 6 pages.
N20 NEWALL Precision bench lathe circa 1930s. Sales and Specification
Catalogue. 7 pages.
N20A NEWALL Jig Borers. Models 0, 1 and 2 First edition Sales and
Technical Specification Catalogues. 20 pages.
N20B NEWALL 1520 and Conimatic Milling and Boring Machines. Sales and
Technical Specification Catalogues. 26 pages.
N20C NEWALL 1520 Machining centre. Sales and Technical Specification
Catalogue. 8 pages.
N20D NEWALL 1520 Spacematic Auto-positing Boring and Milling machine. Sales
and Technical Specification Catalogue. 4 pages.
N20E NEWALL 1520 Jig Grinding Machine. Sales and Technical Specification Catalogue 8 pages.
N20F NEWALL 2030 Jig Borer Sales and Technical Specification Catalogue. 24
pages.
N20G NEWALL 2436 Jig Borer Sales and Technical Specification Catalogue. 16
pages.
N20H NEWALL 2442 Jig Borer Sales and Technical Specification Catalogue. 16
pages.
N20J NEWALL 2443 Jig Borer Sales and Technical Specification Catalogue. 24
pages.
N20JK NEWALL 2451 Jig Borer Sales and Technical Specification Catalogue. 20
pages.
N20K NEWALL 24N43 Auto-positioning Boring and Milling Machine. Sales and
Technical Specification Catalogue. 4 pages.
N20M NEWALL 2657 Jig Borer Spacematic Sales and Technical Specification
Catalogue. 28 pages.
N20N NEWALL 26N57 Jig Boring and Milling Machine with Digital Setting System.
Sales and Technical Specification Catalogue. 4 pages.
N20NN NEWALL 24A51 Jig Borer and Milling Machine. Sales and Technical
Specification Catalogue. 24 pages.
N20P NEWALL-KEIGHLET KU Universal Grinding Machine. Three well-illustrated and
detailed sales and Technical Specification Catalogues covering all versions. 28
pages.
Many other Newall and Newhall-Keighley Catalogues, for all-types of machine
tools, are available.
N30 NEW HAVEN LATHES (USA) A stunning Sales and Technical Specification
Catalogue of 1905 to 1912 bound with real photographs showing the entire lathe
range, accessories, details of gearboxes and aprons, etc. 60 pages.
N31 NEW HAVEN LATHES Sales and Technical Specification Catalogue of 1912.
Printed version showing lathes and accessories. 32 pages.
N40 NEWTON Milling, Planing, Rotary Planing, Plano-millers, etc. Sales and
Technical Specification Catalogue. 48 pages.
N100 "New Shepard" Lathes Catalogue 1918. Covers the 12-inch cone-head and geared-head models
with remote and built-on drives together with the 10-inch cone drive type and accessories. Includes a 1918 price list. 11 pages.
N150 NICHOLS Millers USA. Makers full range Catalogue. 11 pages.
N156 NIIGATA Milling Machines. Sales and Technical Specification Catalogue
set for the Models: 2HMB, 2HMA and 2UMA. 30 detailed pages.
N159 NILES-BEMENT-POND (including Pratt and Whitney)
massive 605-page Catalogue (circa 1920) of large USA-made machine tools
including battleship gun lathes, giant planers, shapers, millers, slotters,
etc. An absorbing and rare book from which a country could order an entire
armament works. 606 pages.
N160 NISHIMORI KOGYO "Enterprise" lathe NA-6E: Sales and Technical
Specification Catalogue. 4 pages.
NORDIC - See " Mondiale"
N170 Noble and Lund "Modern Machine Tools" Full-range Catalogue
circa 1930s showing: lathes - Axle, Break, Chuck, Crankshaft, Railway Wheel,
Roll Turning, Surfacing and Boring Shafting, Special and Turbine Lathes. Rotary
End Milling Machines, Special Milling machines, Horizontal Borers, Planing
Machines (including large Armour Plate types) Cold Sawing Machines, Special
Plate Ripping Machines, Bandsaws, Saw Sharpening Machines, Multi-spindle
drills, Special machines etc.40 pages.
N170A Noble and Lund Full-Range Catalogue of Heavy Machine Tools 1973. Plano
Millers LMA and HMA, Ram type machines LRMA and HRMAS, Open-sided Plano
Milling Machines Model OLMA, Combined Quill and Ram Type machines, Vertical
Millers, Horizontal Ram Type Millers, Rotary Millers, Fir Tree Root Miller,
Lathes, Boring machines, Circular sawing Machines, Saw Sharpening Machines,
etc. 40 pages.
N170B Noble and Lund lathes. Heavy-duty 7-foot chuck type, 4-foot chuck type
and 20", 25", 27", 30" 36", 56", 60",
63", 66", 81", 102", 112" centre height lathes. Sales & Technical Specification Catalogue. 38
pages.
N170C Noble & Lund Large Machine Tools - full-range catalogue with Lathes, Railway Shop Machine Tools,
Horizontal Planing Machines and Special Large Machine Tools. 50 pages.
MS218 NORFOLK, SIMAT Perris, Hector, Flexispeed, Simat 101, Meteor and
Derivatives. A complete 150-page Data Pack containing everything ever published
for these miniature lathes: Sales and Specification Sheets, Illustrated Parts
Manuals, sheets of Assembly Instructions for the Perris version and the Flexispeed,
Simat and Meteor. A separate 8-page Manual for the Meteor 2 is also included.
Full-size "blue print" (in sections) and an additional 8-page Mk. 1 Sales and
Specification and Accessories Catalogue together with specification and price lists from the 1970s.
N200 NORTON Type C Universal Grinding Machine sizes 12", 14" and
16". Detailed Sales and Technical Specification Catalogue. 20 pages.
N200A NORTON Centreless Grinding: "Principles of Centreless Grinding"
explanatory booklet. US42.
N200B NORTON (W.E.NORTON) RV32 Turret Drilling Machine with Plessey Controller.
Sales and Technical Specification Catalogue. 6 pages.
N200C NORTON (W.E.NORTON) Radial-arm Drilling Machines. Sales and Technical
Specification Catalogue. 4 pages. .
N200D NORTON Type CTU and LCTU Cylindrical Grinders in 6" and 10"
sizes . Sales and Technical Specification Catalogue. 24 pages.
N200E NORTON Type CTU and LCTU Cylindrical Grinders in 10" and 14"
sizes . Sales and Technical Specification Catalogue. 24 pages.
N200F NORTON Type CTU Chucking Grinder. Sales and Technical Specification
Catalogue. 16 pages.
N200G NORTON Type U-4 Universal Grinders. Sales and Technical Specification
Catalogue. 24 pages.
N200H NORTON Type CV-4 and LCV-4 Angular Wheel Slide Cylindrical Grinders.
Sales and Technical Specification Catalogue. 16 pages.
N200J NORTON 10" Hydraulic Surface Grinding machine (1930s to early
1950s). Sales and Technical Specification Catalogue. 12 pages.
N200K NORTON Type S-1 Hydraulic Surface Grinding machines. Sales and
Technical Specification Catalogue. 12 pages.
N200L NORTON Type S-3 Hydraulic Surface Grinding machines. Sales and
Technical Specification Catalogue. 16 pages.
N200M NORTON Type TS hand-operated Surface Grinding machines. Sales and
Technical Specification Catalogue. 12 pages.
N200N NORTON Gear-hobbing machines Types 16H, 24H, 36H, 48H and 72H. Very
detailed (almost an operating manual) Sales and Technical Specification
Catalogue. 28 pages.
N200P NORTON Can-O-Matic Cam Grinder. Sales and Technical Specification
Catalogue. 12 pages.
N200Q NORTON Catalog 1910 "Plain Machines for Cylindrical Grinding". 135 pages.
N400 NUTTALL 6.5-inch centre height Lathe. (Australia). Sales and Technical
Specification Catalogue. 4 pages.
020 OERLIKON UB2 Universal Milling, Drilling and Boring machine. Detailed Sales
and Accessories Catalogue with useful annotated drawings. 12 pages.
O20A OERLIKON Milling Machines MN Series showing the MN2U and MN2H: Detailed Sales, Technical Specification
and Accessories Catalogue. 20 pages.
020B OERLIKON M Series Milling Machines Plain, Universal and vertical including
the Primomatic, Secondomatic, Terzomatic, Quartomatic and Quintomatic models M10U, M10H, M12H,
M12V, M12H, FM3, M4V, MN2H and MN2V Sales and Technical Specification and Accessories Catalogue. : Sales and Technical Specification
and Accessories Catalogue. 10 pages.
020C OERLIKON "Albula" Tool and Universal Grinding Machine. Sales
and Technical Specification and Accessories Catalogue. 4 pages.
020D OERLIKON "Machines Automatiques a Tailler Les Engrenages Coniques" (Automatic Bevel Gear Hobbing Machines) KH1, KH2, KH3, KH4, KH5.
Catalogue de spécifications commerciales et techniques. Texte français. 18 pages.
O20E OERLIKON Milling Machines KC4, KC5, KC6 NC Milling machines. Sales, Technical Specification
and Accessories Sheet. 2 pages.
O20F OERLIKON F60 Open-ended Chucker Lathe. Detailed Sales, Technical Specification
and Accessories Catalogue. 16 pages.
O20G OERLIKON SKM2 Pinion and Crowl Wheel Cutting Machine. Sales, Technical Specification Sheet. 2 pages.
O20H OERLIKON Spiromatic No.2 Universal Spiral Bevel and Hypoid Generating Machine. Detailed
and Well-illustrated Sales, Technical Specification and Accessories Catalogue. 18 pages.
O20J OERLIKON FM3 Bed-type Milling Machine. Sales, Technical Specification and Accessories Catalogue. 19 pages.
O20K OERLIKON-BOEHRINGER VDF180-CA and VDF250-CA Flexible Production Turning Cells. Sales, Technical Specification and Accessories Catalogue. 12 pages.
O20L OERLIKON Koordinaten Bohrwerke R2, R3 and RE3S (Co-ordinate Boring Machines) Ausführlich und gut bebildert Verkaufs-und
Technischer Spezifikationskatalog. 40 Seiten. Includes a 4-page Catalogue in English.
O20M OERLIKON Sirius HM3.CNC and Sirius HM4.CNC Sales Sheet. English, French & German Text. 2 pages.
O20N OERLIKON HFB Milling and Drilling Machine. Sales, Technical Specification and Accessories Catalogue. 10 pages.
O20P OERLIKON KB3 Jig Borer. Detailed and Well-illustrated Sales, Technical Specification and Accessories Catalogue. 24 pages.
O20Q OERLIKON OTS 2000 Tracer System. Two Detailed and Well-illustrated Sales, Technical Specification and Accessories Catalogue. 22 pages.
O20R OERLIKON-MOTCH VNC Vertical CNC Turning Machines and Systems. Technical Specification and Accessories Catalogue. 10 pages.
O20S OERLIKON FB0V and FB1V Vertical Bed-type milling machines (Vertikale Bett-Frasmaschinen). Technical Specification and Accessories Catalogue in English.
Verkaufs- und Technischer Spezifikationskatalog Deutscher Text. 12 pages. 12 Seiten.
O20T OERLIKON FB2, FB3 and FB4 Mould & Die Making Machines with details of the OTS 2000, SU/RTS-3-D, SU/PU single-path Ziz-zag Controls,etc.
Tracing Heads OT-1, OT-5, TCA Milling Head. Sales and Technical Specification Catalogue 12 pages.
O25 OHIO Dreadnaught Shapers USA. A magnificent 16-page catalog showing the range of massive shapers the company specialised in.
Covers the 16-inch, 20-inch 24-inch, 28-inch, 32-inch and several versions of the 36-inch.
R136
OKK RAMO (OKK-RAMO) Models T-37 Lathe. Sales and Technical Specification Catalogue with details of how this interesting lathe could be set up for various jobs. 4 pages
030 OKUMA (Japan) Lathe Type L. Sales and Technical Specification Catalogue.
8 pages.
030A OKUMA (Japan) Lathe Type LS. Sales and Technical Specification
Catalogue. 16 pages.
040 OLDAK Miniature High-speed drills. Two Sales & Specification Catalogues covering the Mk.1, Mk.2, Model S and Model ED. 8 pages.
050 OLIVER MACHINERY GRAND RAPIDS USA. Full product Line Catalogue: saws, band
and jig saws, surfacers, jointers, lathes, borers, tenoner and morticer,
shapers, grinders, vises, spindle shapers. 1960s and 1970s models. 148 pages.
0100 OLIVER Woodworking Machinery Co. Ltd. Manchester. Full-range wood-machinery Catalogue including a selection of
lathes. 450 pages.
0150 OLYMPIC (Granville "Star") Lathe Sales and Technical
Specification Catalogue. Ultra rare V-bed Granville lathe Sales and Technical
Specification literature and price lists, early 1970s. 13 page.
O155 OMEGA No.1 Jig Borer (by Societa Industria Macchine Accessori di M.Rossi & C.ar.l.) Sales, Accessories and Technical Specification Catalogue. 12 pages.
O155A OMEGA No.2 Jig Borer (by Societa Industria Macchine Accessori di M.Rossi & C.ar.l.) Sales, Accessories and Technical Specification Catalogue. 12 pages.
O155B OMEGA No.3 Jig Borer (by Societa Industria Macchine Accessori di M.Rossi & C.ar.l.) Sales, Accessories and Technical Specification Catalogue. 12 pages.
O160 OMT (Optical Measuring Tools Ltd. - a Newall Company) High Precision Vertical Omtimeter.
Detailed and well illustrated Sales and Technical Specification Catalogue. 6 pages.
O160A OMT (Optical Measuring Tools Ltd. - a Newall Company) High Precision Horizontal Omtimeter.
Detailed and well illustrated Sales and Technical Specification Catalogue. 8 pages.
O160B OMT (Optical Measuring Tools Ltd. - a Newall Company) Large bench-mounted Toolmakers' Microscope.
Detailed and well illustrated Sales and Technical Specification Catalogue. 16 pages.
O160C OMT (Optical Measuring Tools Ltd. - a Newall Company) Large Capacity Universal Projectors. Four detailed and well illustrated
Sales and Technical Specification Catalogues covering the WP100, WP72, Model E and "Workshop" version.
24 pages.
O160D OMT (Optical Measuring Tools Ltd. - a Newall Company) Optical Rotary & Automatic Indexing Tables.
Detailed and well-illustrated Sales and Technical Specification Catalogue covering the 10-inch, 12-inch, 16-inch,
18-inch, 30-inch, 36-inch. 8-inch and 16-inch models with Optical Rotary Table, Tailstock and Base Counter Unit.
12-inch, 16-inch and 24-inch with Optical and Rotary and Inclinable Table and 30-inch with Automatic Indexing.
24 pages.
O160E OMT (Optical Measuring Tools Ltd - a Newall Company) Optical Inspection Equipment Detailed and well-illustrated Sales and Technical Specification Catalogue covering
the Roundness Measuring Machine, Standard Horizontal Omtimeter, Major Horizontal Omtimeter, Newall Measuring Machine,
Standard Projection Pantometer Model "E" Projection Pantometer, Model "W.P.100" Workshop Projector, 10-inch Optical Rotary Table,
30-inch Optical Rotary Table,8-inch Rotary Inclinable Table, 12 and 16-inch Rotary Inclinable Tables, 30-inch Indexing Rotary Table,
Lathe Tool Setting Microscope, Thread Grinder Microscope, Optical Dividing Heads, Thread Form Inspection Instrument, Toolmaker's
Microscope, Unit Optics, Optical Flat, etc. 18 Pages.
O175 OPUS Models 120 and 140 Metal Filing and Sawing Machines. Sales & Specification Catalogue. 4 pages.
0200 ORMEROD SHAPERS A set of Sales and Technical Specification Catalogues
for the 10", 12". 14", 16". 18", 20". 22",
24", 26" and 32" Models.
30 pages.
0200A ORMEROD SLOTTING MACHINES: A set of Sales and Technical Specifications
Catalogues for the 2", 4", 4.5", 6", 6.5", 8",
8.5", 10", 10.5", 12", 13", 14", 16",
18" and 20" plain and swivel-ram types. 34 pages.
email for details
O40 OWEN Milling Machines (USA) full-range Catalogue. Some
pages have stuck, and on these the illustrations are only partial. Very rare.
92 pages.
- PACEMAKER - see the entry above under "American" -
PACERA Drilling Machines - see above under the manufacturers
"MEDDINGS"
P3 Pacific Press & Shear Corporation. Detailed and well-illustrated Catalog showing the various Presses from 100 to 2000
tons and larger and how they are used in a variety of industries. 40 pages.
P5 PALLAS Milling and Surface Grinding Machines. 6 catalogues for the
vertical and horizontal milling machines and three for the No. 0, No. 2 and No. 2Z
surface Grinders. 22 pages in total. \
The PARKINSON Company made PARKSON Millers -
P9
PARKSON MILLERS as sold circa 1920s Beautiful Sales & Technical Specification Catalogue
and Accessories for Models S & T including sizes: 2S 42 & 43, 3S 44 & 45, 2T 60 and 61 and
3T 62 and 63 (all with round overarms). Includes useful sectional drawings through the spindle
and bearing assembles, gearbox countershafts and assemblies, photographs of dismantled spindles
and bearings, photographs of component parts such as the underside of tables, knee brackets and feed
gearboxes. Installation Measurements, lists of arbors, collets, cutters, vices, Vertical
Heads, Universal Attachments, Heavy Vertical Spindle Attachments, Slotting Heads, Rotary
table hand and power feed, Dividing Heads, Rack Cutting Attachment, Indexing Charts,
Cam Milling Attachment, etc. 105 pages.
P9A Parkson 2J and 3J Milling Machines. Sales, Technical Specification and
Accessories Catalogue. 20 well-illustrated pages.
P9B Parkson Model N Milling Machines. Sales, Technical Specification and
Accessories Catalogue. 12 well-illustrated pages.
P9C Parkson Model P Milling Machines. Sales, Technical Specification and
Accessories Catalogue. 12 well-illustrated pages.
P9D Parkson Model T Milling Machines. Sales, Technical Specification and
Accessories Catalogue. 16 well-illustrated pages.
P9G PARKSON "Adapta" Miller dedicated Sales, Technical Specification
and Accessories Catalogue.: 16 pages.
P10A PARKSON MILLERS: Early Milling Machine Catalogue showing the first models
of the Types: 1NA, 2NU, 3NU, 2NP, 3NP, "Adapta" Miller Model N and
Accessories: Sales and Technical Specification Catalogue. 16 pages.
P10B PARKSON GENERAL CATALOGUE - Millers, Gear Planers and Testers:1NA, 2NU,
3NU, 2NP, 3NP, "Adapta" Miller Model N and Accessories: Sales and
Technical Specification Catalogue. 8 pages.
P10C PARKSON 1N Universal and Plain Millers and Accessories. 6 pages.
P10D PARKSON 1NA Universal Millers and Accessories. Sales and Technical
Specification Catalogue. 16 pages.
P10F PARKSON No.2 (2N) Universal and Plain Millers and Accessories
including "L" Type self-contained Ram Head Assembly: Two detailed and well illustrated
Technical Sales and Technical Specification Catalogues spanning the 1940s and 1950s. 44 pages.
P10G PARKSON 2NU/1 Universal Miller and Accessories. Sales and Technical
Specification Catalogue. 4 pages.
P10H PARKSON 2V Vertical Milling Machine: Sales and Technical Specification
Catalogue. 8 pages.
P10J PARKSON 3V Vertical Milling Machine: Sales and Technical Specification
Catalogue. 4 pages.
P10K PARKSON NU/1 Universal Miller. Sales and Technical Specification
Catalogue. 4 pages.
P10L PARKSON 3N, 3NP, 3NU Universal and Plain Millers. Sales and Technical
Specification Catalogue. 16 pages.
P10M PARKSON 3N/3 Horizontal Miller. Sales and Technical Specification
Catalogue. 6 pages.
P10N PARKSON M1200 Series Millers: Plain Horizontal, Universal, Vertical,
Toolroom Type 80PBT Millermatic. Sales and Technical Specification and
Accessories Catalogues. 22 pages.
P10P PARKSON M1250 Series Millers: Plain Horizontal, Universal, Vertical,
Toolroom Type including details of the self-contained, Ram-type motorised
overarm: Sales and Technical Specification and Accessories Catalogue in
English, French, German and Spanish. 24 pages.
P10Q PARKSON M1500 Series Millers: Plain Horizontal, Universal and Vertical.
Sales and Technical Specification and Accessories Catalogue. 27 pages.
P10R PARKSON M1700 Series Millers: Plain Horizontal, Universal and Vertical.
Sales and Technical Specification and Accessories Catalogue in English,
French, German and Spanish. 27 pages.
P10S PARKSON 2V/23 Millermatic 1AX Controller. Technical Catalogue. 4 pages.
P10T PARKSON Arbors, Adaptors and Collets: fittings Catalogue. 4 pages.
P10PBR (Perico Baroni Raimondi) Catalogue Set covering the lathes types: TM-25, TM-30,
TM-175, TM-180S, TM-200S, TM-200P, TM-210, TM-230, TM-25, TM-250P, "Didactic" (training lathe),
TM-300-S, TM-350P, TM-450, SN-330, SN-380, T-350, T-400 and the Horizontal Borers Types AFU-80, AFU-80F and AF-90. 108 pages.
Individual catalogues are available listed below.
P10PBR1
PBR (Perico Baroni Raimondi) Horizontal Borers Types AFU-80, AFU-80F and AF-90. Sales & Technical Specification Catalogues. 30 Pages.
P10PBR2
PBR (Perico Baroni Raimondi) Lathes Types TM-25, TM-30, TM-175, TM-180s, TM-200s and TM-200P. Sales & Technical Specification Catalogues. 20 Pages.
P10PBR3
PBR (Perico Baroni Raimondi) Lathes Types TM-210, TM-230, TM-250 and TM-250P. Sales & Technical Specification Catalogues. 16 Pages.
P10PBR4
PBR (Perico Baroni Raimondi) Didactic Lathe. Sales & Technical Specification Catalogue. 8 Pages.
P10PBR5
PBR (Perico Baroni Raimondi) Lathe Types TM-300-S, TM-350P and TM-450. Sales & Technical Specification Catalogue. 16 Pages.
P10PBR6
PBR (Perico Baroni Raimondi) Lathes Types SN-330 and SN-380. Sales & Technical Specification Catalogue. 4 Pages.
P10PBR7
PBR (Perico Baroni Raimondi) Lathes Types T-350 and T-400. Sales & Technical Specification Catalogue. 14 Pages.
P10NY
Pearce (Frederic Pearce, New York, USA) Precision Lathe.Sales & Specification
Catalogue. 16 pages.
P10U PEARSON (UK) Electro-hydraulic machine Tools: Guillotines, press brakes.
Sales and Technical Specification Catalogues 46 pages.
P10V PEARSON USA Turret Milling Machine Sales and Technical Specification
Catalogue 4 pages.
P.E.C. Lathes. See under PURCELL below (Purcell Engineering Company, Australia)
P12 PEDERSEN (Vilh.Pedersen Denmark) VPF 00, VPF 02, VPV 00, VPV 02. Plain,
Horizontal, Vertical Milling Machines: Sales and Technical Specification
Catalogues 15 pages.
P12A PEDERSEN (Vilh.Pedersen Denmark) VPU-4, VPF-4 Milling Machines: Sales
and Technical Specification Catalogues Models . 8 pages. Danish Text.
P12B PEDERSEN (Vilh.Pedersen Denmark) PF2, PU2 and PV2 Milling Machines:
Sales and Technical Specification Catalogue. 6 pages.
P12C PEDERSEN (Vilh.Pedersen Denmark) "New Line" Types VPF and VPU
in sizes 21, 31, 41 and 61 Milling Machines: Sales and Technical
Specification Catalogue. 4 pages.
P12D PEDERSEN (Vilh.Pedersen Denmark) VPF2 Series V Heavy Duty, VPU4A Series 5,
VPV1 Series 5, VPV2 Series 5 Milling Machines: Sales and Technical
Specification Catalogue. 4 pages.
P12Z PEDERSEN (VILH.PEDERSEN Denmark) Tool and Cutter Grinder. Not a Manual but
an excellent and useful Sales and Specification 16-page Catalogue with
Annotated Diagrams and a full description of the various accessories and how
they are mounted. 12 pages.
P50 PENSOTTII EZIO Boring and Planing Machines (Italy). Brief sales and
Accessories Catalogue. 7 pages.
P98 PERFECTO Machine Tools (UK): Operator's (Simple) Instruction Lathe Sheet,
Threading Charts and Advertising and Price Leaflets for the Lathe, Lathe
Accessories, Tool and Cutter Grinder, Shapers, Vices, etc. The complete data
pack for Perfecto.
P105U PERRIN (Perrin Bros. Switzerland) RV-3 Jig Grinding machine.
Sales and Technical Specification Catalogue. English, French and German text. 8 pages
P105V PERRIN (Perrin Bros. Switzerland) U-1 Universal precision Milling Machine.
Sales and Technical Specification Catalogue. 4 pages
P105W PERRIN (Perrin Bros. Switzerland) AV-1, AV-2, AV-3 and AV-4 Co-ordinate Precision Drilling, Milling and Jig Boring Machines
Four Sales, Technical Specification and Accessories Catalogues. 30 pages
P105Y PERRIN (Perrin Bros. Switzerland) AV-3 Jig Borer, Jig Grinder. Technical
Specification and Accessories Catalogue. 8 pages
P105Z PERRIN (Perrin Bros. Switzerland) AV-4A Jig Borer (late version) Sales, Technical
Specification and Accessories Catalogue. 12 pages
P100 PERRIS PL90 Lathe Sales and Technical Specification Catalogue with
Accessories. 8 pages. (also, see above under Flexispeed)
P110 PETERMANN Automatic Lathes General Sales and Technical Specification
Catalogue showing the: P3, P4, P7, P10, P16, P25, T2 and T3 Models. 22 pages.
P110A PETERMANN T2 Automatic Pinion and Wheel Cutter. Sales and Technical
Specification Catalogue. 12 pages.
P110B PETERMANN T3 Automatic Milling Machine. Sales and Technical
Specification Catalogue. 12 pages.
P110cC PETERMANN No. 3 Automatic Milling Machine. Sales and Technical
Specification Catalogue. 12 pages.
P110D PETERMANN P3 Automatic Lathe. Sales and Technical Specification
Catalogue. 12 pages.
P110E PETERMANN P4 Automatic Lathe. Sales and Technical Specification
Catalogue. 16 pages.
P110F PETERMANN P7 Automatic Lathe. Sales and Technical Specification
Catalogue. 20 pages.
P110G PETERMANN 10HS and No. 10 Automatic Lathes. Sales and Technical
Specification Catalogue. 12 pages.
P110H PETERMANN P16 Automatic Lathe. Sales and Technical Specification
Catalogue. 16 pages.
P110J PETERMANN P25 Automatic Lathe. Sales and Technical Specification
Catalogue. 16 pages.
P110K PETERMANN "Machines and Apparatus for the Manufacture of
Cams". Detailed Sales and Technical Specification Catalogue showing the
Cam Hobbing and Milling machine, Cam Planing Apparatus, Cam marking Out
Apparatus and Micrometer for Cams. 8 PAGES.
P110L PETERMANN Precision Tool Grinding Machine. Sales and Technical
Specification Catalogue. 4 pages.
P110M PETERMANN No. 1 Automatic Pinion and Wheel Cutting Machine. Sales and
Technical Specification Catalogue. 12 pages.
P110N PETERMANN No. 2 Automatic Pinion and Wheel Cutting Machine. Sales and
Technical Specification Catalogue. 16 pages.
P110P PETERMANN Types AG/03, AG/05, AG09 Quick action, lever-feed forming
lathe. Sales and Technical Specification Catalogue. 8 pages.
P110Q PETERMANN Types 0, No.1, No. 2 machines to mill and thread screw pitches
and machines to make cams for automatic lathes. Sales and Technical
Specification Catalogue.12 pages Machine Automatique a Fraiser et Fileter les pas De Vis. . French text.
P110R PETERMANN Cam-making machines. Sales and Technical Specification
Catalogue.8 pages.
P110T PETERMANN Trois catalogues 1) Machine Semi-Automatique a Fraiser les Carres 2 pages: 2) Machine Automatique a Fraiser Les Carres Avec Charger 4 pages: 3) Machine Reprendre 8 pages.
P150 Pfauter No.000, No.00, No.1, No.2 and No.4 Gear Hobbing Machines from the 1930s onwards mounted on a cast-iron plinth. five Sales & Technical Catalogue with sectional drawings of the whole machine and ones for the Hobbing Head, Index Drive,
Gear-mounting Units and Collet Attachment. Comes with a separate 4-page Catalogue for the Cross-feed Attachment. 52 pages in total.
P200 Pinacho (Antonio Pinacho) AP-180 lathe. Sales and Specification sheet. 2
pages.
P300 PINONDO Shapers. Full-range Sales & Technical Specification Catalogue. English, French, German and Spanish text. 6
pages.
P350 Pioneer Watchmakers' Lathe Sales & Specification Catalogue. 4 pages.
P415
PITTLER - Leipziger Werkzeug-Maschinen-Fabrik. The Ultimate Pittler
Catalogue. GERMAN and ENGLISH TEXT. 56 pages.
P415A P
ITTLER - WORKSHOP PRACTICE on the PITTLER by George Adams. An invaluable
original publication detailing every aspect of how to use the lathe - but no
illustrations. 56 pages.
P415C PITTLER: a set of three Catalogues - which some duplication of content -
that covers the complete range of traditional Pillar lathes and their many interesting
accessories:
1) All-Models Catalogue Circa 1900. Descriptive Price List, Screwcutting,
Spiral Cutting and division charts for the Pittler Universal Milling and
Turning Lathes Models B and C. This edition by Pittler themselves, not the more
common publication by their agents, George Adams. 60 pages.
2) All-Models Catalogue 1899 28 pages.
3) All-Models Catalogue and Descriptive Price List of W. V. Pittler's
"Milling and Turning Lathe". 36 pages.
P415D All the above classic Pittler literature as one package.
P415F PITTLER - Revolver - Drehbank. A remarkable Pittler
capstan lathe with its turret disposed vertically between the bed ways. The
maker's workshop manual - profusely illustrate; German text .. 50 pages.
P415G PITTLER Pifat 250 and Pidofat 250 Single and Twin Spindle Automatic
lathes. Sales and Technical Specification Catalogue. 24 pages.
P415H PITTLER Pidofat 251, Pimette 160, Pifat 160E, Adamat 6/42, PEF 140/6, NF
300, PS 26/6. Collection of Sales and Technical Specification Sheets. 28
pages.
P415J PITTLER Multi-Spindle Automatics Models PRC and PRCF. Detailed
Technical Sales and Technical Specification Catalogue. 48 pages. Sales
and Technical Specification Sheets. 28 pages.
P415K PITTLER Acme-Grindley Mehrspindle-Automaten fur Stangen-und
Futterarbeiten German-language Catalogue. Some imperfect pages. 44 pages.
P415L PITTLER HISTORY - 1889 to 1939 - a Well-illustrated Company publication showing
the growth of the organisation and development of the ordinary and capstan
lathes. GERMAN TEXT. 112 pages.
P425 POLEWOOD Wood lathes. Lathes section extracted from
General Catalogue Year 2003. 15 pages.
POLISH MACHINE TOOLS - these were exported from various manufactures using the
"POLMACH" and other "marketing" names: see also under ZTM,
POREBA, Andrychow
POLLARD Drills and Machine Tools: A vast collection of literature is available.
Please phone: 01298-871633 or e-mail your requirements to :tony@lathes.co.uk
P475 PORTASS Lathes: no manuals were ever issued but this is an interesting
collection of (rare) Sales and Technical Specification Sheets, Individual
Machine Catalogues, Illustrations, Accessories and "Letters of Recommendation".
Covers, amongst others, the X.L., Mark V, Model X. Dreadnought (several
versions including the 5-inch), Model S, Model 21/8", Model-de-Lux
21./8", Model Super, Heavy-duty 4-inch, Milling and Drilling Attachment,
shapers, 4-inch wood lathe, etc. 70 sheets.
P505 PORTER-CABLE (USA) Machine Tool Company: "Carbo-lathe"
Production Lathe. Sales and Technical Specification Catalogue. 8 pages
P505A PORTER-CABLE Production L in 9" x 14" and 9" x 20".
Lathe. Sales and Technical Specification Catalogue. 12 pages
P505B PORTER-CABLE Cone-head Tool Room Lathe 12-inch and 14-inch. Sales and
Technical Specification Catalogue. 8 pages
P521 POTTER (USA) Precision Bench Lathes (New York). Very rare Sales and
Technical Specification Catalogue with accessories. 36 pages.
P540 POTTS Universal Milling Attachment and Milling and Drilling Spindle,
Grinding and Milling Spindle, tailstock Turret, Saw table Attachment, Drill
Grinding Jig, Technical Sales and Technical Specification Sheet 6 pages.
P545 POTISJE Type PA lathes. Sales and Technical Specification Catalogue. 8
pages. . Includes a large copy of the (often damaged) screwcutting chart.
P550 PRAGA Surface Grinders (Jones and Shipman Licence) Sales and Technical
Specification Catalogue. 4 pages.
P624 PRATT and WHITNEY - see below and also the Niles-Bement-Pond entry
above. - - -
P625 PRATT and WHITNEY (USA) Wonderful full-range Catalogue dated 1897.
Lathes, millers, drills, grinders, etc. (small format) 399 pages.
P625A Pratt and Whitney Precision Machine Tools, Lathes, Jig Borers, Millers,
Grinders, etc: full-range Catalogue, 1928. 140 pages.
P625B Pratt and Whitney Precision Bench Lathes: Sales and Technical
Specification Catalogue 11 pages.
P625C Pratt and Whitney Model C Precision Bench Lathes 7-inch and 10-inch:
Sales and Technical Specification Catalogue. 16 pages.
P625D Pratt and Whitney Model C Precision Screwcutting Toolroom Lathes
12-inch, 14-inch and 16-inch Models. Sales and Technical Specification
Catalogue circa 1948. 24 pages.
P625E Pratt and Whitney Precision Bench Miller No.3: Sales and Technical
Specification Catalogue. 4 pages.
P625F Pratt and Whitney Model 10-inch Screwcutting Toolroom Lathe. Sales
and Technical Specification Catalogue. 4 pages.
P625G Pratt and Whitney Model B Screwcutting Toolroom Lathes: Catalogue. 17
pages.
P625H Pratt and Whitney Model 1E Jig Borer. Sales and Technical
Specification Catalogue. 2 pages.
P625H Pratt and Whitney Full-range Catalogue 1920s with jig borers, grinders,
precision and engine lathes, milling machines, centring machines, die sinkers,
drills, deep-hole drillers, profilers, vertical shapers, small tools and
gauges, etc. 164 pages.
P625J Pratt and Whitney & Niles Bement Pond Arsenal Equipment. A 44-page extract from several Full-range Catalogus spanning 1900 to 1930 that shows gun barrel and tube drilling machines, gun barrel drill grinder, gun barrel and tube reaming machines, gun barrel rifling machines, gun barrel chambering machine and a pistol rifling machine. 44 pages.
P625K Pratt and Whitney Jig Borers No.1 and No.2. Detailed Sales, Technical Specification & Accessories Catalog. 36 pages.
P746 PRECISE (USA) High-speed Precision Milling Machine.
Sales and Technical Specification Catalogue. 10 pages.
P746A Precise Products Corporation USA. Detailed, beautifully-illustrated All-Models Sales & Technical Specification Catalogue covering the High R.P.M.
Milling Machines Model 1 and Model 2 in all their forms; the "Autodrill" air-hydraulic drilling machines;
the Electric Jig Grinder; hand-held and stand-mounted "Grinder Millers" and their various mounts and wide
accessory range; the "Universal Power Quills"; the Super Cycle Power Quills and the vast range of High-speed
steel to diamond cutters. 110 pages. .
P750 PREMA No. 01 275 mm stroke Shaper. Sales and echnical Specification
Catalogue. 4 pages.
P750A PREMA No. 04 19-inch Shaper. Sales and Technical Specification
Catalogue. 6 pages.
P755 PREMO Lathe (5.5-inch centre height) Australia. Sales and Technical
Specification Catalogue. 4 pages.
P758 PRINCIPE Lathe 300 mm centre height. Sales and Technical Specification
Catalogue. Italian text with English translation of the main specifications. 8
pages.
P759 Progress Drills - all smaller types. A set of detailed catalogues for the No. 16, No. 16S, Junior 3/8", Junior 1/2",
Junior 1/2" Pillar, No.0 (1/4" capacity),No.1 and No. 1S early, No.1 and No. 1S late, 2g, 2GS and 3A. 26 pages
P760 PROGRESSIVE (and PROGRES) LATHES (Belgium) A set of Sales and
Technical Specification catalogues covering early versions (with no Model
Numbers) together with specific detailed Sales and Technical Specification
Sheets for the: P420, P535, P545, P680. 18 Pages.
P768 Promecan Press Brakes: two catalogues one early showing the original machines and a late edition with
comprehensive details of all 28 types from 25 to 400 tons and early CNC types. Excellent details of their mechanical specification, capacity and well-illustrated explanations
of their design and how they work. 50 pages
P775 PROXXON (Toyo, Sakai and Record) ML360 and ML210 lathes and MA-360
and MA-210 Milling Attachments and Accessories Technical Sales and
Technical Specification Catalogue. 12 pages.
P800 PRVOMAJSKA ALG-100 Universal Precision Milling Machine (Deckel Copy made
in CZ by Prvomajska). A set of 3 superb, well-illustrated Sales and Technical
Specification and Accessories Catalogues. 60 pages.
P800A PRVOMAJSKA ALG-200 Universal Precision Milling Machine (Deckel Copy made
in CZ by Prvomajska).Sales, Technical Specification and Accessories
Catalogue. 6 pages.
P800B PRVOMAJSKA G-O1B and G-O5B Knee-type Milling Machines. Technical Specification and Accessories
Catalogue. 14 pages.
P825/MP390C PULLMAX Universal Plate Worker: Detailed Technical Sales and
Technical Specification Catalogue. Not a manual but very useful in
understanding how a Pullmax works. Covers Models P1, P3, P5/2, P6, P8, P9, U10,
T6 and contains clear descriptions how the machines are used for: cutting, nibbling,
slotting, 4-way cutting, louvring, punching, beading, joggling, edge bending,
flanging, lock-forming, doming and the use of straight-cutting, circle-cutting,
spiral-cutting, outer-circle cutting and power-feed attachments.
P825A Pullmax Plate and Sheet Metal Workers. Range Catalogue covering: P1,
P5/2, P6, P8, P9, U10, T5, T6, R2, X8, F13G AND K50B. 16 PAGES.
P825B Pullmax Plate and Sheet Metal Workers. "What the Pullmax Can do" Early edition from 1953 showing the models
Major 2 and Models D3, P5, P3/2, AM and AL. Describes in detail the principles of operation, how to cut slots, louvres, figures, circles, straights,
folding or joggling, nibbling, doming, cutting to a template. Describes, cutting tools, power-feed attachment. 32 pages.
how Pullmax machines are manufactured.
P825C Pullmax P13, P200, P201, P202, P203 & P204 Universal Plate Cutting & Working Machines. Sales & Technical Specification Catalogues. 5 pages.
P825D Pullmax BW-300 Slotting, Punching and Cutting Machine. Sales, Technical Specification & Accessories Catalogue. 4 pages.
P850 PULTRA Micro Lathes: early (1946 Catalogue No. CA.4) beautiful full-range
Catalogue with complete accessories listing (open-headstock models). 16
pages.£18
P850A PULTRA 10 Watchmakers' lathe. Very rare 4-page Sales and Accessories
Catalogue.
P850B PULTRA Micro Lathes Series 1750/1770 Lathes and Accessories Catalogue.
16 pages.
P850C PULTRA Micro Lathes Series 1750, 1770 and the larger Model 1590 lathes
and their Accessories. Includes details of the External and Radius
Miniature Grinding Machines. A very rare Edition. 20 pages.
P850C90 PULTRA 1590 Dedicated Sales Folder. Very rare. 4 pages.
P850D PULTRA Micro Lathes: Pultra Grinding and Milling Attachments Catalogue -
very rare edition. 8 pages.
P850E PULTRA Micro Lathes: Accessories Catalogue. 12 pages.
P850F PULTRA Micro Lathes. All 7 of the above Pultra lathe-related items.
P850G PULTRA Grinding Machines Types 1970 External and 18CS Radius. Sales 7
Specification Catalogue. 4 pages.
P850H Pultra Price List 1962 - the full range of lathes, grinder and a complete
accessory list.8 pages.
P900 PURCELL Comprehensive Catalogue Collection covering the: Visby, New Visby
in Mk.1, Mk.2 and Mk.3 types, the "Record", Conehead (and
geared-head versions), Heavy-duty 10.5 and 12.5 industrial lathes and the
4.5" South Bend Clone. 56 pages.
Q400 QUALOS 4-inch Junior Lathe (Australia) Sales and Technical Specification
Catalogue. 4 pages.
R4 RAGLAN "Little John": Sales and Technical Specification
Catalogue (early) 4 pages.
R4A Raglan "Little John": Catalogue. 15 pages.
R4B Raglan "Little John": Sales and Technical Specification
Catalogue 4 pages.
R4C Raglan "Little John" Capstan: Sales and Technical Specification
Catalogue 6 pages.
R4D Raglan Test-Piece Turning Lathe: Sales and Technical Specification Sheet
4 pages.
R4E Raglan Vertical Miller: Works A3 sectional drawing 1 pages.
R4F Raglan "Five-inch" Lathe: Sales and Technical Specification
Catalogue 6 pages.
R4G Raglan "Five-inch" Lathe Accessories: Sales and Technical
Specification Catalogue. 4 pages.
R4H Raglan Wood Turning Lathe. Sales and Technical Specification Catalogue. 4
pages.
R4J Raglan "Loughborough" Training Lathe. Sales and Technical
Specification Sheet. 2 pages.
R5 All the above Raglan Sales and Technical Specification Literature.
R100 RALEIGH 8-inch CAPSTAN LATHE (Australia). Sales and Technical Specification
Sheet. 1 Page
R90 RAHN-LARMON Extension Gap Bed lathes. Sales and Technical Specification
Catalogue. 4 pages.
R100 RAMBAUDI MILLERS V2, M2, M3, MG2, MG2-U, MG3, MG3-U, Mo, MU, MS2, MS2-U,
MS3, MS3-U, FCR-3, FCR-FGR, FUR, FOR, FVR, MUR60, MUR60-U, UR60, UR60-U, V2,
M2, MG2, MS2, Dividing Heads, Tooling, Special Accessories: Detailed Sales
and Technical Specification Catalogue. 52 pages.
R100A RAMBAUDI VERSAMILL 12. Detailed Sales and Technical Specification
Catalogue.14 pages.
R100B RAMBAUDI MILLERS UR60 and FVR millers basic specification sheet. 2 pages,
R100C RAMBAUDI Rammatic 450, 500, 600, 800 Copy Milling Machines. Sales and
Technical Specification Catalogue. 32 pages.
R100D RAMBAUDI RU800 Universal Milling Machine. Sales and Technical
Specification Catalogue. 12 pages.
R100E RAMBAUDI FVR Vertical Milling Machine, VRG-2 and VRG-3 Turret Vertical
Milling Machines, FCR-2 and FCR-3 Ram-head Vertical and Combined Horizontal
Milling Machines, VR-3 Ram-head Milling Machine, UR-60 Milling and Boring
Machine, VSR-2 and VSR-3 Ram-head Vertical and Combined Horizontal Milling
Machines, FUR-2 Universal Milling Machine and FVR-3 Vertical Milling Machine.
Sales and Technical Specification Catalogue. 22 pages. R100F RAMBAUDI General
Catalogue showing the range of millers: V3, V3-P, M3, MS3, MS3-P, MO, KT, KV,
KTV, KO, KTVO, KVO, KTO, Rammill10, Rammill 15, Rammill20, Versamill Rammille,
Eammatic E, Ramcop, Miniram NC, Rammill NC, Versamill 12NC, Rammatic NC and
Minimatic. 20 pages
R100G RAMBAUDI Rammatic "DIGITRACE" Milling Machines. Sales and
Technical Specification Catalogue. 20 pages.
R100H RAMBAUDI V-Series Milling Machines. Detailed and well illustrated Sales
and Technical Specification Catalogue. 16 pages.
R100J RAMBAUDI M-Series Milling Machines. Detailed and well illustrated Sales
and Technical Specification Catalogue. 16 pages.
R130 RAMBOLD Super Precision Centre and Turret Lathe: Sales and Technical
Specification Catalogue 4 pages.
R136 RAMO OKK (OKK-RAMO) Models T-37 Lathe. Sales and Technical Specification Catalogue with details of how this interesting lathe could be set up for various jobs. 4 pages
R140/MR56 RAPIDOR Hacksaws 6", 8", 10" and 12". Spare
Parts Manual as Drawings. Includes 16 individual Sales and Technical
Specification Catalogues from the 1920 to the 1970s showing virtually the
entire range of the company's regular models and representing the complete data
set for this manufacturer. 64 pages.
R140C RAPIDOR (Manchester Rapidor) Precision Jig Sawing and Filing Machine.
Sales and Technical Specification Sheet. 2 pages.
R145 RASKIN Presses. All-models detailed Sales and Specification Catalogue.
128 pages.
R148 RAVENSBURG Model K Lathes - all types. Detailed Sales and Specification
Catalogue. German text. 14 pages.
R148A RAVENSBURG Model P Lathes - all types. Detailed Sales and Specification
Catalogue. German text. 18 pages.
R148B RAVENSBURG Facing Lathes. Sales and Specification Sheet. English text.
4 pages.
R148C RAVENSBURG Slotters Models S200, S300, and S500. Sales and
Specification Catalogue. English text. 6 pages.
RECORD metal-turning lathes, Australia. See under PURCELL above.
R150 Redman Lathes & Planers. Detailed cataogue, circa 1920, showing the companies lathes from 6.5 to 12.5-inch centre height and planers from 2-feet x 6-feet to 3-feet x 8-feet. 40 pages.
R152 RED-RING (Precision Gears and tools Ltd) All-Products Catalogue. Covers:
Gear Grinding, Gear Shaving, Gear Honing and Gear Inspection Machines. Gear
Inspection Machines, etc. Beaver Ball Screws and splines and other products.
Beautifully illustrated with detailed text. 120 pages.
R156 REED (F.E.Reed USA) Full-range Lathe Catalogue dated 1904. Profusely
illustrated 102-page publication with superb engravings showing all the
ordinary and special lathes manufactured by the company from light,
Amateur-type foot-power models through standard engine types to specialised
wood, Stud and Bolt, Gun Barrel and Swing Forming models, etc. 102
pages.
R160 REED-PRENTICE Lathes Catalog Collection
12-inch Toolroom Lathe (1930s to 1940s) 4 pages.
Model B 14-inch Precision Toolroom Lathe (1930s to 1940s) Red Cover 6 pages.
Model B 14-inch Precision Toolroom Lathe (1930s to 1940s) Blue Cover with different content to red-cover edition 6 pages.
Model A 16-inch Toolroom Lathe (1930s to 1940s) Orange Cover 6 pages.
Model B 16-inch Toolroom Lathe (1930s to 1940s) Red Cover 6 pages.
Model AA 16-inch Toolroom Lathe (1930s to 1940s) 6 pages.
Model 20-inch Toolroom Lathe (1930s to 1940s) 6 pages.
Model 20-inch Toolroom Lathe (1930s to 1940s) different content to 20-inch catalog. 6 pages.
Model Drum-Turning Lathes. 6 pages.
52 pages in total
R160S REED-PRENTICE Die casting Machines. Sales Sheet 4 pages.
R160T REED-PRENTICE No. 2V and No. 3VG Vertical Milling Machines. Sales and Technical Specification Catalogues. 12 pages.
R160V REED-PRENTICE No. 12V, No. 22V and No. 22VS Milling Machines Sales and Technical
Specification Catalogues. 18 pages.
R160Z REED-PRENTICE No. 5 Jig Borer. Sales and Technical Specification
Catalogue, Sales and Technical Specification Proposal Letter and Price List.
1942. 17 pages.
R170A REID GRINDERS (USA) "Reid-o-Matic" Model 824/PF Surface
Grinder. Sales and Technical Specification Catalogue. 4 pages.
R170B REID GRINDERS (USA) Model 618 Hand-feed "Rollerway". A detailed and well-illustrated
6-page Sales & Technical Specification Catalogue.
R173 REIDEN T185 Lathe. Sales and Technical Specification Catalogue. 4 pages.
R173A REIDEN R200 Lathe. Sales and Technical Specification Catalogue. 6
pages.
R173B REIDEN T200 Lathe. Sales and Technical Specification Catalogue. 6
pages.
R173C REIDEN S250 Lathe. Sales and Technical Specification Catalogue. 4
pages.
R175 REINECKER Lathes. Full-range Catalogue circa late 1920s early 1930s. 86
pages.
R175A REINECKER Grinding Machines. Full-range Catalogue circa late 1920s early
1930s. 116 pages.
R175B REINECKER Gear-cutting Machines and Special Machine Tools - Duplex Head
Millers, Slot Milling Machines, Double Spindle Cylinder Boring Machines, Can
Forming and Profiling Machine, Cam Copying machine, Twist Drill Manufacturing
Machine. Catalogue circa late 1920s early 1930s. 120 pages.
R175C REINECKER Milling Machines - Universal, Plain, vertical, Horizontal,
Plano-milling. Full-range Catalogue with accessories. Circa late 1920s early
1930s. 147 pages.
R175D REINECKER Full-range Catalogue: Milling machines, Drills; Plano milling
machines; Gear cutting machines; Tool-grinding machines; Universal, internal,
face and surface grinding machines; Lathes screwcutting; Relieving and
tap-making lathes; Special machines for auto car, motor, locomotive industries
and railway repair shops, etc.; Tools for thread cutting, drills, reamers,
chucks, measuring instruments, milling cutters of all kind; circa late 1920s
early 1930s. 202 well-illustrated pages. Text in English, German, French and
Russian.
Other, modern Reinecker catalogues also available
R180 REINEN "WALTER" Universal Diving Heads
UTA-80N, UTA-100E, UTA-125N, UTA-150E, UTA-160N, UTA-200E, UTA-200N, UTA-250E
and UTA-320N. 4 pages.
R181 ROSSETTI Renato Shapers (Limatrice) Models R.R.E.370, R.R.E.470 and R.R.E.620 (Limatrice con Cambio a 4 velocita e Frizone) Sales Catalogues (Catalogo di vendita) English and Italian text. 12 pages
R182 REX Hacksaws Models "Light", 6.5M, 7.5-inch and 10-inch.
Detailed sales and specification Catalogues. 16 pages
R185 REXVALTER Lathe Model VF-118. Sales and Technical Specification and
Specification Leaflet. 2-pages.
R190 RHODES (USA) Combination Shaper and Slotter. Sales and Specification Catalogue. 4 pages.
R190A RHODES (USA) RH Open Front Presses. Booklet giving technical specification and
details of the 25 tp 300 ton models. 23 pages.
RICHARDS of Manchester Boring Machines- other catalogues in addition to those
listed below are also available.
R200 RICHARDS (of Manchester) Full-range Catalogue. 170 superbly-illustrated
pages of Horizontal borers, Vertical Boring and Turret Mills, Vertical Slot
Drilling and Keyway Cutting Machines and Side Planing Machines, etc.
R200A Richards (of Manchester) Vertical Boring and Turning Mills. Beautifully
Illustrated and detailed Sales and Technical Specification Catalogue. 55
pages.
R200B Richards (of Manchester) Double Standard (twin column) Vertical Boring
and Turning Mills. A later edition, beautifully Illustrated and detailed
Sales and Technical Specification Catalogue. 48 pages.
R200C Richards Boring Machines "PR" Type. Sales and Technical Specification
Catalogue. 70 pages.
R200D RICHARDS- (of Manchester) Heavy-duty Spiral Electric Planing Machines.
Superb Photographs of some very large machines. Sales and Technical
Specification Catalogue. 20 pages.
R200E RICHARDS (of Manchester) BORING, MILLING, DRILLING and TAPPING MACHINES.
Full Range Catalogue. 70 pages.
R200F RICHARDS (of Manchester) Horizontal Boring Machines Accessories Catalogue showing all the attachments for their traditional models. 24 pages.
KEARNS and RICHARDS - See under KEARNS
R215 Richmond (Midgley and Sutcliffe England) Complete Product Range
Catalogue for the Company's Milling machines including Plain and Universal
versions of the No.1, No.3, OS3D and No. 4, the No. 5 production miller, the
No.3 vertical, the No. 5 Vertical, the Turret-head miller, the Universal
"Hyspeedmil" attachment, Milling Machine Accessories Catalogue, the
Dividing Head Catalogue and Radial Arm Drilling Machines Catalogues. 110 +
pages. Individual model catalogues also available - see below.
R215A RICHMOND Series 0 No. 01, 02 and 03 Plain and Universal Milling machines:
Sales and Technical Specification Catalogue. 2 editions, slightly different.
8 pages. These early millers can be recognised by their round-bar overarm and, on the right-hand face of the colum, two quadrant-type spindle-speed selector levers.
R215VM1 RICHMOND VM1 Vertical Milling Machine. Sales & Technical Specification Catalogue. 4 pages.
R215B RICHMOND No. 2 Plain and Universal Milling Machines: Sales and
Technical Specification Catalogue. 8 pages.
R215C RICHMOND No. 3 and No. 03SD Plain Horizontal, Universal and Vertical
Milling Machines: Sales and Technical Specification Catalogues. 32 pages.
R215D RICHMOND No. 4 Plain and Universal Millers: Sales and Technical
Specification Catalogue. 16 pages:
R215E RICHMOND 14-60 Plain Horizontal, Universal 7 vertical Milling Machines.
Sales and Technical Specification Catalogue. 16 pages:
R215F RICHMOND TURRET MILLING MACHINE: Sales and Technical
Specification Catalogue. 8 pages:
abwood
R215G RICHMOND Milling Machine Accessories including Universal Dividing Heads,
Vertical Heads: Sales and Technical Specification Catalogue. 16 pages:
R215H RICHMOND RADIAL ARM DRILLING MACHINES Models: Herald, Envoy,
Consul, SR1, SR2, SR3, HB3/12, HB4 and HR10 Collection of Sales, Technical Specification and Accessories Catalogues.
54 pages:
R220 RIGIVA (RIVA) Full-range Sales and Technical Specification Catalogue - English and Italian text.
Horizontal, Vertical and Turret Millers dated 1968 showing the U.2, U.6, U.8,
U.20, V.2, V.4, V.6, V.20, V.20-P and the 0.2,0.6,0.8,0.20 etc with plain,
non-swivelling tables), Autocycle V.20, Autocycle 0.6, Numerical control V.100,
S.8 Diesinker, V.6C and V.20C with hydraulic copying, Model S.G.A.
Geometrically Shaped Dies Milling machine, 0.8-BA with powered overarm, 0.20-BA
with powered overarm, C.400 cam milling and cam grinding machine, F.1200,
F.1600, F.1700, F.2000, G1200, G.1600, G.2000, C.D., C.A, P.T.2, specialist
machines for the textile industry and a range of dividing heads, rotary tables,
rack dividing attachments, vertical heads, special vertical heads, slotting
heads, boring heads, worm and gear-cutting attachments, machine vices,
compound tables, inclinable tables, optical readers, cutters, cutter holders, worm-screw
cutting dividing head, hob milling attachments, bevel gear attachments, etc. 51
pages.
R220A RIGIVA (RIVA) Full Range (conventional machines) Sales and Technical
Specification Catalogue dated 1956. Horizontal, Vertical and Turret Millers
Types: U.6, U.8, U.20, V.20, V.20b and C400. Accessories, vertical heads, etc.
18 pages.£37
R220B RIGIVA (RIVA) U.2 Universal (horizontal with swing table) and 0.2 plain
Milling Machines (table 800 x 200 mm). Sales and Technical Specification
Catalogue. 8 pages.
R220C RIGIVA (RIVA) U.6 Universal (horizontal with swing table) and 0.6 plain
Milling Machines (table 1100 x 250 mm). Sales and Technical Specification
Catalogues - two editions, early and late (late models have 1100 mm table and
built-n table power-feed motor). 16 pages.
R220D RIGIVA (RIVA) V.6 Vertical Milling Machine (table 1200 x 300 mm). Sales
and Technical Specification Catalogue. 8 pages.
R220E RIGIVA (RIVA) U.8 Universal (horizontal with swing table) and 0.8 plain
Milling Machines (table 1300 x 300 mm). Sales and Technical Specification
Catalogue. 8 pages.
R220F RIGIVA (RIVA) U.20 and 0.20-BA Universal horizontal (and U.20 swing
table) Milling Machines (table 1500 x 350 mm). Sales and Technical
Specification Catalogue - in English, French, Italian and German. 22 pages.
R220G RIGIVA (RIVA) V.20 Vertical Milling Machines (table 1500 x 350 mm). Sales
and Technical Specification Catalogue. 10 pages.
R220H RIGIVA (RIVA) U.30 Universal (horizontal with swing table) and 0.30 plain
table Milling Machines (table 1600 x 400 mm). Sales and Technical
Specification Catalogue. 8 pages.
R222 RINDIS Universal machine Tool. Two well illustrated and detailed Sales
and Technical Specification Catalogues that shows the many and varied set-up
possibilities. 10 pages.
R225 RISHTON Vertical Miller/Driller: Full-range Catalogues. 18 pages.
R66 RIVETT Catalogue 1894. A superb production showing the Nos. 3 and 4 bench
lathes - and a vertical miller. 34 pages.
R66A Rivett All-models Catalogue dated 1898. Shows Millers, Grinders and Lathes
both Watchmaker and Precision Bench Types Numbers 3, 4, 5 and 8-inch. Includes
watchmaking accessories and lathe drive systems. 106 pages.
R66B Rivett All-models Catalogue dated 1901. Shows Millers, Grinders and
Lathes. 100 pages.
R66C Rivett All-models Catalogue Circa 1903 - 1910 Rivett Lathes Models No.
31/2, No. 4, No. 5 and "8-Inch Precision". 106 pages.
R66D Rivett "General Bulletins No. 500D, 500E and 500F". Three
catalogs with details of the 715, 918, 608, 1020R and 1024S lathes and the
84, 104, 112, 1024 grinders and Accessories. 32 pages.
R66M Rivett 505 Plain Precision Bench Lathe Detailed Sales and Technical
Specification Catalogue. 12 pages.
R66N Rivett 507 "Junior" Bench Lath Sales and Technical
Specification Catalogue. Such detailed information that it might be regarded as
an Instruction Manual. Headstock bearing adjustment instructions, screwcutting
charts, dimensions of stands, use of accessories illustrated, etc. 44 pages.
R66E RIVETT 608 (USA) Workshop Manual and Instruction Manual. Army Issue
Publication - Covers every aspect of the lathe and its use. Also applies, in
general terms, to the earlier and similar 8-inch Precision. 140 pages.
R66F RIVETT 608 Sales and Technical Specification Catalogue with 6-page price
list (1944 edition). A Superb copy from a mint condition original.
R66FF RIVETT 608 Sales and Technical Specification Catalogue. 3 Editions of
average-condition publications showing the lathe in its mid 1940s
specification. 75 pages.
R66G Rivett 608 "Blue Prints" sectional drawing and assembly - 18
sheets.
R66H Rivett 608 Standard, Special and Metric Screwcutting Charts for Gearbox
and Non-gearbox Lathes. 4 sheets
T66z Rivett 715 Lathe Catalog. 12 pages.
R66J Rivett 1020S Lathe Precision Toolroom Lathe: Catalogue.
R66K Rivett 1020S: 40 sheets of blue-prints scans and electrical data to
CD-ROM only.
R66L Rivett 1020s: Basic operating Manual (9 sheets) plus the useful Sales
and Technical Specification Catalogue. Scan to CD-ROM or print.
R66P Rivett 918 "Cabinet Lathe" Sales and Technical Specification
Catalogue. 20 pages.
R67 All the above Rivett publications on a pen drive or as
high-quality prints.
R90 RIVETT GRINDER Model 1024 Universal. Sales and Technical Specification
Catalogue. 13 pages..
R95 Rivol Lathes. Sales, Technical Specifcation & Accessoris Catalogues set for the Models 150 and 180; 200RP; 250RL and 300RL; 300RP and 350RP; 400; 500; 500RP; 600RP; 700RP and 800RP.
All with English, French, German and Italian text. 52 Pages.
R100 ROBINSON of Rochdale. Woodworking machinery. All-Models Sales Book
"Modern Woodworking Machinery" circa mid 1950s showing machines as made from
the 1940s to the 1960s. 165 pages with photographs and full specifications of
every machine made.
R232 ROBOT Lathe. Sales and Technical Specification Catalogue. 8 pages..
R234 ROCKFORD Millers (USA). Circa 1900: Sales and Technical Specification
Catalogue for the Hand Millers Nos. 2 and 3 and Accessories. 6 pages.
R234A Rockford Millers No. 1 Plain with power feed through overarm. Circa 1900
Sales and Technical Specification Catalogue. 4 pages.
R234B Rockford Miller No.2 Light Universal Miller. Circa 1900 Sales and
Technical Specification Catalogue 4 pages.
R234C Rockford Miller No.2C Universal Heavy Duty. Circa 1900 Sales and
Technical Specification Catalogue. 4 pages.
R234D Rockford (Rockford Lathe and Drill Company) Catalog 1920: 12-inch,
14-inch, 18-inch and 22-inch lathes. 7 pages.
R234E Rockford "Economy" lathes (USA) 12", 14" and 16"
Sales and Technical Specification Catalogue (2 different versions circa late
1930s and early 1940s) 10 pages.
R234F Rockford General catalog 1956 including details of the last version of
the "Economy" lathe and the company's hydraulically powered ram-type
shapers, conventional and open-sided planers, a combination Shaper-planer,
slotters and the “Kopy-Kat” duplicator. 6 pages.
R234G ROCKFORD - Factory bound volume of 1936 of pictures showing the shapers,
planers and slotters. 36 pages.
R235 ROCKFORD (Fenland Engineering, USA) Vertical Turret Miller Sales and
Technical Specification Catalogue circa 1950s 4 pages.
R240 ROCKWELL Woodturning Lathe Model 4-11. Sales and Technical Specification
and Accessories catalog. 4 pages.
R240A ROCKWELL Woodturning lathe Model 46-395. Sales and Technical
Specification catalog. 4 pages.
R240B ROCKWELL (DELTA ROCKWELL) Full-range Machine Tool Catalogue 1974 (Cat.
AD-2550) giving full details and specifications of: Lathes and Accessories,
Milling Machines and Accessories, Saws, Drills and Accessories. 20 pages.
R240C ROCKWELL (DELTA ROCKWELL) Superb Full-range Machine Tool Catalogue 1969
(Cat. AD-1755R) giving full technical details and specifications of: Lathes
(10", 11" and 14" and Hand-Screw), Lathe Accessories,
Milling Machines (vertical and Horizontal) and their Accessories, Toolmaker
Grinder and Accessories. 48 pages.
R240D ROCKWELL (DELTA ROCKWELL) Superb Full-range Machine Tool Catalogue 1963
(Cat. AD-1177) giving technical details and specifications of: Lathes and
Accessories (10", 11" and 14" and Hand-Screw), Milling
Machines (vertical and Horizontal) and Accessories, Toolmaker Grinder and
Accessories. 32 pages.
R240E ROCKWELL (DELTA ROCKWELL) Superb Full-range STATIONARY POWER TOOLS
Catalogue 1966 (Cat. AD-1752): 110 pages.
R240F ROCKWELL (DELTA ROCKWELL) Full-range Catalogue 1963 giving full technical
details and specifications of: Lathes (10-inch, 11-inch, 14-inch, Hand-screw)
and Vertical and Horizontal Milling Machines and Accessories. 32 pages.
R240G ROCKWELL DELTA Lathes Catalogue 1959. 10-inch, 11-inch
and Hand Screw Lathe. 20 pages.
R240H ROCKWELL (DELTA ROCKWELL) Full-range General Catalogue "Industrial
Tools" 1951 (Cat. AB-51): A vast range of Woodworking machines of all
types, Drill Presses, Metal and Wood Shapers. (not lathes) 64 pages.
R240J ROCKWELL DELTA Turret Vertical Milling machine. Sales and Technical
Specification Catalogue. 4 pages.
R247 RODNEY MILLING ATTACHMENT as used on Myford, Boxford and other small
lathes. Sales and Technical Specification Sheet. 2 pages.
R249 ROKU-ROKU RUM-5 Ram-type Milling Machine (Huron design with multi-angle head). Sales, Technical Specification and Accessories Catalogue. 8 pages.
R249A ROKU-ROKU All-Models Catalogue showing the printed Circuit Board drilling machine RPD-2, RPD-4 and RPD-6. The general-purpose drilling machines RND-1003, RND-1005/3AX,
RND-1503, RND-1505/3AX, and DND-1311/5. The Auto Tool Changing NC-controlled General-purpose Drilling Machine RND-1005/ATC. The Machining Centre RMC-1005/ATC.
NC-controlled Jig Drilling Machines JND-55, JND-510, JND-55 (2-spindle).
The Roku-Roku-Nagase3 SG-612 Surface grinder and the Roku-Roku-Seiko VSS-501 Variable-speed drill. 8 pages.
R250A ROLLO Catalogue Collection consisting of:
Supreme 800 lathe. Combined basic maker's Instruction manual
and Catalogue Set. 18 pages.
Rollo Combi Machine - lathe, miller, drill Catalogue and a small Rollo Company
Catalogue. 8 pages.
Rollo R.A.S.C and R.E.M.E. Lathe. Sales and Technical Specification
Catalogue. 4 pages.
ROLLO ELF: Sales and Technical Specification Catalogue (round bed, Sturmey
Archer gearbox model). 4 pages.
ROLLO "Supras" Lathe. Sales and Technical Specification Catalogue.
4 pages
ROLLO "Dominie" Lathe. Sales and Technical Specification Catalogue. 4 pages
ROLLO "Facsimilathe" Lathe. Sales and Technical Specification Catalogue. 4 pages
ROLLO Model 70 Pillar Drilling Machine. Sales and Technical Specification Catalogue. 4 pages
ALL the above Rollo Literature
R252 ROSCHER and EICHLER WEST (Eichler and Co.) Milling Machines Types
FV-11, FV-11a, FV-111, FV-111a, FV-1Va, FV-Va, V-111 and V-1V. Detailed Sales and
Technical Specification Catalogues. English text. 24 Pages.
R252A ROSCHER and EICHLER WEST (Eichler and Co.) Milling Machines Types
FE-0, FE-1, FE-1A, FE-11, FE-111, FE-111S, FE-1VS, FE-Vs, FU-0, FU-1, FU-1a,
FU-11, Fv-11, FU-111s, FV-111s, FU-1Vs, FU-1Vs, FU-VS and FU-VS . General
Specification Catalogue. French and German text. 8 Pages.
R255 ROSENFORS Lathes RL-8h, RL-8M, RL-10H and RL-10M. Sales and Specification
Catalogue. 7 pages.
R255A ROSENFORS Lathes RS-20, RS-20S, RS-25 and RS-30F. Sales and
Specification Catalogue. 15 pages.
R255B ROSENFORS Milling Machines RFE, RFV-M, RFU, PARA-Mill 2 and PARA-Mill3.
Sales and Specification Catalogue. 14 pages.
ROSSI V0 Turret-head Milling Machine. Sales, Specification and Accessories
Catalogue. 7 pages.
R260 ROTEX (USA) Vertical Milling Machine Model VM Sales and Technical
Specification Catalogue and Price List 1963 4 pages.
R261 ROTEX (USA) Horizontal Bench Milling machine Model RM-1 Sales and
Technical Specification Catalogue and Price List 1965 4 pages.
Roth and Muller GMBH see under RUMAG Millers below.
R280 "Rothley" 6.5-inch Slotter (Distributed by
Thos. W.Ward). Sales and Technical Specification Sheet. 2 pages.
R280 Round Tower (Powerchannel Corp. Taiwan) Ram-head Milling Machine (Bridgeport Clone).
Sales & Technical Specification Catalogue. 6 pages.
R290 RUBIMA Shapers Formmaschine Hochleistungs-Schnellhobler RB105 Verkaufskatalog (Friedrich Rubischek Maschinfabrik Berlin) Sales Catalogue GERMAN TEXT. 4 pages.
R295 RUCOCO (Germany) "Super Rapid" Horizontal Hacksawing Machines. Models 1, 2, 3, 4 , 5 and 6. Sales and Technical
Specification Catalogue. 9 detailed pages.
R300 RUMAG RW-416-VG Precision Tool-Milling and Boring Machine. Sales and
Technical Specification Catalogue. 2 PAGES.
R300B RUMAG Millers Series 0 (smaller millers for Model and Experimental Engineers):
Models RF-0, RF-1, RF-415, RFV-415, REG, REVG, REVG-s, Sales and Technical
Specification Catalogue. 16 pages + 2-page sales sheet. Available with
English or German text
R300C RUMAG Millers Series 1 Models: REE-1B, REE-1A, RU-1B, RU-1A, REEV-1,
REE-1, RU-1-VK. Sales and Technical Specification Catalogue. 8 pages.
R300D RUMAG Miller Series 2 Models: RE-2G, RE-20G, RE-25G, RU-2G, RU-20G,
RU-25G, REV-2, REV-20, REV-25, RE-2VS, RE-20VS, RE-25VS, RU-2VS, RU-20VS,
RU-25VS. Sales and Technical Specification Catalogue. 8 pages.
R300E RUMAG Millers Series 3 Models: RE-30, RU-30, RV-30, RE-30VS, RU-30VS2:
Sales and Technical Specification Catalogue. 8 pages.
R300F RUMAG Turret Millers. Series Sales and Technical Specification
Catalogues Models RE-25VSA. 2 pages.
R300G RUMAG R-435 single Spindle Milling Machine. Sales and Technical
Specification Catalogues. 2 pages.
R300H RUMAG R-434 Double Spindle Milling Machine (two heads, one at each side
of the table). Sales and Technical Specification Catalogues. 2 pages.
R300J RUMAG RW-416-VG Precision Tool-milling-and-Boring Milling Machine. Sales
and Technical Specification Catalogues. 2 pages.
R300K RUMAG REE-1-VG Tool-milling-and-Boring Milling Machine (ram head with
conventional knee). Sales and Technical Specification Catalogues. 2 pages.
R300L RUMAG RE-25-VS-3ATool-milling-and-Boring Milling Machine. (ram head with
conventional knee). Sales and Technical Specification Catalogues. 2 pages.
R300M RUMAG RE-25-VS-3ATool-milling-and-Boring Milling Machine. (ram head with
conventional knee). Sales and Technical Specification Catalogues. 2 pages.
RUSNOK Millers (USA) Models 850 and Drills Catalogues (2). 8 pages.
R320 RYDER Lathes (Bolton, UK). Sales and Technical Specification Catalogue
circa 1905 43 pages.
R320A RYDER Low-speed, High-power Lathes (Bolton, UK). Sales and Technical
Specification Catalogue circa 1905 35 pages.
R320B RYDER Verticalauto Vertical Multi-spindle Automatic Lathes Nos. 6, 8 and 10. Sales and Technical
Specification Catalogue dated 1960.4 pages.
S2 SABCA (S.A.B.C.A) Model JRC2 Universal Precision Miller. Sales and
Technical Specification Catalogue. 4 pages. FRENCH TEXT.
S2A SACHMAN Model F.A.S 1000-500 Vertical Milling Machine (Fresatrice-Alesatrice Verticale). Sales & Technical Specification Catalogue.
English, French, German and Italian Text. 8 pages.
S2B SACHMAN Model S80 Vertical Milling Machine bed-type version (Fresatrice-Alesatrice Verticale). Sales & Technical Specification Catalogue.
8 pages.
S2C SACHMAN Model R Ram-head on an elevating column Vertical Milling Machine (Fresatrice-Alesatrice Verticale). Sales & Technical Specification Catalogue.
8 pages.
S3 SACIA Universal Machine Tool - Vertical and Horizontal Miller, Borer,
Drill, Slotter and Lathe Combination. Maker's Sales and Technical
Specification Catalogue. 6 pages.
SACM - see under GRAFFENSTADEN
3SAF SAFOP Lathes Types 'Leonard 3000 Facing', 'Leonard 1500 and 1500S Facing & Universal' and 'Leonard -40-TR Combination Lathe & Grinding Machine'.
SAG machine tools - see under GRAZIANO
S4 SAIMP RP-602 production Grinders. Sales and Technical Specification
Catalogue. 16 pages.
S4A SAIMP RCD Digital Controlled Grinding Machines Models RCD-U and RCD-P.
Sales and Technical Specification Catalogue (English or German text). 18
pages.
S4B SAIMP RCD/N Combination Straight and Angle Head Auto-step Grinder. Sales
and Technical Specification Catalogue. 6 pages .
S4C SAIMP Grinders R6, RCD, RO, RP,RC, RCOROC, RO500UI, ROO, Sales and
Technical Specification Catalogue. 12 pages .
S4D SAIMP Grinders Sales and Technical Specification Catalogue. 12 pages
S6 SAJO Series UF-44 and UF-48 Milling Machines. Four Sales & Technical Specification Catalogues showing
the UF-44 in Swedish and the UF-48, UF-48P, PF-49P, VRF-245 and UD-130 in English. 26 pages.
S6A SAJO Series 52 and 53 Milling Machines. Two Sales and Technical Specification Catalogues showing the
Types UF52, PF52, APF52, 52DM (Duo Mill) VF52 and UF53. 24 pages.
S6B SAJO 54 Series Milling Machines. Two Sales & Technical Specification Catalogues showing the Types UF54,
VF54P and 54DM (Duo Mill). 34 pages.
S6C SAJO 400, 450 and 400 Series Milling Machines. Two Sales & Technical Specification Catalogues showing the VBF-450,
HBF-450, BF-4-- Duo Mill, MC-500. 18 pages.
S6D SAJO BF-400, Duo Mill, VBF-450, HBF-450, MC500 Milling Machines. Sales & Technical Specification Catalogue. 18 pages.
S6E Sajo Milling Machine Accessories. Sales & Technical Specification Catalogue showing the Vertical Head Attachments,
Attachment Cranes, Dividing Heads, Rotary Tables, Rack-indexing and slotting, Attachments, Machine Vice, Optical Readers,
Milling Arbors and Mulit-feed stop. 16 pages.
S6F Sajo Millers Types DM400, VM450, HM450 and MC-500 NC-Controlled. Sales & Technical Specification Catalogues. 25 pages.
S6G Sajo Hacksaws Models RC30, RC45 and RC-230. Sales & Technical Specification Catalogues. 6 pages.
S6H Sajo Combined Woodworking Machine Type A1. Sales & Technical Specification Catalogue. 4 pages.
S6J Sajo HBF-400, DM-400, VM-450 and HM-450 Bed-type and Ram-head Milling Machines. Sales & Technical Specification Catalogue. 18 pages.
S6K Sajo VMC300, CNC400 & HMC600 CNC Milling Machines. Sales & Technical Specification Catalogues. 20 pages.
S6L Sajo 350 Plain, Horizontal, Vertical and Duo Milling Machines. Sales & Technical Specification Catalogues. 10 pages.
S8 SAKAI (Toyo, Record and Proxxon) ML360 and ML2210 lathes, MA-360 and
MA-210 Milling Attachments and Accessories Technical Sales and Technical
Specification Catalogue 12 pages.
S10 SANFORD (USA) Micro Surface Grinder. Sales and Technical Specification
Catalogue 6 pages.
S13 SATESA Lathes: Sales and Technical Specification Catalogue 4 pages.
S14 SAUPE Precision Bench Lathes. Sales and Technical Specification
Catalogue. 10 pages.
S15 SCHAERER "High-Duty Lathes" Type UN-450. Sales and Technical Specification
Catalogue. 16 pages.
S15A SCHAERER "Lathes for Toolroom, Production and Special Purpose" Models HK410 Automatic Copying, HPD Automatic Production and UD, UDA, PD, PDA, HPD500. Sales and Technical Specification
Catalogue. 4 pages.
S15B SCHAERER HPD 500 Semi-automatic production lathe. detailed Sales and Technical Specification Catalogue. 8 pages.
S15C SCHAERER 50th Anniversary Catalogue 1956. A beautifully produced, all-models publication that gives detailed technical information of the lathes types UD, UDA, PD, PDA, HPD, HK and Schaerer-Profil D9
together with examples of work on standard, production, copying and semi-automatic production models, accessories and special equipment. 50 pages.
S40 SCHAFFNER (USA) Bench Lathe Sales and Technical Specification Catalogue (General
Radial Drill Co. USA). 4 pages.
S50ENG SCHAFFNER (Switzerland) All with ENGLISH TEXT Milling Machines Catalogue Set Types F Comprising:
Model F7 Milling Machine 8 pages.
F17 Milling machine 8 pages.
Model F25 Toolroom Precision Milling Machine. 12 pages.
Models F7, F7-Pnl-Z, F7M, F17 General Descriptions. 4 pages.
S50ENGW SCHAFFNER (Switzerland) All with English Text. Milling Machines Catalogue Set Types W comprising: W6 horizontal Milling Machine 6 pages.
Model W12 Universal Vertical and Horizontal Milling Machine 6 pages.
Model W14 Universal Vertical and Horizontal Milling Machine 6 pages. All with ENGLISH TEXT.
S50FRN SCHAFFNER (Switzerland) All with FRENCH TEXT. Milling Machines Catalogue Set Types F Comprising:
Model F7 Milling Machine 8 pages and F17 Milling Machine 8 pages.
Models F7, F7-Pnl-Z, F7M, F17 General Descriptions. 4 pages.
S50GER SCHAFFNER (Switzerland) GERMAN TEXT. Milling Machines W7 and W7G Catalogue. 8 pages.
S50A SCHAFFNER (Switzerland) General Milling Machine Catalogue showing the F6,
F7, F17 and F25 Models 4 pages.
S50H SCHAFFNER (Switzerland) RIS400 and RIS600 Cylindrical and Universal Grinding
Machine. Sales and Technical Specification Catalogue. 6 pages.
S60 SCHARMANN FB85 and FB100 Horizontal Boring Machines. Detailed Technical
Sales and Technical Specification Catalogue. 22 pages.
S70 SCHAUDT Grinders. General Catalogue giving company background and details
of the: T3/U, T3/I. PF43, PF, PS, Range A, Range E, CF5. CS71, C502, G5 and FMS
models. 40 pages
S70A SCHAUDT PSA Grinder. Sales and Technical Specification Catalogue. 18
pages . 40 pages
SCHAUBLIN - Full-range Catalogues
S59 SCHAUBLIN Full range Catalogue 1933 Shows lathes (and their comprehensive
accessory range): SV-65, SV70, SV-90 and SV-102 in all their various forms. A
vast range of lathe accessories including countershafts and drive systems and
some items later dropped like the spiral-grooving accessory. Milling machines
SV-11 and SV12 and their accessories, drills, lapping machines, tapping
machines, grinding machines, tooth-rounding machines, rolling machines, gauges,
collets, stamps, etc. 86 pages. In three languages: English French and German.
S60 SCHAUBLIN Full range Catalogue 1938 (Catalogue 102/38) Shows lathes (and
their comprehensive accessory range): SV-65, SV-70, SV-90, SV-102, SV-102-VM,
SV-130, SV150 and the SV-9 cam lathe in all their various forms from precision
bench to capstan, Milling machines SV-11 and SV12 and their accessories. A vast
range of lathe accessories including countershafts and drive systems. Drills,
lapping machines, tapping machines, grinding machines, tooth-rounding machines,
rolling machines, gauges, collets, stamps, etc. Drills, compressors, lapping
machines, headstocks, slide rests, collets, stamps, etc. 80 pages.
S60A SCHAUBLIN: Full-range Technical Sales and Technical Specification
Catalogue 1946 (Catalogue G-36/46). Lathes and Milling Machines including
lathes: SV 65, SV 70, SV 102, SV 120, SV 102-VM, SV 120-VM. Milling machines SV
11-A, SV 11-B, SV 12, SV51, SV 52. Lapping Machines SV 220, SV560. Automatic
Tooth Rounding Machine SV 3, Semi-automatic Facing Machine SV 58, flat cam
finishing machine SV 9-A, Automatic Multiple Drilling Machine SV 15-BH.
Automatic Multiple Lapping Machine SV 16. High Precision Drills SV 22, SV 22S
and SV23. High Precision Tapping Machines SV 22T and SV 23T and Cutter
Grinding Machines SV 27 and SV28 and Accessories. 36 pages.
S60B SCHAUBLIN: Full-range Technical Sales and Technical Specification
Catalogue 1973 (Catalogue G20/73) Includes Interesting Factory pictures. 20
pages.
S60C SCHAUBLIN: Full-range Technical Sales and Technical Specification
Catalogue 1964 (Catalogue. 12/64 titled "Extract from our Manufacturing
Programme) 28 pages. Lathes, Milling Machines and Accessories. 20 pages.
SCHAUBLIN - 65 and 70 Catalogues
S61A Schaublin 65 and 70 Lathes. Full-range Sales Catalogue and Accessories
1953 (Catalogue. TR-TL 70/53). 24 pages.
S61B Schaublin 70 Lathes. Full-range Sales Catalogue and Accessories 1962
(Catalogue 70/62). 55 pages.
S61C Schaublin 70 Lathes. Full-range Sales Catalogue and Accessories 1971 (Catalogue
P70/71). 45 pages.
S61D Schaublin 70 Lathes. Full-range Sales Catalogue and Accessories 1983
(Catalogue. C70/83). 44 pages.
S61E Schaublin 70 Lathes. Full-range Sales Catalogue and Accessories 1995
(Catalogue. 70/95). 14 pages.
S61F Schaublin 70 Lathes Late Models Types 70-CF and 70 Mi-CF. Sales Catalogues and Accessories. 6 pages.
S61G Schaublin 70, 102, 225, 102Mi-CF, 102N-CF and 102N-VM-CF Lathes, Late Models. All 5 Sales and Technical Specification Cataloges issued for these models. 30 pages.
S61H Schaublin 70, 102, 225, 102Mi-CF, 102N-CF and 102N-VM-CF Lathes, Late Models. All 5 Sales and Technical Specification Cataloges issued for these models. 30 pages.
SCHAUBLIN - 90 and 102 Catalogues
S62 SCHAUBLIN: SV90 and SV102 lathes. Sales and Technical Specification and
Accessories Catalogue 1941 (Catalogue 102/41). Superbly-illustrated General
Catalogue showing the complete range of 90 and 102 Models and all the accessories
available during the 1940s and early 1950s. 80 pages.
S62A SCHAUBLIN SV-102 Toolmaker's Lathe. Sales and Technical Specification
Catalogue 1947 (Catalogue TO 102/47) 40 pages.
S62B Schaublin 102-VM Screwcutting Lathes. Superbly illustrated 1953 Sales
and Technical Specification and Accessories Catalogue 1953 (Catalogue No.
102-VM/53). 32 pages.
S62B Schaublin 102 Plain Lathes: Superbly illustrated full-range, all-model,
Technical Sales and Technical Specification Catalogue 1957 (Catalogue No.
102/57). Covers all the plain and screwcutting versions of the 102 lathes in
great detail and includes the entire and extensive accessory range. 84 pages.
S62C Schaublin 102N-HP Turret lathe: Technical Sales and Technical
Specification 1959 (Catalogue p-tr-102 hp/59). 4 pages.
S62D Schaublin 102 Plain Lathes: Superbly illustrated full-range, all-model,
Technical Sales and Technical Specification Catalogue 1966 (Catalogue No.
102/66r). Covers all the plain and screwcutting versions of the 102 lathes in
great detail and includes the entire and extensive accessory range. 75 pages.
S62E Schaublin 102HP lathe Technical Sales and Technical Specification
Catalogue 1970 (Catalogue TR-102-HP/70) 16 pages.
S62F Schaublin 102-VM Screwcutting Lathes. Sales and Technical Specification
Catalogue 1974 (Catalogue No. P-102-VM/74). 11 pages.
S62G Schaublin 102N Plain Lathes: Superbly illustrated full-range Technical
Sales and Technical Specification Catalogue 1979 (Catalogue No. 102N-79).
Covers all versions of the 102N lathes in great detail and includes the entire
and extensive accessory range. 122 pages.
S62H Schaublin 102N Plain Lathes: Abbreviated Technical Sales and Technical
Specification Catalogue 1979 (Catalogue No. 102N-79). 15 pages.
S62J Schaublin 102N-VM Screwcutting Lathe: Sales and Technical Specification
Catalogue 1979 (Catalogue No. P-102N-VM/79). 15 pages.
S62K Schaublin 102 Lathes. Full-range Sales Catalogue and Accessories 1993
(Catalogue 102N-93). 20 pages.
SCHAUBLIN - other lathes
S63 Schaublin 9A Cam-forming Lathe: Sales and Technical Specification
Catalogue 1949 (Catalogue No. 9A/49) 4 pages.
S63A SCHAUBLIN SV120 Toolmakers' Lathes. Full-range Sales Catalogue and
Accessories 1950 (Catalogue 120/50) 24 pages.
S63B Schaublin 123 High-precision "Camless" Automatic Lathe:
Technical Sales and Technical Specification Catalogue 1979 (Catalogue 123/79)
51 pages.
S63C Schaublin 125 Lathe: Detailed Technical Sales and Technical
Specification Catalogue with annotated diagrams. 1980 (Catalogue 125/80) 43
pages.
S63D Schaublin 125 Lathe: Detailed Accessories Catalogue. 1974 (Catalogue
125-Acc.74) 28 pages.
S63DD Schaublin 130 and 150 lathes. Sales and
Specification Catalogue. 9 pages.
S63E Schaublin 135 Lathe Technical Sales and Technical
Specification Catalogue 1965 (Catalogue 135/65) 8 pages.
S63F Schaublin 150 Lathe Technical Sales and Technical Specification
Catalogue 1976 (Catalogue 150/76). 35pages.
S63G Schaublin 160 Lathe Technical Sales and Technical Specification
Catalogue 1963 (Catalogue 160/63). 4 pages.
SCHAUBLIN CNC
S64 Schaublin 125-CNC Lathe: Sales and Technical Specification Sheet 1975
(Catalogue P.125-CNC/75) 2 pages.
S64A Schaublin 110-CNC Lathe. Sales Catalogue and Accessories 1987 (Catalogue.
110-cnc/87). 4 pages.
S64B Schaublin 36R-CNC Lathe: Technical Sales and Technical Specification
Catalogue: 12 pages.
S64C Schaublin 102-CNC, 110-CNC and 130-NC Lathe: Technical Sales and Technical Specification
Catalogue: 4 pages.
S64D Schaublin 125-CNC, 125-CCN, 125-CCN L-T, 125-CCN R-T, 180-CNC 180-CCN, 180-CNN R-T,180-CCN R-TM: Technical Sales and Technical Specification
Catalogues: 28 pages.
SCHAUBLIN - Milling Machines
S65 Schaublin SV12 Precision Milling Machine: Early (1930s) Technical Sales
and Technical Specification Catalogue. 23 pages.
S65A Schaublin SV-12 Precision Milling Machine: Technical Sales and Technical
Specification Catalogue 1952 (Catalogue 12/52) 20 pages.
S65B Schaublin 13 Precision Milling Machine Technical Sales and Technical
Specification Catalogue 1950 (Catalogue13/50) 16 pages.
S65C Schaublin 13 Precision Milling Machine Technical Sales and Technical
Specification Catalogue 1961 (Catalogue. 13/61) 28 pages.
S65D Schaublin 22 Precision Milling Machine: Detailed and well illustrated
Technical Sales and Technical Specification Catalogue 1976 (Catalogue 22/76).
27 pages.
S65E Schaublin 53 Universal Precision Milling Machine: Technical Sales and
Technical Specification Catalogue 1960 (Catalogue 53/60). 24 pages.
S65F Schaublin 53 Universal Precision Milling Machine: Technical Sales and
Technical Specification Catalogue 1964 (Catalogue.53/64) 24 pages.
S65G Schaublin 53N Universal Precision Milling Machine: Technical Sales and
Technical Specification Catalogue 1975 (Catalogue 53N/75). A superb,
well-illustrated production. 40 pages.
S66 Schaublin Model 20 Rotary Transfer Machine Technical Sales and Technical
Specification Catalogue 1962 (Catalogue 20/62). 12 pages.
S66A Schaublin Model 36R-CNC High Precision Milling Machine with CNC control.
Sales and Technical Specification Catalogue 1981 (Catalogue 36R-CNC/81) 11
pages.
S66B Schaublin S11 Tool and Cutter Grinder. Catalogue of Accessories. 22 pages.
S75 SCHEU (Berlin) Multi-cut Flat Turret lathe. Technical Sales and Technical
Specification Catalogue. 4 pages.
S78 SCHIESS KOPP Crankshaft Grinding Machine SN31.31-1000 CNC. Sales and
Technical Specification Catalogue. 2 pages .
S78A SCHIESS 1866 -1955 Anniversary Booklet. An illustrated Story of a German Enterprise. Schiess Aktiengesellschaft. (English text) 24 pages.
S78B SCHIESS - Milling, Boring and Gear Cutting Large Components. A well-illustrated and interesting Catalogue showing the use of Schiess boring,
milling and gear-cutting machines working on huge industrial components. 24 pages. English and German text.
S80 SCHUCHARDT and SCHUTTE of Berlin. Tooling Catalogue 1927 - German text.
135 pages.
S90 SCHUMACHER and BOYE (USA) Engine Lathes: Sales and Technical
Specification Catalogue (Formerly Boye and Emmes Machine Tool Co.) 16 pages.
S92 SCHULER (L. Schuler of Goeppingen, Germany) Catalogue for:
"Tinsmiths', Coppersmiths', Zinc Workers and Like mechanics": Items
shown include: Lever shears, Guillotines, and machines for: beading, flanging,
moulding, lever punching, wire cutting, seaming, screw pressing. Spinning
lathes, draw benches, planishing and polishing hammers, Curling machines, etc.
160 pages. Dated August 14th 1914 (war between Britain and Germany was declared
on August 4th).
S92A SCHULER (L. Schuler of Goeppingen, Germany) Crank Power Presses. Sales
and Technical Specification Catalogue dated 1922. 212 pages.
S92A SCHULER (L. Schuler of Goeppingen, Germany) "New Models for 1937".
Folding machines, Knuckle-joint embossing press, gand press, hydraulic press,
sheet-metal edge former, double-sided eccentric press, etc. Sales and
Technical Specification Catalogue. 8 pages.
S94 SCHUTTE Tool and Cutter Grinders. Special Equipment and Accessories
Catalogue. Profusely illustrated with detailed descriptions. 36 pages.
S94M SICMATIC Copying Lathes Models Autosicmatic TRIAD, Autosicmatic DUMAX,
Autosicmatic DUMID, Autosicmatic DUMOR, Sicmatic TRIAD, Sicmatic DUMAX, Sicmatic DUMIN and
Sicmatic DUMOR. Sales and Technical Specification Catalogue. 12 pages.
S95 SCINTILLA (Scinta/Lesto) Universal Precision lathe.
Sales and Technical Specification Catalogue. 21 pages.
S98 SCOPE Multi-purpose lathe. Sales and Technical Specification Catalogue. 4
pages.
S100 SCRIVENER 618 and 824 Surface Grinders. 2 Sales and Technical
Specification Catalogues. 20 pages.
S100B SCRIVENER No. 1 Centreless Grinders including Model D and
Controlled-Cycle types. 4 Sales and Technical Specification Catalogues
including one dedicated to explaining the process of controlled-cycle work. 38
pages.
S100C SCRIVENER No. 2G Centreless Grinders including Controlled-Cycle types.
Sales and Technical Specification Catalogue. 16 pages.
S100D SCRIVENER No. 3 Centreless Grinders. Sales and Technical Specification
Catalogue. 12 pages.
S100E SCRIVENER Centreless Grinders 1CA, 1CB, 2CA and 2CB. Sales and
Technical Specification Catalogue. 8 pages.
S100F SCRIVENER Horizontal Duplex Surface Grinders. Sales and Technical
Specification Catalogue. 4 pages.
S100G SCRIVENER Duplex Face Grinding Machines Models 24 and 30. Sales and
Technical Specification Catalogue. 12 pages.
S100H SCRIVENER Duplex Peripheral Machines Model 36DPG. Sales and Technical
Specification Catalogue. 2 pages.
S100Z SCRIVENER Cam-profile turning Lathe. Sales and Technical Specification
Catalogue. 12 pages.
SDM = see under "Davis" for Stuart Davis Machine Tools
S154 SEBASTIAN Lathes Catalogue No. 30 (with attached 1927 letter). Beautifully
illustrated Catalogue with a mixture of geared-head and belt-drive lathes. 38
pages.
S154A SEBASTIAN GOLD SEAL Lathes: beautiful full-range Catalogue No. 33 from
the 1930s with a mixture of geared-head and belt-drive lathes. 40 pages.
S154B Sebastian "Streamline" Type L Cone Head lathes 10" -
12" - 13". Sales and Technical Specification Catalogue 1940. 4
pages.
S154C Sebastian Bench Lathes 10"and 12" with Geared Headstock and
cone Head Drives. Sales and Technical Specification Catalogue circa 1940. 4
pages.
S154D Sebastian "Streamline" Type M Geared-head Lathes 10" -
12" - 15" - 16" - 20". Sales and Technical Specification
Catalogue circa 1940. 6 pages.
S154E Sebastian Type B Cone Head lathes 10" - 12" - 13" -15"
- 16" - 20". Sales and Technical Specification Catalogue circa
1940. 4 pages.
S154F Sebastian 13-inch Geared Head Precision Lathe Sales and Technical
Specification Catalogue early 1950s. 4 pages.
S154G Sebastian full-range Lathe Catalogue No. 22 from February
1918. 16 pages.
S154h All the above Sebastian sales literature:
S156 SENECA FALLS (USA) "Star" Lathes Sales and Technical
Specification Catalogue No.20B. A rare early Catalogue from circa 1905. 38
pages.
S156A SENECA FALLS (USA) "Star" Lathes Sales and Technical
Specification Catalogue No.24B complete with price lists dated 1911 and 1913.
This interesting Catalogue is unusual in showing the short-lived geared-head
lathes, wood and speed lathes missing from later editions. 56 pages.
S156B SENECA FALLS "Star" Lathes: Catalogue No.27 with Parts Lists
and Threading Charts. About 1920 55 pages.
S156C SENECA FALLS "Star" Lathes: Catalogue No.28 (large format)
About 1925 24 pages.
S156D SENECA FALLS "Star" Lathes: Catalogue No.32 (large format) with
factory letter dated 1936 18 pages.
S156E SENECA FALLS Woodworking Machinery for Foot, Hand and Light Power.
Catalog No. 21-A with Price List for 1911. Shows: "Union" Combination
Saws with Boring, Scroll Saw, Moulding and Huther's Grooving Attachments,
"Victor" Scroll Saws with lathe attachment, "Empire" Scroll
Saws, Band Saws, "Rex" Moulders, "Gem" Moulding Cutters,
"Diamond" Mortiser and Seneca Falls Wood-turning Lathes. 28 pages.
S156F All the above SENECA FALLS "Star" Literature as one package.
includes items reference: S156, S156A, S156B, S156C, S156D and S156E
S160 SENIOR (Tom Senior) 1934 a very interesting early General Catalogue
showing a range of Lathes in kit and complete forms: Shapers, Planers, Drills,
Milling Slides, Dividing Attachments, Castings, Chucks, Horizontal Miller and
Tools for Engineers: 72 pages.
S160A SENIOR a very interesting general Catalogue: Shapers, Planers, Drills,
Milling Slides, Dividing Attachments, Castings, Chucks, Horizontal Miller and
Tools for Engineers: 1940 64 pages.
S160B SENIOR Milling Machines: Very rare Senior M1 Catalogue early 1950s. 8
PAGES.
S160C SENIOR Milling Machines: several full-range Catalogue 1950s, 1960s, 1970s
and 1980s showing the development of the various models: 1950s and 1960s
(12 pages); 1970s (12 pages); 1980s (12 pages) + the early Senior Catalogue
S160F SENIOR Type E Vertical Miller: Sales and Technical Specification sheet.
2 pages.£12
S160F SENIOR 7.5-inch Dividing Head Sales and Technical Specification Catalogue with complete details. 2 pages.£12
S167 SHARP (UK) Mk. 2 Universal Milling Machines: Sales and Technical
Specification Catalogue. 6 pages.
S170 SHELDON (USA) Very detailed, superbly produced Whole-range Catalogue
showing the lathes as they were produced from the late 1930s until the late
1940s 48 pages.
S170A Sheldon 10-inch Lathe: Sales and Technical Specification sheet 1937 4
pages.
S170B Sheldon 11 and 12-inch Lathe: Catalogue and price lists 1939/41. 42
pages.
S170C SHELDON (USA) Lathes, Millers and Shaper Catalogue 1945/47 complete
with price and specification lists. 20 pages.
S170C SHELDON (USA) Detailed Whole-range Catalogue from 1949 showing the
Sheldon and Sheldon-Vernon range of Shapers, Horizontal Millers and Lathes. 16
pages.
S170D SHELDON (USA) Lathes. Whole Range Catalogue 1955 24 pages.
S170E Sheldon Late-Model R-Series 13, 15 and 17-inch Lathes Models R-13, VR-13, R-15, VR-15, R-17 and VR-17 (with enclosed, dial-change screwcutting gearbox).
Detailed and well illustrated Sales, Technical Specification and Accessories Catalogue.
S170F Sheldon 15-inch Lathe Sales and Technical Specification Catalogue 1958
4 pages.
S170G Sheldon Variable-speed Lathes Sales and Technical Specification
Catalogue 1958 4 pages.
S170H Sheldon 10, 11 and 13-inch Lathe Catalogue 1962 8 pages.
S170J Sheldon Lathes and Accessories and Price Lists. Whole Range Catalogue
1967 32 pages.
S170K Sheldon 10 and 13-inch Precision Lathes: Catalogue 1967 42 pages.
S170L Sheldon Horizontal Miller: Sales and Technical Specification Sheets 3
pages.
S170M Sheldon 12-inch Shaper: Sales and Technical Specification Sheets 2
pages.
S170N SHELDON (Vernon/Sheldon) Vertical Miller and Jig Borer. Sales and
Technical Specification Catalogue. Very rare. 4 pages.
S175 SHERATON (Australia) 4.5-inch Bench Lathes (South Bend clone) and
6.5-inch "Defiance" lathe. Sales and Technical Specification Catalogue.
5 pages.
S178 SHERWOOD Woodworking Machines. Catalogues for the Lathe, Bowl-turning head
unit and bench saw. Includes letters, prices and descriptions. 12 pages.
S182 SHIGIYA Grinders G-20 Series, G-30(40) Series, G-45(55)B Series, G-65(85)(100)
Series, GAS-20 Series, GAS-30(40) Series, ND2 Series, GN Series, GNW Series,
GCP Series, SG Series, SASL125 Series, C-8 Series. Brief Technical
Specifications and pictures. 8 pages.
S186 SHIPMAN (A.H.Shipman U.S.A.) Two Catalogues of Treadle Lathes, Scroll
and Fret Saws, Treadle Lathes combined with Scroll Saws, Saw Blades and
associated equipment. 64 pages.
S187 Shizuoka Milling Machines: Catalogues for all versions of the the Turret & Conventional
Models: VHR-G, VHR-A, VH-A, VHRU-G, SV-C, SC-CH, SP-C, SP-CH, etc. 12 pages.
S188A SHW UF-1 Universal Precision Milling Machine. Sales Sheet. 2 pages.
S188 SHW UF-2 Universal Precision Milling Machine. Sales, Accessories and
Technical Specification Catalogue. Superbly illustrated. 44 pages.
S188B SHW UF-3 Universal Precision Milling Machine. Sales Sheet. 2 pages.
S188A SHW UF-1K Universal Precision Milling Machine. Sales Sheet. 2 pages.
S190Z SIDNEY Lathes Catalog Collection: 16-inch "Model 16" Toolroom Model; "Herringbone" Model; 16-inch Model 32, "Herringbone" Model 1948,
25-inch "Herringbone" Model 1947; 32-inch Heavy Duty Lathe 1947 (Speed dial protrudes above top edge of headstock);
Models 16, 20, 25 and 32 from 1948 and the "Tritrol" and "Monotrol" models. 56 pages.
MS218 SIMAT Perris and Norfolk, Hector, Flexispeed, Simat 101, Meteor and
Derivatives. A complete 150-page Data Pack containing everything ever published
for these miniature lathes: Sales and Specification Sheets, Illustrated Parts
Manuals, sheets of Assembly Instructions for the Perris version and the Flexispeed,
Simat and Meteor. A separate 8-page Manual for the Meteor 2 is also included.
Full-size "blue print" (in sections) and an additional 8-page Mk. 1 Sales and
Specification and Accessories Catalogue together with specification and price lists from the 1970s.
MS199 SIMMONS 48" and 54" Heavy-duty lathe. Sales and Technical
Specification Catalogue 8 pages.
S200 SIMONET DZ-450 Precision Lathes: Also shows the DRA-102, DRD-102, DR-102,
DC-102 Sales and Technical Specification Catalogue 10 pages.
S200A SIMONET Precision Lathes: Range Catalogue. 3 pages.£8
S200B SIMONET DC 102 Precision Plain-turning Lathe. Sales and Technical
Specification Catalogue. 4 Pages.
S210 SIMPLEX (by Mondial, the Netherlands) 10-inch lathe. Sales and Technical
Specification Catalogue. 8 pages.
S212 SIMPLEX (of Hamilton USA) 10" lathes circ 1919. 1-page sales sheet
picture as put out by Selson in the UK.
S216 SIMPLON MILLING MACHINES Types: 2VA, 2URT, UF, UM and UN. Sales, Accessories & Technical
Specification Catalogue. 21 pages.
S222 SINN Millers MS11D, MS111D, MS1Vs (MS2D, MS3D, MS4D) Universal Precision
Milling Machines. Sales and Technical Specification Catalogue. 4 pages. .
S224 SIP (SOCIETE GENEVOISE) Full-range, all-models and accessories Catalogue
covering the period 1950s to 1960s. This consists of the largest Catalogue from
the period, plus every additional different page from other SIP
"Full-range" publications of the same era. Jig Borers: 1H, 2P, 3K,
3K-CN, 4G, 5E-CN, 6A, 6A-DIR, 6A-CN, 7A, 7P, 7A-DIR, 7A-CN, 8P. Measuring
Comparators F-7B, Universal Measuring Support U-10, Micro-indicators MI-18 and
MI-30, High Precision Micro-Indicator Type MI-6B, Micrometer Type W-20, Shop
gauge Measuring machine Type MUL-300, Universal Measuring machine Type MU-214B,
Trioptic Universal Measuring Machine, 3-co-ordinate Measuring Machine
Superoptic-6AM, Superoptic-7AM, Universal Measuring Machine Type MUL-1000,
Universal Measuring Machine Type MUL-3000, Universal Measuring Machine Type MUL-4000,
Profile Projector AP-6A and Universal Profile Projector Type AP-10. Spark
erosion machine 1-EE. Circular dividing tables conventional and optical, tool
cabinets, tooling and cutters, boring tools, special tooling, tool holders,
tapping attachments, etc. 98 pages.
S224A SIP/Hauser Manufacturing Programme Catalogue. Shows the Types SIP640,
SIP740, MP-42DR, MP-52DR, MP-44, MP-54, SIP 302M, SIP305M, SIP1002M, SIP3002M,
SIP414M, SIP560M, "Omnisip", OPUS6, OPUs7, and "Logisip".
20 pages.
S224B
SIP Jig Borer "Performance Data" Catalogue
with 31 full-page illustrations of the jig borers in use together with notes of
the time and cost savings involved. Issued for the American Market. 34 pages in total.
S225 SIP (SOCIETE GENEVOISE). Ver early Sales and Technical
Specification Catalogue (probably 1928) showing the No.3 Model. 12 pages.
S225A SIP (SOCIETE GENEVOISE). Early Sales and Technical Specification
Catalogue (probably 1929) showing the Models MP-4B, MP-5B and MP-6. 28 pages.
S225A/2 SIP (SOCIETE GENEVOISE). Early Sales and Technical Specification
Catalogue dated 1929 showing the Models MP-4B and MP-5B. 4 pages.
S225B SIP (SOCIETE GENEVOISE). Early Sales and Technical Specification and
Accessories Catalogue dated 1930 that details the principles of jig boring,
explains the SIP measuring system, and shows examples of what the machines were
capable of. Includes the MP-4B, MP-5B and MP-6 models. 28 pages.
S225B-40 SIP (SOCIETE GENEVOISE) Full-range Catalogue with pages dated 1944,
1945, 1946 and 1947 showing Jig borers Types MP-1H, 2C, 2H, 3K, 4G,
Hydroptic-B, Hydroptic-7, Hydroptic-8, rotary tables, tilting rotary tables,
twist drills, end mills, boring tool holders Type L, toolholders Type P, Thread
Grinding Machine Type RU-2, Measuring Comparator Type F-7, Drum Dividing
Machine Type MDT-65A, Circular Dividing Machine Type MDC-64B, Linear Dividing
Machine Type DLA-1000, Universal Measuring Support Type U-10, Micro-Indicators
MI-18 and MI-30, High Precision Micro-Indicator Type MI-6B, Micrometer Type
W-20, Shop Gauge Measuring Machine Type MUL-250, Universal Measuring Apparatus
Type MU-214B, Universal Measuring Machine Type MUL-1000, Profile Projector Type
AP-6, Universal profile Projector Type AP-10, Profile Projector Type AP-11. 58
pages.
S225C SIP All-Models (small-format) Catalogue dated 1964 showing the JIG
BORERS: 1H, 2P, 3K, 5E, 6A, 6A-CN4, 6A-DIR, 7A, 7ADIR, 7A-CN4, 8P. Profile
projector AP-6A, Universal Measuring Support U-10, Optical Measuring Machines:
MUL-300, MU-214B, TRIOPTIC, MUL-100, MUL-3000, MUL-4000. 3 Co-ordinate
Measuring Machines: Hydroptic-6AM, 7AM, 6AM-CN5, 7AM-CN5, 6AM-DIR and 7AM-DIR.
S225D SIP (SOCIETE GENEVOISE) Optical Jig Borer No.1H. Sales and Technical
Specification and Accessories Catalogue 12 pages.
S225E SIP (SOCIETE GENEVOISE) Optical Jig Borer No.2P. Sales and Technical
Specification and Accessories Catalogue 8 pages.
S225E3C SIP (SOCIETE GENEVOISE) Jig Borer No.3C Sales and Technical
Specification and Accessories Catalogue 12 pages.
S225F
SIP (SOCIETE GENEVOISE) No. 3K and 3KA Precision Jig
Borers. Sales and Technical Specification and Accessories Catalogue. 16
pages.
S225G SIP (SOCIETE GENEVOISE) No. 3K-CN and 5E-CN Numerical Controlled Jig
Borers. Sales and Technical Specification and Accessories Catalogue. 12
pages.
S2254G SIP (SOCIETE GENEVOISE) No.4G Jig Borer. Sales, Technical Specification and Accessories Catalogue (dated 1947). 26 pages.
S225H SIP (SOCIETE GENEVOISE) Jig Borer No.5E. Sales and Technical
Specification and Accessories Catalogue 12 pages.
S225J SIP (SOCIETE GENEVOISE) Jig Borer No.5E/5EA. Sales and Technical
Specification and Accessories Catalogue 20 pages.
S225L SIP (SOCIETE GENEVOISE) Hydroptic 6A and 7A Jig Borer. Sales and
Technical Specification and Accessories Catalogue 34 pages.
S225M SIP (SOCIETE GENEVOISE) Hydroptic 6ADIR and 7ADIR Jig Borer. Sales
and Technical Specification and Accessories Catalogue 16 pages.
S225M2 SIP (SOCIETE GENEVOISE) Hydroptic 8P Vertical and Horizontal Jig Boring
Machine. Sales and Technical Specification and Accessories Catalogue 24
pages.
S225N SIP (SOCIETE GENEVOISE) SIP4000 High-precision machining centre. Sales
and Technical Specification and Accessories Catalogue 20 pages.
S225MP-DR SIP-HAUSER MP-42DR and MP-52DR Jig Boring Machines. Sales and
Technical Specification and Accessories Catalogue 8 pages.
S226 SIP (SOCIETE GENEVOISE) No. 1-EE Precision Spark Erosion Machine (Electro
Discharge). Sales and Technical Specification and Accessories Catalogue 16
pages.
S226A SIP (SOCIETE GENEVOISE) 3EE and 3EEA high Precision Spark Erosion Machine
(Electro Discharge). Sales and Technical Specification and Accessories
Catalogue 8 pages.
S226B SIP (SOCIETE GENEVOISE) MIL-300 High-precision Measuring Machine. Sales
and Technical Specification and Accessories Catalogue. 20 pages.
S226C SIP (SOCIETE GENEVOISE) Sogenique Clamping Sets. Sales and Technical
Specification and Accessories Catalogue. 4 pages.
S226D SIP (SOCIETE GENEVOISE) AP-6A Profile Projector. Sales and Technical
Specification and Accessories Catalogue with price list. 14 pages.
S226E SIP (SOCIETE GENEVOISE) Circular Dividing tables (Dividing Heads) Sales
and Accessories Catalogue. 8 pages.
S226Z SIP - small booklet "Accuracy Guaranteed" giving the limits for
a range of models. 12 pages.
S226Y SIP Thread Grinding Machine Type RU-2. Detailed Sales, Specification and
Accessories Catalogue. 28 pages.
***********************************************************************************************
S228 SIT (Society Innovations Techniques) D4 Tangential Surface Grinder. Sales
and Technical Specification Catalogue. 4 pages .
S228A SIT (Society Innovations Techniques) R4 Surface Grinder. Sales and
Technical Specification Catalogue. 2 pages .
S228B SIT (Society Innovations Techniques) R650 Tangential Surface Grinder.
Sales and Technical Specification Catalogue. 4 pages .
S228C SIT (Society Innovations Techniques) RP500, RP800 and RP1000 Tangential
Surface Grinders. Sales and Technical Specification Catalogue. 4 pages .
S228D SIT (Society Innovations Techniques) RPM650 and RPM1000 Creep Feed
Grinders. Sales and Technical Specification Catalogue. 2 pages .
S228E SIT (Society Innovations Techniques) V5sc Cylindrical Grinder. Sales
and Technical Specification Catalogue. 2 pages .
S228F SIT (Society Innovations Techniques) RCE450, RCE700 and RCE1000
Cylindrical Grinders. Sales and Technical Specification Catalogue. 12 pages
.
S228G SIT (Society Innovations Techniques) U700 and U1000 Cylindrical
Grinders. Sales and Technical Specification Catalogue. 4 pages .
S228H SIT (Society Innovations Techniques) C120, C200 and C300 Internal
Grinders. Sales and Technical Specification Catalogue. 8 pages .
S230 SIXIS S-101 Universal Milling Machine. Sales and Technical Specification
Catalogue. 16 pages.
S230A SIXIS S-102 Universal Milling Machine. Sales and Technical Specification
Catalogue. 16 pages.
S230B SIXIS S-103 Universal Milling Machine. Sales and Technical
Specification Catalogue. 16 pages.
S230C SIXIS S-104 Universal Milling Machine. Sales and Technical
Specification Catalogue. 10 pages.
S230D SIXIS S-104 CNC Universal Milling Machine. Sales and Technical
Specification Sheet. 2 pages.
S230E SIXIS MP-400 S-104 Universal Milling Machine. Sales and Technical
Specification Catalogue (French text). 10 pages.
S230F SIXIS Numerically Controlled Precision Machine Tools. Sales and
Technical Specification Catalogue. 8 pages.
S230G SIXIS Super-precision Milling Machines. Range Catalogue showing the
S-101, S-101H, S-102, S-102H, S-103, S-103H, S-104 and MP-400 12 pages.£25
S230H SIXIS super-precision Milling Machine. Sales and Technical
Specification Catalogue 5 pages.£12
S235 SLOAN and CHACE: Two Catalogues of: Precision Bench Lathe No.
"Five-and-and-half" and "Five" models together with their
Accessories including the screwcutting attachment, compound slide rest, lever-operated compound slide rest, drill pads,
V-centres, grinding attachment, tool-post grinder, steadies, boring rest, steady rest, revolving tailstock, faceplates, expanding chuck,spring collets and step chucks; Automatic Staff and Pivot Lathe, Precision Bench Milling
Machines No. 2 and No.3, Single-spindle Drill Press, three-spindle drill press, Precision Gear Cutting Machines, No. 1 Automatic
Gear Cutter, No.3 Automatic Gear Cutter, Automatic Pinion Cutter, vertical lever tapping machine, vertical table-lift tapping machine. 42 pages.£42
S238 Smal Fraiseues Universal (Universal Milling Machine) Type S.F.U.2 Sales, Technical Specification and Accessories Catalogue. 4 pages.
S238A Smal Lathe Type Am235. Sales, Technical Specification and Accessories Catalogue. 4 pages.
S240A SMART and BROWN Models L and A Precision Plain Turning Lathe. Sales
and Technical Specification Catalogue - 1945. 1st edition. Superb pictures.
35 pages.
S240B Smart and Brown Model "L" Lathe. A collection of Early and
Late Literature including a very high quality Catalogue showing the lathe and
all is accessories. 40 pages.
S240D SMART and BROWN Model L Capstan Lathes. 3 catalogues showing the
standard, Automated Model L (with Martonair Variable-sequence Control) and the
Automatic Single-spindle 2nd Operation Models. 12 pages.
S240E SMART and BROWN 1024 Toolroom Lathe: Detailed Sales, Specification
and Accessories Catalogue. 8 pages.
S240F SMART and BROWN 1024 VSL (variable-speed drive) Toolroom Lathe:
Detailed Sales, Specification and Accessories Catalogue. 14 pages.
S240G Smart and Brown Model A Toolroom Lathe: Sales, Specification and
Accessories Catalogue. 14 pages.
S240H Smart and Brown Model A Toolroom Lathe Mk2: Sales, Specification and
Accessories Catalogue. 4 pages.
S240J Smart and Brown Model "M" Precision Lathe. 3 different Sales,
Specification and Accessories Catalogues. 11 pages.
S240L Smart and Brown Sabmatic-25 Automatic capstan lathe. Usefully detailed
Sales and Technical Specification Catalogue. 14 pages.
S242 SMID RE-24 Capstan Lathe. Sales and Technical Specification Catalogue
with FRENCH TEXT. 4 pages.
S244 Smith & Mills 32-inch Shaper. Sales & Technical Specification Catalog. 4 pages.
S246
Snow OS Surface Grinders 2 editions of the well-illustrated and detailed maker's Sales & Technical Specification Catalogues
one of which has an excellent 3D drawing of the spindle assembly that shows it complete construction. 22 pages.
S246Z
Snow OS-OSHD Surface Grinders. Sales & Technical Specification Catalogue. English, French and German Text. 20 pages.
S246A Snow Model G Heavy-duty Face Grinders. Two Sales & Technical Specification Catalogue - early and late. 14 Pages.
S246B Snow Slab Grinder (operator sits in a cabin open to the right-hand side). Two Sales & Technical Specification Catalogues early and late. 9 pages.
S246C Snow Type T Table Surface Grinder. Floor-column model with a circular annular stone set in a recess on the top face of the machine. Sales & Technical Specification Catalogue. 4 pages.
S246D Snow Type RT400, RT500 and RT600 Horizontal Spindle Rotary Table Surface Grinders. Two Sales & Technical Specification Catalogues. English, French and German Text. 12 pages.
S246E Snow FG200 Form Grinder. Sales & Technical Specification Catalogue. 6 Pages.
S246F Snow Double Disc Grinders Models DDG30 and DDG36. Sales and Technical Specification Catalogue. 8 pages
S246G Snow Flash Grinders: Rotary Transfer Type 36 and Type AHDG Automatic Heavy Duty. Sales and Technical Specification Catalogues. 10 pages
S246H Snow Grinders Older Types Catalogue Set: "G", "P", "W20", "C", "DA14", "Segmental", "V", "V12", "V18", "N", "C Cutting Off Machine", "K", and "N". 52 pages.
Societe Alsacienne De Constructions Mechaniques - see under
GRAFFENSTADEN
SOCIETE GENEVOISE - See under "SIP" above
SOCIETE INNOVATIONS TECHNIQUES = see under "SIT" above
S247 SOMUA (H.Ernault-Somua) Full-range Catalogue December 1975 showing factory
sites, lathes in centre, copy, NC, turret, roll turning and very large types.
Threading machines, milling machines, NC milling machines, Boring and Milling
Machines, gantry milling machines, surface grinders and spark-erosion machines.
40 well-illustrated pages.
S247A SOMUA (H.Ernault-Somua) Cholet Cycle Lathe. Sales, Technical
Specification and Accessories Catalogue. 2 pages.
S247B SOMUA (H.Ernault-Somua) Cholet 350, 435 and 550 Centre Lathes. Detailed &
well-illustrated Sales, Technical Specification and Accessories Catalogue. 38 pages.
S247C SOMUA (H.Ernault-Somua) Cholet Lathes Models 350, 435, 550 and 660 Detailed &
well-illustrated Sales, Technical Specification and Accessories Catalogue.
28 pages.
S247D SOMUA (H.Ernault-Somua) AC280 lathe. sales, Technical Specification and
Accessories Catalogue. 4 pages.
S247E SOMUA (H.Ernault-Somua) MS1 Copying lathe. Sales, Technical Specification
and Accessories Catalogue. 4 pages.
S247F SOMUA (H.Ernault-Somua) MS1 Copying lathe. Sales, Technical Specification
and Accessories Catalogue. 4 pages.
S247G SOMUA (H.Ernault-Somua) Lathe Type P4 Technical Specification Sheet. 2 pages.
S247H SOMUA (H.Ernault-Somua) Lathe Type P.24 Technical Specification Sheet. 2 pages.
S247J SOMUA (H.Ernault-Somua) Lathe Type P.22 Technical Specification Sheet. 2 pages.
S247K SOMUA (H.Ernault-Somua) Lathe Type TFR 500 Copying. Technical Specification Sheet. 2 pages.
S247L SOMUA (H.Ernault-Somua) Copying Lathe Type MS1 Technical Specification Catalogue. 4 pages.
S247M SOMUA (H.Ernault-Somua) Capstan (Revolver) Lathes in Selective, Semi and Full Automatic Types.
Full-range Catalogue showing the RA5, RS2, RS3, RS5, N2B, N3 and N5Bin English and French. 28 pages.
S247N SOMUA (H.Ernault-Somua) Lathe Types HN350, HN400, HN500, HNC400, HNC450 and HNC600 Technical Specification Catalogue. FRENCH TEXT ONLY. 24 pages.
S247P SOMUA (H.Ernault-Somua) Threading machine "Helicomatic" Technical Specification Catalogue with a detailed description ofthe machine's construction and operation. 14 pages.
S247X SOMUA (H.Ernault-Somua) General Catalogue showing own-manufacture and factored machines including: Z1B, Z3, Z44 millers;
Cornac BS65, BA65, M.C.B., M.C.D.; PE250 and PG300 Cornac Plano-type Boring machines;
ME65, MG50 and MG80 Cornac Floor-type Boring machines; C.O. Open-sided Planing machine; C1A, C1B, C2A, C2B, C3A and C3B Line Planing machines;
P.720 Toolroom lathe, P.1000 Heavy-duty lathe, Heavy-duty engine lathes, boring machines, vertical boring mills, capstan lathes;
Precis Precision plain, second-operation and capstan lathes, Precis drilling and tapping machines; cold saws, grinders, Somua Hydraulic Presses, ;
grinding machines, Impco shaft straightening machines, Zocca surface grinders and Constan carbide tool lapping machines, etc. 16 pages.
S247Y SOMUA (H.Ernault-Somua) Bed-Type Milling machines Z1.Z2 Technical Specification and Accessories Catalogue.
14 pages.
S247Z SOMUA (H.Ernault-Somua) Milling machines Z1C (Semi-jig borer), Z3C,ZHV1, ZHV3, ZHV1 AND
SEMI-JIG-BORER Z1C. Two Sales, Technical Specification and Accessories Catalogues.
38 pages.
S250 SONOBOND "Sonoweld" Ultrasonic Spot Welder Model MH-2014.
Instruction Manual with 6 blue-print size Electrical Diagrams.
S275 SORBY (Robert Sorby) General Catalog circa 2002 showing the Wood Lathes,
their accessories and all other Sorby products. 32 pages
SOUTH BEND: like all our publications, all the following are high-resolution
scans, cleaned and post-scanned prepared, printed on top-quality120g paper and
bound to give a near-perfect reproduction of the originals
S300 SOUTH BEND (USA) full-range Catalogue 1918 (Catalogue No. 55) - If you
have an early South Bend lathe of any size, this, or the one below, is the
edition you need. (Includes a 1918 price list). 48 pages.
S300A SOUTH BEND (USA) full-range Catalogue 1920 and price list. (Catalogue No.
60) - If you have an early South Bend lathe of any size, this, or the one
above, is the edition you need. (Includes a 1918 price list). 64 pages.
S300B South Bend: very early (1914) edition of "How to Run a Lathe".
64 pages.
S300C South Bend: full-range Catalogue (Red-book Series) 1920. 64 pages.
S300D South Bend: "Junior" Catalogue 1923 (not the Junior lathe, but
the smaller of the two Catalogues issued). 36 pages.
S301A South Bend: Catalogue for the "Junior" Lathe March, 1932. 24
pages.
S300E South Bend: full-size, full-range Models and Accessories Catalogue August
dated 1924 (Catalogue No. 82). 52 pages.
S300F South Bend: full-size, full-range Models and Accessories Catalogue
August, dated 1927 - 1928 (Catalogue No. 87). 64 pages.
S300G South Bend: full-size, full-range Models and Accessories Catalogue May
1928 (Catalogue No. 89). 76 pages.
S300H South Bend: full-size, full-range Models and Accessories Catalogue June
1929 (Catalogue No. 90-A). 100 pages.
S300J South Bend: full-size, full-range Models and Accessories Catalogue
"Easy Payment Plan Catalogue" June 1929 (Catalogue No. 90-P). 100
pages.
S300K South Bend "9-inch Junior" Catalogue No. 22-C for March 1931.
24 pages.
S300L South Bend "9-inch Junior" Catalogue for March 1932. 12 pages.
S301 South Bend: full-size, full-range Models and Accessories Catalogue dated
1931-32 132 pages.
S301B South Bend: full-size, full-range Models and Accessories Catalogue
January, 1933 76 pages.
S301C South Bend: full-size, full-range Models and Accessories Catalogue
February, 1934. 76 pages.
S301E South Bend: full-size, full-range Models and Accessories Catalogue
October, 1935. 76 pages.
S301F South Bend: full-size, full-range Models and Accessories Catalogue 1936.
75 pages.
S301G South Bend: full-size, full-range Models and Accessories Catalogue 1952. 91 pages.
S301H South Bend: South Bend: 1955 50th Anniversary full-size, full-range Models and Accessories Catalogue (Gold cover edition) 84 pages.
S301J South Bend: Full-size, Full-range Catalogue January, 1956. 82 pages.
S301K South Bend: full-size, full-range Models and Accessories Catalogue, 1958.
82 pages.
S301L South Bend: Abbreviated Full-size, Full-range Catalogue 1946. 8 pages.
S301M South Bend: Full-size, Full-range, late-model Catalogue 1966 showing the grared-head Type 17-inch Turn-nado, 16-inch Toolroom, 16-24-inch Large Swing, 14.5-inch Toolroom, 13-inch Toolroom, 10-inch cabinet types, 10-K bench-mount Precision,9-inch Precision, 16, 13 and 10-inch Turret, Lathe Accessories, Vertical Milling Machine and Accessories, 7-inch Shaper and Accessories, 14-inch Drill Press and Accessories and the South Bemnd Hydraulic Press .
S309/405B South Bend: The "original" 9-inch Workshop lathe was the
Model "5". The first known Catalogues to show this lathe were all
dated October 1934 and listed as Bulletin B,C,D and E. The clearest
reproduction was "D". 32 pages. (the others are available as
well)
S309A South Bend: "9-inch Workshop" (Precision) Lathe. "First
Edition" Catalogue 1935 32 pages.
S309AA South Bend: "9-inch Workshop" Lathe Catalogue No. 15-T dated
2-10-36 32 pages.
S309B South Bend: "9-inch Workshop" Lathe Catalogue No. 4 (yellow
cover), dated 1-3-38. 24 pages.
S309C South Bend: "9-inch Workshop" Lathe Catalogue No. 46E (orange
cover), dated 1-3-38. 24 pages.
S309E South Bend: "9-inch Workshop Lathe" Catalogue No. 46-B
(home-market edition) dated 1-10-39 - the best edition for owners of South Bend
9-inch lathes. A beautiful publication that shows the entire range of
accessories, and the final development of the complete model range as it was
pre WW2. 32 pages.
S309F South Bend: "9-inch Workshop" Lathe Catalogue No. 9-F
dated1948. Shows the traditional Models A, B and C together with the new range of
underdrive models on sheet-metal cabinet stands. 38 pages.
S309G South Bend: "9-inch Precision Lathe" Sales and Technical
Specification Catalogue 1951. 6 pages.
S310C South Bend: Attachments and Accessories Catalogue January, 1949. 29
pages.
S310D South Bend: 10K and Light Ten Lathes. Sales and Technical Specification
Catalogue. 13 pages.
S310DH South Bend Heavy 10 lathe. Extracts from several catalogues showing all
known data pages for this popular model. 26 pages.
S310E South Bend: "10-inch Precision Lathe" Sales and Technical
Specification Catalogue 1950. 4 pages.
S310F South Bend: "10-inch Precision Lathe" Sales and Technical
Specification Catalogue 1951 6 pages.
S310G South Bend: full-size, full-range Models and Accessories Catalogue 1952
91 pages.
S310H South Bend: 1955 50th Anniversary full-size, full-range Models and
Accessories Catalogue (gold cover). 84 pages.
S310J South Bend: full-size, full-range Models and Accessories Catalogue
January, 1956. 82 pages.
S310K South Bend: full-size, full-range Models and Accessories Catalogue 1958.
82 pages.
S310L South Bend: full-size, full-range Models and Accessories Catalogue
January, 1963. 100 pages.
S310M South Bend: full-size, full-range Models and Accessories Catalogue
January, 1967. 52 pages.
S310R South Bend: 10-inch lathe. 1972 Catalogue. 4 pages.
S310S South Bend: 10-inch "10-K" lathe. 1973 Catalogue. 4 pages.
S310N South Bend: 13-inch lathe. 1971 Catalogue. 4 pages.
S310P South Bend: 14-inch lathe. 1971 Catalogue. 4 pages.
S310T South Bend-Nordic: 25-inch geared-head lathe Catalogue 1981. 10 pages.
S310U South Bend: 20-inch "Turnnado" geared-head lathe Catalogue
1982. 8 pages.
S310V South Bend: 10-inch lathe. Very late (1987) Catalogue. 4 pages.
S310W South Bend: 1308 Gear-head Lathe Sales and Technical Specification
Sheet. 2 pages.
S320X South Bend Shaper: Sales and Technical Specification Catalogue 4 pages.
S320Y South Bend Vertical (ram) Miller: Sales and Technical Specification
Catalogue 1955 (very rare). 4 pages.
S320Z South Bend Drill Presses Precision and Economy Models all bench and floor-standing models: Sales and Technical Specification
Catalogue 1951 (very rare). 4 pages.
S350 Southwark Capstan Lathe Sales and Technical Specification
Catalogue. Early 1950s (very rare). 12 pages.
S400 SPANDAU (Buderus Spandu) Automatic Internal Grinding MSJ331, SJ351, SJ371,
SJ391, SIDP17, SIDA18. Sales and Technical Specification Catalogue. 6 pages
.
S400A SPANDAU (Buderus Spandu) Centre Grinding Machines SK1 and SK3. Sales
and Technical Specification Catalogue. 6 pages .
S400B SPANDAU (Buderus Spandu) Automatic Internal Grinding MSJ331, SJ351,
SJ371, SJ391, SIDP17, SIDA18. Sales and Technical Specification Catalogue. 6
pages .
S400C SPANDAU (Buderus Spandu) Type SJD17 and SJDP17 Duplex Grinders. Sales
and Technical Specification Catalogue. German Text. 6 pages .
S400D SPANDAU (Buderus Spandu) Automatic Internal Grinders SJ7, SJ9, SJM7,
SJM11, SJPM7 and SJPM11 with self-actuating component loading 7 unloading..
Sales and Technical Specification Catalogues. 40 pages (2 catalogues early
and late) .
S400E SPANDAU (Buderus Spandu) Duplex Automatic Internal Grinder SJD12. Sales
and Technical Specification Catalogues. 4 pages .
S400F SPANDAU (Buderus Spandu) Automatic Internal and Face Grinding Machine
S39EZ. Sales and Technical Specification Catalogues. 8 pages .
S500 SPEEDAX Riveting Machines No. 1 and No.2. Sales and Technical
Specification Catalogue. 4 pages.
S535 SPRINGFIELD (USA) Lathes. General Catalogue showing the 14" Toolroom,
20" Medium Duty, and 25" Heavy Duty with specifications for 14",
16", 18", 20" 25" and 32" Medium and Heavy Duty
Models. Sales and Technical Specification Catalogue (Bulletin 180) 1940s. 8
pages.
S535A SPRINGFIELD (USA) Precision Toolroom Lathes 24" , 26" and
30" Sales and Technical Specification Catalogue (Bulletins 154 and
156) 1930s. 12 pages.
S535B SPRINGFIELD (USA) Precision Toolroom Lathes 24" and 27" Sales
and Technical Specification Catalogue (Bulletin 158) 1930s. 6 pages.
S535D SPRINGFIELD Precision Toolroom
Lathes 14", 16", 18", 20", 25 and 32" Sales and
Technical Specification Catalogue (Bulletin 180) 1949. 8 pages.
S535E SPRINGFIELD Precision Toolroom Lathes 14", 16", 18" and
20". Sales and Technical Specification Catalogues - two copies (Bulletin
155 and 161). 1930s to early 1940s. 12 pages.
S535F Springfield Gear-head lathes 20" Super and 22" Standard
16-speed. Sales and Technical Specification Catalogue (Bulletin 159). 8
pages.
S535G SPRINGFIELD Precision Toolroom and Engine Lathes Model S, Model 280
and Model 180. Sales and Technical Specification Catalogue 1950s to 1960s.
Also shows Springfield Grinders (Bulletin 208). 8 pages.
S535H Springfield Heavy Duty 16" Model S lathe Sales and Technical
Specification Catalogue (Bulletin 195 circa 1960s). 8 pages.
S535J Springfield Medium Duty 20" Model S lathe Sales and Technical
Specification Catalogue (Bulletin 190 circa 1960s). 8 pages.
S540 STANDARD MODERN Series 2000 Lathe Sales and Technical Specification
Catalogue (1960s and early 1970s models) 6 pages.
A large collection of STANKOIMPORT catalogues and manuals is available. Please
e-mail your requirements :tony@lathes.co.uk
S545 STANKOIMPORT (Russian) SU50A, SS50A, SUK50A, SSK50A Lathes. Sales and
Technical Specification Catalogue. 20 pages.
S545A STANKOIMPORT (Russian) 676 Universal Precision Milling machine. Sales
and Technical Specification Catalogue. 12 pages.
S545B STANKOIMPORT (Russian) Model 1K62 Toolroom Lathe 8.5" x 56".
Sales and Technical Specification Catalogue. 8 pages.
S548 STANLEY Lathes: a collection of catalogues covering most of the models made: Older Models 8 pages.
Stanley HS-7 large spindle bore lathe 4 pages. Stanley HS-13 Large spindle bore 6 pages.
STANLEY 7 lathes 12 pages. STANLEY 10 Lathe 8 pages. STANLEY Hollow Spindle Lathes Models HS, HSP and HM. Spindle bore from 7" to 14".
STANLEY Lathes HS7, HS10, HS13 11 pages. STANLEY Lathes 12.5" and 14.5" 8 pages.
STANLEY SLIDING BED LATHES 10.5", 12.5" and14.5" - two catalogues early and late 25 pages and
STANLEY Lathe Accessories. 86 pages in all.
S548A STANLEY Sliding-Bed Lathes Catalogues. Covers the late-type models with three circular handwheels
arranged in a line across the top of the headstock's front face. 8 pages with a further 8 pages formed
from sections of a large publicity sheet.
S525 STAR Watchmakers' Lathes. 7 Sales Sheets showing the boxed lathe sets B, C D, E, F, R,
the base-mounted with countershaft and motor Combination Set No. 9m.C.,the
rare maker's stand-mounted unit with drawers, countershaft and light unit and a page on the simple "turns" versions.
English, French and Spanish Text.
S550 STARK (USA) Very early Stark Catalogue (circa 1870/80) with the entire
product range - lathes, accessories, drive systems, countershafts, treadle
stand, special tailstocks, collets, Wheel and Pinion Cutters, Stark Plain
Milling Machine, Stark Combined Universal Milling Machine and Wheel and
Pinion Cutter, Damaskeening Machine and Automatic Staff Lathe. Shows sections
through headstocks, the 4 lathe in various forms including with the milling
attachment, the No. 3 lathe in various forms with accessories mounted. A First
class, very high-resolution production. 36 pages.
S550A
STARK (USA) Stark Catalogue circa 1900-1910 (pencil annotation). Probably the
most complete of all the Stark literature, this lists and illustrates the entire
product range in four languages: English, German, French and Spanish. Includes
Precision Bench and Watchmakers' lathes - the Nos. 2,3, 31/2, 4, 41/2 and their
accessories, drive systems, countershafts, treadle stands, special tailstocks,
collets, etc. Wheel and Pinion Cutters, Stark Plain Milling Machine, Wig-Wag
Lap Grinder, Rotary Leaf and Pinion Cutter, Pinion Cutter for grinding Pinion
Cutters, 3-spindle upright Drill, Tapping Machine, Stark Plain Milling Machine,
Stark Universal Combined Universal Milling Machine and Wheel and Pinion
Cutter Forming Machine, Profiling machine, Tool Grinder, Rotary Pivot Polisher,
Lathe Milling Machine Attachment, Flat Steel Press, Improved Automatic Pinion
Cutter, Chuck Gauge, Screwcutting Chart, Damaskeening Machine and Automatic
Staff Lathe. Shows sections through headstocks, the 4 lathe in various forms
including with the milling attachment, the No. 3 lathe in various forms
with accessories mounted, etc. A first class, high-resolution production
that is presented in two printings: one fully cleaned scans the other
with the original scans of the pages with engravings "as is" with just
balanced contrast 56 pages (112 in total).
S550C STARK Machine Tools 1950s. A collection of catalogs and sales sheets
showing the entire range of machines and accessories available
during the 1940s and 1950s including the Series 400 Precision Lathe
(on underdrive stand), Stark Model 2
Precision Lathe, Milling Machines, Stark Model 3 ½ Precision lathe, the
STARK-AMES Model EH-3, Screw machines, Stark Integral Drive Bench Lathe,
various versions of underdrive stands
both wood and metal, a “Precision Bench Lathe Attachments” Catalogue
and details of the variable-speed
drive unit by The Master Electric Co, Price Lists and two letters
from the
Company. 85 pages. First-class, high-resolution production.
S550B STARK: Precision Bench Lathes: Full Range Lathe Catalogue and
Accessories, 1920s. 10 pages (not a particularly good reproduction).
S720CC STARTRTE Catalogue Compendium for Early to Late Models including the: Bandit 12S1,
"Twelve", Sabre, Volant, Wespa, Meba, Habegger, SP147, SP147S, SP147T. Types 216, 316, 216H,
316H, 14RWS, 20RWS, 30RWS. C600, C700, C800. Bandit 12S5, Bandit 12S10, Bandit 351.
Compact 600/S, Compact 800/S. Volant Series 18-T-10, 24-T-10, 18-V-10, 24-V-10.
Rapier Series 14RF, 20RF, 30RF, 14RWF, 20RWF, 30RWF, 14RWS, 20RWS, 30RWS, 14RWH,
20RWH, 30RWH. Sabre Series 216, 216H, 316, 316H. Type 301, Type 310B.
S1 and S5 Series 18-S-1, 18-S-5, 24-S-1, 24-S-5, 14-S-1, 14-S-5, 20-S-1, 20-S-5, 14-T-5,
24-T-5. 14V, 20V, 30V, 20RWF, 20RWS, 20RWH, 30RWF, 30RWS, 30RWH.
V Series V500F, V500H, V900F, V900H. Type 214, Type 214H, Type 314 and Type 314H. 96 pages.
S720 STARTRITE VOLANT Bandsaws. Sales and Technical Specification Catalogue.
6 pages. . (Most other Startrite Sales Literature also available - phone 01298-871633 to enquire).
S720A STARTRITE Bandsaws. Sales and Technical Specification Catalogue from the 1960s
showing the full range of machines includingblade welders, Startrite-Habegger
and Startrite-Mebamat models. 16 pages.
(Most other Startrite Literature also available).
S720B STARTRITE Belt-drive Drilling Machines. A complete (and interesting)
Catalogue collection of all belt-drive types: The Bantam (2 pages), the special
epicyclic-gearbox equipped SP160/8, SP161/8,
SP250/10 and SP 251/10 with epicyclic gearboxes (2 pages), Speedway (6 pages),
Mercury bench and pillar (8 pages) and the late-model S
D24, SD28, SD12, SD12P, SD58, SD58P, SD25 and SD25P (4 pages).
S720C STARTRITE Geared-head Drilling Machines. A Complete Catalogue collection
showing the: early-model EFI 1.25"( 4 pages), late-model EFI Series FC and FG (5 pages),
EFI Drills Types FG2 and FGR (4 pages), EFI Type FGR-T (6 pages), EFI Type FB4 (4 pages),
EFE Type FE (2 pages).
S720CC Startrite S1 & S5 Bandsaws Models 18-S-1, 18-S-5, 24-S-1, 24-S-5, 14-S-1, 14-S-5,
20-S-1 and 20-S-5. Sales & Technical Specification Catalogue with an annotated picture labelling the various parts. 4 pages .
S730 STALWART Lathe by Cryer and Dawson: Sales and Technical Specification
Catalogue. 4 pages.
S740 STEDALL Lathes. Sales and Technical Specification Catalogue. 4 pages.
S750 STEINEL Milling Machines: Catalogues for Models SH1, SH3.5, SH4, SV4, SH4g,
SV4g, MS400, MS500 and FH6 with NC Control. 28 pages.
S750A Steinel Multi-Spindle Drilling and Tapping Machines Types E, ET and BS/GS. Detailed and very well-illustrated Catalogue. 22 pages.
S750B Steinel Precision Machine Tools General Catalogue dated 1966 with machines for milling, drilling and tapping,
multi-drilling and tapping, multi drill head units,pivot burnishing, rivetting and millers with plug board and NC control. 8 pages.
S755 STEINHAUSER Lathes Sliding Head Turret Automatics E16, E20 and E25.
Sales and Technical Specification Catalogue. 16 pages. US MS500 and
FH6 with NC Control. 28 pages.
S760 STEPTO (USA) Shapers: Full-range, very well-illustrated Sales & Technical Specification Catalogue 18 pages.
S762 Stevens and Bullivant. Rotary Swaging Machines.
Full-range Catalogue. 50 pages.
S765 STIRK PLANING MACHINES. Sales and Technical Specification Catalogue set.
Edition 1: Details of later models with combined planing and milling facilities
in planing widths from 42" to 120" 22 pages.
Edition 2: Covers all earlier models ("Veloplanes" of the Standard
Pattern and Heavy Pattern, with admitted widths of 30" to 84" and the
Hiloplanes Class 1, Class 2 and Class 3. Gives details and dimensioned drawings
of capacity, stroke, speeds, etc. 32 pages.
Edition 3: Covering the Open-sided Hiloplanes (General Duty) Models. Detailed
technical descriptions of the machines. 14 pages.
Edition 4: Covering the Double-housing Hiloplanes and (very heavy duty)
Hiloplows. Detailed technical descriptions of the machines. 16 pages. The
Complete set
S765A STIRK PLANING MACHINES. Superb 1938 Catalogue celebrating the firm's
long-time success with historical details of John Stirk and a number of
interesting descriptions of how the machines developed and their technical
features. 40 pages.
S765B STIRK PLANING MACHINES. Catalogue dated 1920 with a
letter dated 1922 from the maker to a customer offering a rebuilt machine. 18
pages.
S770 STOREBRO BRUKS AKTIEBOLAG Lathes S18, S20, S22L and S24L. Sales and Technical Specification
Catalogue 8 pages.
S770A STOREBRO BRUKS AKTIEBOLAG Full-range Lathes Sales and Technical
Specification Catalogue. 10 pages.
S770B STOREBRO BRUKS Combi Miller. Sales and Technical
Specification Catalogue. 3 pages.
S780 STUDER PSM-150 Profile Pantograph-type High-precision Grinding Machine. Detailed and well-illustrated
Sales and Technical Specification Catalogue. 28 pages.
Sweeney & Blocksidge Presses. A full-range Technical Specification Catalogue of the company's vast range of foot and power presses.
Included area useful technical details of the adjustable-stroke mechanism on the power presses and how to set it, annotated drawing
identifying the various parts and diagrams showing the slide and adjustments possible on the No.12 and No.14 power presses and
setting the adjustments of the combined safety and tool catch. Fly presses illustrated include the No.1 to No. 12, various specialist
models such as the "Cutting Out", "Tall", "Double-sided", "Gang Piercing", "Girder Type", "Horning", Squeezing", "Deep-backed Girder",
"Large Blank", "Seam Closing", Foot-operated "Deep Throated Pendulum". Power presses Models 2, 4, 6, 7, 9, 11a, 12, 14, 35, 32, 36, 38. 53 pages.
S880 SWIFT (UK) Magnificent Catalogue dated 1930 showing the Company's radial drills, girder drills, tilting and swivelling work tables, etc. 140 pages.
SS880AX SWIFT (UK) Magnificent Catalogue dated 1924 showing the Company's Lathes, Shapers, Planers, Radial-arm and other drills, and Slotting Machines. 150 pages.
S880A SWIFT lathes. Full-range Catalogue from 1938 showing the Models:7L3, 8L3,
10L3, 8L6, 10L6, 12L6, 12L5, 15L5, 16L5, 18L10, 21l10, 24l10, 27L10, 24L12,
27L12 and 30L12. 32 pages.
S880B SWIFT Lathes: L Range Lathe Catalogue 1943 showing the L3, L5, L6 and L10
Models. 32 pages.
S880C SWIFT Lathes: L Range Specification Sheet 1938. 4 pages.
S880D SWIFT Type S "Swift-Sentinel" Lathes. Technical Specification
Catalogue. 4 pages.
S880LSA SWIFT Type SA lathes. Two Technical Specification Catalogues, one showing the standard lathe the other the production version. 8 pages.
S880F SWIFT Lathes: Full-range Lathe Catalogue 1948/1949 + 4 extra Catalogues
from the 1950s. Shows Lathes Models: V3, V5, V6, L10, L12, SV3, SV6, SV5, RL,
Type B, Type SA, Type F, Type A, Type SB. 57 pages.
S880G SWIFT Type A Lathes. Technical Specification Catalogue. 4 pages.
S880H SWIFT Type B lathes. Technical Specification Catalogue. 4 pages.
S880ZZ SWIFT Radial-arm Drills. Types A1, B4 and H5. Sales and Technical
Specification Catalogue 12 pages.
S880J SWIFT (CRAWFORD-SMITH, CRAVEN-SWIFT and Staveley Asquith) Type C Lathes: Sales and Technical Specification
Catalogue. 8 pages.
S880KK SWIFT (CRAWFORD-SMITH, CRAVEN-SWIFT and Staveley Asquith) Type C Series 60 Lathes: Sales and Technical
Specification Catalogue. 12 pages.
S880L SWIFT (CRAWFORD-SMITH, CRAVEN-SWIFT and Staveley Asquith) Type D Series 60 Lathes: Sales and Technical
Specification Catalogue. 12 pages.
S880M SWIFT (CRAWFORD-SMITH, CRAVEN-SWIFT and Staveley Asquith) Type F Lathes: Technical Specification Catalogue.
4 pages.
S881 SWIFT SUMMERSKILL Planers Types 24H, 30M, 30H, 36M 36H, 42M, 42H, 48M,
48H, 54M and 60M. Sales and Technical Specification Catalogue. 6 pages.
S890 SWISTEN Lathes. Precision Screwcutting Lathe Model 600/130. Sales and
Technical Specification Catalogue. 5 pages including Inspection Sheet.
S900 SYKES: Informative and useful Data Sheets with Specifications and
capabilities of a range of Sykes Gear Hobbing and Shaping Machines, the
sharpening of cutters, use of hobs, cutters and much general advice about gear
production: I.M.L.F6, H.6 Unimat Hobbing machine, I.M.L. Sykomat S6 Gear
Shaper, I.M.L. Multimat S6 Gear Shaper, 1B Horizontal Gear Generator, 1B M/C,
1B Semi-Automatic, 5E Horizontal Multi-Cutter, V6 Fine Pitch Gear generator, V10c,
V10C, Shaving Tools, Accurate Un-ground Hobs, Sharpening Gear Shaper Cutters,
Re-sharpening Shaving Tools, Re-sharpening Rotary Shaving Cutters, Hob
Sharpening, Generating-Milling Hobs, Gear Cutting Tool Surface Treatments, Gear
Cutting Tools Materials, Sharpening Sykes Gear Shaper Cutters, The Use of
Special Hobs, Choice of Cutter Size for Shaping Internal gears, Inch/mm,
MOD/D.P. Equivalents.
S900A SYKES Gear Generating Machinery. Early Full-range Catalogue giving useful details
of the following models: 1a, 2c, 3c, 4c, 5c and V.10. Also includes details of
the Gear Tooth Comparator, gear shaper cutters, Sykes Type N Involute Testing
Machine, Helical Gear Cutter Sharpening Machine, Helical Cutter Sharpening
Fixture, Gear Tooth Burnishing Machine and useful details of Gear Shaper Special Cutters and how
to handle them. 50 pages.
S900B SYKES General Brochure covering the: Genertron 2 CNC Gear Shaper; 750,
1000 and 1250 CNC Vertical Gear Shapers; Genamec 50/200 Gear Shaper; V400
Universal Gear Shaper; 1800R Vertical Rack Generator; 450 Horizontal
Multi-cutter Gear generator; 1600H Horizontal Multi-cutter Gear generator; H160
Automatic Hobbing Machine and Cutter Sharpening Attachments
S900C SYKES 1A, 3C and 5E Gear Generating Machines. Detailed Catalogue with General Principles of Operation, Design Features, Practical Applications and Technical Specifications
Booklet. 8 pages.
S900D SYKES 1B Horizontal Multi-cutter Gear Generator. Technical Specification
Sheet. 2 pages.
S900E SYKES 3C and 5E Horizontal Multi-Cutter High Production Gear Generator.
Sales and Technical Specification Catalogue. 6 pages.
S900F SYKES H6 Gear Hobber. Detailed Sales and Technical Specification Catalogue.
English, French and German text. 22 pages.
S900G SYKES S6 Gear Shaper. Detailed Sales and Technical Specification Catalogue.
English, French and German text. 22 pages.
S900H SYKES F6 Gear Shaver. Detailed Sales and Technical Specification Catalogue.
English, French and German text. 22 pages.
S900J SYKES V6 Fine Pitch Gear Generator. Sales and Technical Specification
Catalogue. 4 pages.
S900K SYKES V10 Vertical Gear Generator. Sales and Technical Specification
Catalogue. 8 pages.
S900L SYKES V10B Vertical Gear Generator. Detailed Sales and Technical Specification
Catalogue. 26 pages.
S900M SYKES V10C Vertical Gear Generator. Sales and Technical Specification
Catalogue. 4 pages.
S900N SYKES HV24 Universal Gear Hobbing Machine. Sales and Technical
Specification Catalogue. 2 pages.
S900P SYKES 50-200 Gear Shaper. Sales and Technical Specification Catalogue.
8 pages.
S900Q SYKES VR72B/1 Vertical Rack Generator. Sales and Technical
Specification Catalogue. 2 pages.
S900R SYKES H.150 Gear Hobber. Sales and Technical Specification Catalogue.
English, French and German text. 28 pages.
S900S SYKES H.160 Gear Hobber. 2 Sales and Technical Specification Catalogues.
One with English text the other with English, French and German text. 28
pages.
S900T SYKES V.400 Vertical Gear Shaping Machine. Sales and Technical
Specification Catalogue. English, French and German text. 24 pages.
S900U SYKES V.450H Horizontal Gear Generator. Sales and Technical Specification
Catalogue. 12 pages.
S900V SYKES 1000H and 1600H Horizontal Multi-cutter Gear Generators. Sales
and Technical Specification Catalogue. 12 pages.
S900W SYKES Gear Tooth Comparator. Sales and Technical Specification Catalogue. 4 pages
S900X SYKES GENERTRON Gear Shapers. Detailed Sales and Technical Specification
Catalogue. 16 pages.
S900Y SYKES Thrugrind Shaper Cutters. Sales and Technical Specification
Catalogue. 6 pages.
S975 SYPHER Lathes (USA) Comprehensive and well-illustrated Sales and
Technical Specification Catalogue showing the company's metal and wood lathes,
bandsaws, saw benches, combination machines and other products.32 pages.
T20 TACCHELLA UN-UM Universal Grinding Machines Models UN 618, UM618, UM 1018 and UM1518. Detailed Sales and Technical Specification Catalogue. 20 pages.
T20A Tacchella 4LS Universal Tool & Cutter Grinder. Sales and Technical Specification Catalogue. 6 pages
T30 TADU Lathes Production Programme Catalogue with the Models CE250, CE280, EN250, EN250 Duplo, EN300, F-650, FS750, FS-750 Ciclomat, FS-750-B/2, FS750(FS-LR), R4-1C, R4-2C, LR-BL, and RS. 12 PAGES
T40 TAKISAWA TAL6 and TAL 8 Lathes. Two Sales and Technical Specification
Catalogues. 18 pages.
T40A TAKISAWA LE Lathe. Sales and Technical Specification
Catalogue. 6 pages.
T40B TAKISAWA TE Heavy-duty Lathe. Sales and Technical
Specification Catalogue. 6 pages.
T40C TAKISAWA TKN Shaper. Sales and Technical Specification Catalogue. 6 pages.
T45 Takoang Pistin Ring Co. TKG-27 Cylindrical Grinder. Sales & Specification Sheet. 2 Pages
T51 TAYLOR (Geo.Taylor, Birmingham) Complete Detailed and profusely-illustrated Product Range Catalogue cira 1950 - 1955.
Milling Machines. Lathes including Spinning, Capstan, Brass Finishers and Plugging, Capstan Tooling. Lathe chucks. Collets and Feed Fingers. Machine Vices.
Bending and Forming Machines.Cutting Off Machines. Sawing Machines. 300 pages.
T52 TAYLOR (Geo. Taylor of Coventry) Vertical Miller Mk. 2. Sales and
Technical Specification Catalogue 4 pages.
T62A Taylor Spinning Lathes (Charles Taylor of Birmingham). Sales and
Technical Specification Catalogues: 3 editions from the 1940s to the 1970s
covering all types, sizes, accessories and prices. 24 pages. underdrive
models. 8 pages.
T62C Taylor Brass-Finishers' Lathes (Charles Taylor of Birmingham). Late-model
Sales and Technical Specification Catalogue. 4 pages.
T62D Taylor Brass-finishers Lathes (Charles Taylor of Birmingham). Sales and
Technical Specification Catalogue, 1940s underdrive models. 8 pages.
T62E Taylor Brass-finishers Lathes (Charles Taylor of Birmingham). Sales and
Technical Specification Catalogue, 1920 and 1930s models. 8 pages.
T62F TAYLOR (Charles Taylor Birmingham) Wonderful "Early Products"
Catalogue: Spinning, Brass-finishers', Centre, Screwcutting, Polishing, Bench,
Capstan, Plugging, Treadle and Special-purpose Lathes. Cock-boring and
Tapping machines, Eccentric Chucks, ordinary Chucks, Sawing Machines,
Brass-finishers' Milling machines, Tool and Cutter Grinder, etc. 75 pages.
T62G TAYLOR (Charles Taylor Birmingham) Late Model capstan Lathe Catalogue. 18
pages.
T62H TAYLOR (Charles Taylor Birmingham) Capstan Lathe and Accessories
Catalogue 1940s models. 20 pages, plus quotation letter.
T62J TAYLOR (Charles Taylor Birmingham) Capstan Lathe and Accessories
Catalogue 1920s and 1930s. 48 pages, plus price list.
T62K TAYLOR (Charles Taylor Birmingham) Capstan and Chasing Lathes and
Accessories Catalogue 1920s and 1930s. 12 pages, plus price list.
T62L TAYLOR (Charles Taylor Birmingham) Chucks Sales and Technical
Specification Catalogue for the tapered-scroll models. 20 pages of detailed
descriptions.
T62M TAYLOR (Charles Taylor Birmingham) Early (1296) Chucks Sales and
Technical Specification Catalogue for the tapered-scroll models. 12 pages, plus
price list.
T62N TAYLOR (Charles Taylor Birmingham) Chucks Sales and Technical
Specification Catalogue for the standard 2, 3 and 4-jaw chucks of the early
1920s. 8 pages.
T114 TAYLORand CHALLEN. Metal Spinning, Trimming and Beading Lathes. 17-page
Catalogue.
T114A Taylor and Challen Presses and Metal Forming Equipment. Original (not
reproduction) 445-page hard-back Catalogue in excellent condition.
T116 Taylor Hobson: a collection of individual Sales and Technical Specification Catalogues that cover the entire range of post 1930 Pantograph Engravers as made until the 1970s:
Model A early; Model A late; Models C, CX and CXL; Model D early; Model D late; Model JH early; Model JH late; Model K Mk.1; Model K Mk.2 early; Model K Mk.2 late; the special Taylor Hobson inclinable
dividing head and the "Pantograph Milling and Diesinking Machine" 52 pages.
T116A TAYLOR HOBSON Engraving Machines and Electro-Etching Appliances. Marked from the time was listed as "Taylor, Taylor & Hobson Ltd" Early
Sales and Technical Specification Catalogue (probably early 1930s) showing the traditional and
well-established Models C, CB and CX Models and the pantograph and Diesinking
Machine, Cutters, Cutter grinders, Copies, Copy Holders, circular tables,
dividing heads, Javelin etchers. Includes a description of how the engravers
are designed, how they work, their drive systems, examples of work produced,
special applications of the dividing head, special applications of the
ball-bearing spindles, etc. 45 pages.
T116B TAYLOR HOBSON Comprehensive and well-illustrated Catalogue showing the
full range of Accessories for Pantograph Engravers and Diesinkers. Includes:
Work examples, examples of Copy, Cutters, Copy-holders, Copy trays, Cutter
Grinders, Cutter Measuring Microscopes, Extension tables, Knife Holders,
Machine vices, Circular tables, Presser foot, Spindles, Forming 7 Milling
attachments, vertical milling head, Cam-type feed, Forming attachment, Presser
foot feed unit, Milling bracket, Dividing head, Dividers, Javelin electric
etcher, etc. 50 pages.
T116D TAYLOR HOBSON "Pantocut". Two catalogues: an introductory
specification sheet (2 sides) and a detailed, 12-page Catalogue for the model fitted with
CNC control the Pantocut PNC-4.
T117 THOMPSON Surface Grinders (USA) Two Catalogs covering the Surface Grinders Types C, B, BB and the Automatic Broach Grinding
Machines and the 12" x 36" Universal Grinder from the 1930s. 28 pages 28 pages
T118 THIEL 58 Precision Universal Miller Sales and Technical Specification
Catalogue 10 pages.
T119 THIEL 158 Precision Universal Miller Sales and Technical Specification
Catalogue - late edition 4 pages.
T119A THIEL 158 Precision Universal Miller Sales and Technical Specification
Catalogue - early edition 16 + inserts pages.
T119B THIEL 159 Precision Universal Miller Sales and Technical Specification
Catalogue 28 pages.
T119C THIEL Duplex 162 Universal Toolroom Boring and Milling Machine Sales
and Technical Specification Catalogue. Very detailed descriptions and superb
Illustrations. 38 pages.
T119D THIEL "Produro" Filing machines 111 and 115. Thiel
Segura" Precision Bandsaw. Sales and Technical Specification Catalogue.
16 pages
T119E
THIEL Filing & Sawing Machines. A publication by the importers E.H.Jones titled
"1862-1928 The Home of Thiel Precision Filing and sawing Machines". General
Catalogue and accessories. Sizes 1, 2, 3, 4 and 5 and Modes 13 and 17.
Detailed, descriptive and well-illustrated Catalogue. 20 pages.
T119F THIEL Precision Universal Milling Machine: Sales and Technical
Specification Catalogue 10 pages.
T119G THIEL 32 Punch and Form Shaping Machine. Detailed Sales and Technical Specification
Catalogue. Not a manual but very useful in showing the construction and
operation of the machine, the accessories available and how they are employed
and how to make a Blanking Punch, etc. 16 pages.
T119H THIEL Conturex 132 PUNCH SHAPER (Punch and Electrode
Shaping machine): Sales and Technical Specification Catalogues showing the
Mk.1 (single pedal) and Mk.2 (twin-pedal) models. 28 pages. English, German,
French and Spanish text.
T119J THIEL No. 19 High-speed Metal Bandsaw with a Technical Booklet
"Cutting Steel with Bandsaw". Sales and Technical Specification
Catalogue. 9 pages.
T119K THIEL Tapping Machines Nos. 23, 24, 25, 26 and 28. Sales and Technical
Specification Catalogue. 4 pages
T119L THIEL Automatic Screw Machine Type A.D.S. Sales and Technical
Specification Catalogue. 4 pages
T70 THULE Shapers. Early and late Sales and Technical Specification Catalogue showing the S16 and S22 Standard and
the 14, 16, 20, 22, 25, 28 and 30-inch stroke machines. 14 pages.
T70A THULE Surface Grinders Types PS18, PSH 24, TPH600, TPH 1000, TPH1200, TPH2000, TPH2500. Sales and Technical Specification Catalogue. 26 pages.
T70B THULE Vertical Slotting Machines Types ST6 and ST10 (covers the mechanically identical ST12 as well) Sales and Technical Specification Catalogue. 14 pages.
T70C THULE Mechanical Hacksaws (sawing machines) Types BS10 and BS12. Sales and Technical Specification Catalogue. 8 pages.
T80 Timbrell and Wright Capstan lathes. Sales and Technical Specification
Catalogue issued 1953. 20 pages.
T95 TORRENT "Tarragona" T.72-42 Lathe. Sales and Technical
Specification Catalogue. 2 pages.
TOS and STROJIMPORT Machine Tools (Czechoslovakia). A large collection of
sales and specification literature covering most of their machine-tool range:
01298 871633 or e-mail: tony@lathes.co.uk
T120T TORNI FTC 41, 51, 61 & 70 Lathes Sales, Technical Specification Catalogue. 16 pages.
T1100 TOS Factory Tour. Anniversary Booklet 1976. Profusely illustrated showing
machine-tool production in Czechoslovakia on the shop floor of the SKODA/TOS
works with Lathes, millers, grinders, drills, etc. in production.. Also gives a glowing, well-illustrated account
of the Communist paradise the workforce enjoyed - but fails to mention the single Government-controlled TV channel,
jailed dissidents and the Secret Police.. 66 pages.
T1100A TOS FYA-31 and FY-41 Sales and Technical Specification and Accessories Catalogue. 12 pages.
T1101 TOS A-32A and TOS A-40B Single spindle cam-controlled automatic turret
lathes. Sales and Technical Specification and Accessories Catalogue. 4
pages.
T1101A TOS MN80AN Precision Toolroom Lathes: Sales and Technical
Specification Sheets. 2 pages.
T1101B TOS R5, RC25, RP25, R80, RC80, R100, RC100, R125 and RB63 Capstan
Lathes. Sales and Technical Specification Catalogue. 8 pages.
T1101C TOS S-28 Toolroom Lathe. Sales and Technical Specification Catalogue.
2 pages.
T1101C2 TOS S-32 Toolroom Lathe. Two Detailed Sales and Technical Specification Catalogues. 11 pages.
T101D TOS S-32/750, S-32/1000 and SV-18-RA Toolroom Precision Lathes. Sales
and Technical Specification and Accessories Catalogue. 4 pages.
T1101E TOS S-32, SUS-63, SUS-80, SU-100 and SU-125 Lathes. Two detailed Sales and
Technical Specification and Accessories Catalogues. 36 pages.
T1101F TOS SN-40 and SN-50C Lathes. Sales and Technical Specification and
Accessories Catalogue. 4 pages.
T1101F2 TOS SN-40, SN45, SN-50, SN50, SN63 and SN77 Lathes. Three Detailed Sales and Technical Specification and
Accessories Catalogues, Early to Late. 26 pages.
T1101G TOS SN-55 Lathe. Sales and Technical Specification Catalogue. 16 pages
T1101H
TOS SN-63 and SN-71C Lathes. Sales and Technical
Specification Catalogue. 4 pages.
T1101J2
TOS SU-40 Lathe. Detailed Sales and Technical Specification and Accessories Catalogue.
Includes reproductions of the screwcutting charts 24 pages.
T1101J
TOS SU-50, SS-50, SUK-50 and
SSK-50 Lathes. Detailed Sales and Technical Specification and Accessories Catalogue.
20 pages.
T1101L TOS SU-63A, SU-80A and SU-90A Lathes. Sales and Technical
Specification and Accessories Catalogue. 12 pages.
T1101M TOS SU-100 and SU-125 Lathes. Two Detailed Sales and Technical Specification
and Accessories Catalogues. 26 pages.
T1101N TOS SUI-63 Lathe. Sales and Technical Specification and Accessories
Catalogue. 8 pages.
T1101P TOS SUI-50 CNC Bosch Lathe. Sales and Technical Specification and
Accessories Catalogue. 4 pages.
T1101Q TOS SUI-63 with Bosch Controls CNC Lathe. Sales and Technical Specification and
Accessories Catalogue. 2 pages.
T1101R TOS SUI-40 and TOS SUI-50 Lathes. Two Sales and Technical Specification
and Accessories Catalogue. 8 pages.
T1101S TOS SUI-63 and TOS SUI-80 Lathes. Sales and Technical Specification
and Accessories Catalogue. 4 pages.
T1101T TOS SV-18R Precision Toolroom Lathe (early rounded-lined model made by
Zbrojovka). Sales and Technical Specification and Accessories Catalogue. 12
pages.
T1101U TOS SV-18RB Precision Toolroom Lathe (late model with angular lines).
Sales and Technical Specification and Accessories Catalogue. 34 pages.
T1101U2 TOS SV-18RA and SV-18RD Precision Toolroom Lathes (late model with
angular lines). Sales and Technical Specification and Accessories
Catalogue. 38 pages.
TFV20 TOS SV-20 & SF-20 Milling Machines. Sales and Technical Specification and Accessories Catalogue. 24 pages
T1104V TOS SKIQ-8, SKIQ-12, SKIQ-16, SKIQ-20 and SKIQ-CNC-B Vertical Turning
Lathes. Sales and Technical Specification and Accessories Catalogue. 12
pages.
T1106A TOS FA3AH, FA3AU, FA3AV, FA4AH, FA4AU and FA4AV Vertical, Horizontal and Universal Milling Machines. Sales and Technical Specification and
Accessories Catalogues covering the complete range. 44 pages.
T1106E TOS Horizontal, Universal and Vertical Milling
Machines. Sales and Technical Specification and Accessories Catalogue. 18
pages.
T1106D
TOS FA3B Milling Machine. Sales and Technical Specification and
Accessories Catalogue. 4 pages.
T1106H
TOS FA Series Milling Machines. 97-page Sales, Specification & Accessories Catalogues
that contain full technical details of the entire range. Includes Types:
FA2H, FA2V, FA2U, FA3H, FA3V, FA3U, FA4H, FA4V, FA4U, FA5H, FA5V and FA5U.
T1106HB
TOS FA5BV (Vertical),FA5BH (Horizontal) and FA5BU (Universal) Series Milling Machines. Complete Sales,
Technical Specification and Accessories Catalogue Collection. 48 pages
T110FB
TOS FB-40V Vertical Milling Machine. 2-page Sales Sheet.
T1106X
TOS FB-32 and FB-25 Milling machines. Detailed, well-illustrated Sales and Technical Specification Catalogues. 60 pages.
T110FC
TOS FC-63V, FC-63H, FV-63-NC Milling Machine. Detailed, well-illustrated Sales and Technical Specification Catalogue. 24 Pages.
T110FDD
TOS FD-32 Knee Type Milling Machine. Sales and Technical Specification Catalogue. 8 pages.
T110FD TOS FD-40H, FD-40V and FD-40U Milling Machines. Detailed, well-illustrated Sales and Technical Specification Catalogue. 20 pages.
T1106L TOS FGS-20 and FGS-63 Milling Machines. Sales and Technical
Specification and Accessories Catalogue. 8 pages.
T1106LX TOS FGS-25, FGS-32 & FGS50 Knee Type Ram Head Milling Machines.
Detailed Sales and Technical Specification and Accessories Catalogues. 44 pages.
T1106M TOS FGS-32 and FGS-40 Milling Machines. Sales and Technical
Specification and Accessories Catalogue. 20 pages.
T1106N TOS FGS-50 Milling Machine. Sales and Technical Specification and
Accessories Catalogue. 20 pages.
T1106P TOS FGS-40 and FGS-50 CNC (computer controlled) Milling Machine. Sales
and Technical Specification and Accessories Catalogue. 8 pages.
T1106R TOS FGSQ-32 CNC (computer controlled) Milling Machine. Sales and
Technical Specification and Accessories Catalogue. 6 pages.
T1106S TOS FGU-32 Milling Machine. Sales and Technical Specification and
Accessories Catalogue. 6 pages.
T1106T TOS FNGJ-20 Milling Machine. Sales and Technical Specification and
Accessories Catalogue. 12 pages.
T1106U TOS FNK-25 and FNK-25A Milling Machines. Sales and Technical
Specification and Accessories Catalogue. 20 pages.
T1107 TOS FN-32 Precision Universal Milling Machine. Sales and Technical
Specification and Accessories Catalogue. 20 pages.
T1107A TOS FN-40 Precision Universal Milling Machine. Sales and Technical
Specification and Accessories Catalogue. 18 pages.
T1107Q TOS FQH-50A Bearbeitungszentrum (Fräse). Vertrieb und Technik
Technische Daten und Zubehörkatalog. Deutscher Text. 18 Seiten.
T1108 TOS FSQ-80, FSQ-100, FS-80 and FS-100 Bed-Type Milling Centres. Sales
and Technical Specification Catalogue. 6 pages.
T1110 TOS OHA-4 Gear Shaping Machine. Sales and Technical Specification and
Accessories Catalogue. 4 pages.
T1110a TOS OH-6 Gear Shaping Machine. Sales and Technical Specification and
Accessories Catalogue. 8 pages.
T1110b TOS OHA-50A Gear Shaping Machine. Sales and Technical Specification
and Accessories Catalogue. 20 pages.
T1110c TOS OF-10 Gear Hobbing Machine. Sales and Technical Specification
and Accessories Catalogue. 18 pages.
T1110d TOS OFP-20 Gear Hobbing. Sales and Technical Specification and
Accessories Catalogue. 2 pages.
T1110e TOS OF-71 Gear Hobbing Machine. Sales and Technical Specification
and Accessories Catalogue. 18 pages.
T1114 TOS BH Cylindrical Grinder. Sales and Technical Specification
Catalogue. 4 pages.
T1114A TOS BHU-32A, BHU-40A and BHU-50A Cylindrical Grinders. Sales and
Technical Specification Catalogue. 12 pages.
T1114B BN-102C Universal Tool and Cutter Grinder. Sales and Technical
Specification Catalogue, 6 pages.
T1114BB BN-102B Universal Tool and Cutter Grinder. Comprehensive, Detailed and well-illustrated
Sales, Technical Specification and Accessories Catalogue. 36 pages.
T1114C TOS BPH-320A Surface Grinder. Sales Technical Specification
Catalogue, 8 pages.
T1114D TOS BRH-20A Surface Grinder. Sales and Technical Specification and
Accessories Catalogue, 8 pages.
T1114E TOS BRH-40B Surface Grinder Sales and Technical Specification and
Accessories Catalogue, 16 pages.
T1114F TOS BU-28 Universal Cylindrical Grinder. Sales and Technical
Specification Catalogue. 28 pages.
T1114G TOS BUAJ-28 Universal Cylindrical Grinder. Sales and Technical
Specification Catalogue. 4 pages.
T1114H TOS BUB-31, BUB-40 and BUB50 Universal Cylindrical Grinders. Sales
and Technical Specification Catalogue. 10 pages.
T1114J TOS BBZ 60 Cylindrical Grinder. Sales & Technical Specification Catalogue. 8 Pages.
T1116 TOS LENR, LENP, LESP and LEPP Eccentric Presses. Sales and Technical
Specification and Accessories Catalogue, 20 pages.
T116A TOS LE50S and LE100P Eccentric Presses. Sales and Technical
Specification and Accessories Catalogue, 8 pages.
T1116B TOS CBA-100, CBA-160, CBJ-250 and CBJ-500 Hydraulic Presses. Sales
and Technical Specification Catalogue. 4 pages.
T1116C TOS LE-C Series (all sizes) Eccentric Presses. Sales and Technical
Specification Catalogue. 12 pages.
T1116D TOS LDR-25 Turret Punch Press. Sales and Technical Specification
Catalogue. 6 pages.
T1118 TOS P27 Circular Saw. Sales and Technical Specification and
Accessories Catalogue, 4 pages.
T1120 TOS W-75 Horizontal Borer. Sales and Technical Specification Catalogue,
16 pages.
T1120A TOS WH/63 and WH/80 Horizontal Boring Mills. Sales and Technical
Specification and Accessories Catalogue. 16 pages.
T1120G TOS WH-10-NC and TOS WH-10-CNC (TOS VARNSDORF) Horizontal Borer. Sales
and Technical Specification Catalogue, 4 pages.
T1120K TOS-WARNSDORF WHN-100, WHN-110, WHN-130, WHD-130 Horizontal Borers.
Sales and Technical Specification Catalogue, 16 pages.
T1122 TOS VR8A Radial Arm Drill. Sales and Technical Specification Catalogue.
4 pages.
T1200 TOVAGLIERI LATHES: TL180, TL200, TL215, TL250, TA250-300, GT350-400:
Sales and Technical Specification Catalogue. 39 pages.
T1225 TOWN WOODHOUSE Model 369 Turret Miller. 2 Sales and Technical
Specification Catalogues. 12 pages.
T1290 TOYO ML1 and ML2 Precision lathe. Sales and Technical Specification Catalogue.
2 pages.
T1290A TOYO (Sakai, Record and Proxxon) ML360 and ML2210 lathes and MA-360
and MA-210 Milling Attachments and Accessories. Technical Sales and
Technical Specification Catalogue 12 pages.
T1350 Traub Type AF130 Single Spindle Automatic Lathe. Sales, Accessories and Technical Specification Catalogue. 12 pages.
T1350A Traub Type A42 and A60 Single Spindle Automatic Lathes. Sales, Accessories and Technical Specification Catalogue. 16 pages.
T1350B Traub Type A15, A20 and A25 Single Spindle Automatic Lathes. Sales, Accessories and Technical Specification Catalogue. 26 pages.
T1350C Traub Type A26 Single Spindle Automatic Lathe. Sales, Accessories and Technical Specification Catalogue. 12 pages.
T1350D Traub Type A15L Automatic Long Turning Lathe. Sales, Accessories and Technical Specification Catalogue. English, French, German and Italian Text. 16 pages.
T1350E Traub Type M205 and M255 Sliding Headstock Automatic Lathes. Sales, Accessories and Technical Specification Catalogue. 12 pages.
T1350F Traub Types TB Single Spindle Automatic Lathes Models TB30, TB42, TBF42, TB60, TBH60, TB80, TBH80, TBF42. Sales, Accessories and Technical Specification Catalogue. 24 pages.
T1350G Traub AM42 Magazine Type Automatic Lathe. Sales, Accessories and Technical Specification Catalogue. English, French, German, Spanish and Italian text, 16 pages.
T1350H Traub Strohm M75, M105, M125, S75, S105, S125, SJ75, SJ105, SJ125. Precision Sliding Headstock Automatic Lathe. Sales, Accessories and Technical Specification Catalogue. 28 pages.
T1400 TREE (USA) Vertical Millers Models 2UV, 2UVR, 2VG and Accessories.
Sales and Technical Specification Catalogue 8 pages.
T1450 TRIDENT Model VO Vertical Miller: Sales and Technical Specification
Sheet. 2 pages.
T1460 TRIPET MUS-100 Universal Grinding Machines. Detailed 20-page Sales
Catalogue.
T1475 TRIPLEX No. 1 "3-in One" machine tool (by Ames, USA). Sales
and Technical Specification Catalogue.6 pages.
T1480
Troglia Torni Paralleli, Prismatici & Monopuleggia TPF, TPM, TPL 40-60-80, TPL 10-15-20, TPS 8-10-15,
TPE10-15-20, TPU, TPN, TPA 10-15-29.Pantografi per Stampi. Catalogo di Vendita. 16 Pagine.
T1490 TSUGAMI Super Precision T-CGD and T-IGD Cylindrical and Internal Grinding Machines. Sales & Technical Specification Catalogue. 8 pages
T1500 TURNER MACHINE TOOLS Birmingham. All- product Range Catalogue. Centre
and Capstan Lathes, Cutter Grinders, Shapers, Band Sanders, Grinders, etc. 48
pages.
T1500A TURNER Tool and Cutter Grinder. Sales, Accessories and Technical
Specification Catalogue. 11 pages.
T1500B TURNER MACHINE TOOLS Birmingham. Hydraulic Duplex Facing Machine. Sales and Technical
Specification Catalogue. 4 pages.
T1800 TYZACK Catalogue circa 1935. A vast range of Machines and Tools and Accessories for
Wood and Metal 243 pages.
T1800A TYZACK Catalogue "Woodworking Machinery"
circa 1935. Motorised Universal Woodworker, combination fret saws and lathes,
band sanders, saw benches, multi-function woodworkers, combination saw bench,
planer and boring machines, Junior universal woodworker, mortising machines,
wood and light-duty metal lathes, bandsaws, spindle moulders, box combing
machines, fret saws, bench planers, thicknessers, portable saws, flexible-drive
units, etc. 36 pages.
T1800B TYZACK Catalogue Circa 1930s with machine tools by Zyto, IXL, Drummond,
Myford, EXE, Milnes, Adept, Milnes and Britannia, etc.
24 pages.
T1800C Tyzack Saw Benches Catalogue. 4 pages.
U01 ULTRA Miniature Jig Borer Model "0" (identical to the BCA Mk.2)
Sales and Technical Specification Sheet. 2 pages.
U5 UNIMAC Universal Machining Centre by the Precision Grinding Company, Adelaide, Australia. Sales and Specification Catalogue that include useful "Parts as Exploded Component Drawings". 8 pages.
U10/H50A UNION (Harrison) 3.5 to 5-inch light lathes. 3 catalogues in one 12
pages.
U20 UNION (East Germany) Horizontal Boring and Milling Machines Models BFT
100/111, BFT 125/1, BFP 125/1 and BFP 160/1. Detailed Technical Sales and
Technical Specification Catalogue. 60 pages.
U30 UNION (also badged Harrison & Boxford) Tool & Cutter Grinder (this is not the G200 but an early version on traditional lines). Sales, Technical Specification & Accessories Catalogue.
4 pages.
U31 Union G200 Tool & Cutter Grinder (also badged Boxford). Sales, Technical Specification & Accessories Catalogue.
4 pages.
U40 United States No.1 Milling machine. Sales and Technical Specification
Catalogue including Vertical Head sheets. 6 pages.
U50 "UNIVERTICAL" (J.D.Duffey) Vertical 'Universal Miller' Sales
and Technical Specification Catalogue 2 pages.
U100 URSUS (CMT) Lathes. Specification Catalogues covering the 105, 200, 225 and
250 Models with spindle bores of 52 and 105 mm. 20 pages.
U190 UVA Grinders. Sales & Technical Specification Catalogue Collection covering the Series UHV Internal, Series UHN Internal,
Series UHM Automatic Internal, U55-N2, Servo-Sizer Internal, Chuckless Internal,Turbo-Head Pneumatic High-speed Grinding Spindle
26 pages.
U200 UW1 (Meyer and Burger) Universal machine tool. Sales and Technical
Specification Catalogue. 12 pages.
V10 VAN NORMAN (USA) Horizontal Milling Machine No. 2: Sales and Technical
Specification Catalogue 6 pages.
V10A VAN NORMAN (USA) Horizontal Milling Machine No. 3: Sales and Technical
Specification Catalogue 6 pages.
V10B Van Norman Milling Machine No. 6 Vertical and Horizontal Miller (with
Swivel Head with moveable ram): Sales and Technical Specification Catalogue.
6 pages.
V10C VAN NORMAN (USA) Milling Machine No. 16: Sales and Technical
Specification Catalogue.
V10D Van Norman Milling Machine No. 22L and 22M Vertical and Horizontal
Miller (with Swivel Head with moveable ram): Sales and Technical
Specification Catalogue. 6 pages.
V10E Van Norman Milling Machine No. 26 and 36 Sales and Technical
Specification Catalogue..
V10F Van Norman Milling Machine No. 38 Vertical and Horizontal Miller (Swivel
Head with moveable ram): Sales and Technical Specification Catalogue 4 pages.
V10G Van Norman Milling Machines No. 16S, 16L, 16M, 24LA, 24MA, 24MLA, 28A,
38MA, 38MEA Ram-type milling machines. Sales and Technical Specification
Catalogue. 12 pages.
V10H Van Norman No. 3-V Vertical Milling Machine: Sales and Technical
Specification Catalogue. 8 pages.
V10J Van Norman Index table for Dividing Heads.
V10K Van Norman Attachments, Arbors and Accessories for Ram Type and Horizontal
Milling Machines. 25 pages.
V10L Van Norman Attachments, Arbors and Accessories for Universal Milling
Machines. 12 pages.
V20 VARIO-LUX 130 lathe: Sales and Technical Specification Sheets 4 pages.
V30Z VARNAMO Milling Machines. A complete, full-range catalogue set showing the Models U-2, U-2L, P-2, P-2L, P-2A, FU-3, FP-3, FP-3A, FU2, FP2,FV-2KM, FV-2KMA, FV3-KM, FV-3KMA, P-1, U-1, P-1A, V-415, FV-30NC, U-30 Multi Mill NC, U-30 Universal, FV-1, U415, U-415 Multi Mill,
P-1AC, P-2AC, P-3AC, V-3AC, U-3 (P-3), U-3 Universal, U-2 (P-2) U-2 Universal, UA-1, U2, MAF-3-U, FV-2, FV-2M, U4 (P-4), U-4 Multi-Mill, V-3, V-3HD, FV-3A, FV-3AM, FP-3A, FU-3A and accessories Universal Index Centre D-5 and D6; Vertical
Attachments V-1A, V-1H. V-2H, VU-3, VU-4A, Side-mounted Swing Holder for vertical head; Slotting Attachment S-1 and S-1A; Rotary Table RT-12; Rack Dividing Attachment RD-1 and Machine Vice F-110.
Gear Hobbing Attachment E-102 and E-102-D; Milling Arbors, Collars and Collet Chucks. 164 pages
V30 VARNAMO FV-2 KM, FV-2 KMA, FV-3 KM and FV-3 KMA Vertical Milling Machines. Sales, Technical Specification and Accessories Catalogue. 16 pages.
V30A VARNAMO P-1, U-1 and P-1A Plain-universal and Multi-Mill Milling machines.
Sales, Technical Specification and Accessories Catalogue. 16 pages.
V30B VARNAMO U-2, P-2, P-2A, FU-3, FP-3 and FP-3a Plain Universal and Multi-Mill Milling Machines. Sales, Technical Specification and Accessories Catalogue. 16 pages.
V30C VARNAMO V-3 and V-3HD Vertical Milling Machines. Sales, Technical Specification and Accessories Catalogue. 12 pages.
V30D VARNAMO U-2, U-3 and U-4 Plain, Universal and Multi-Mill Milling Machines. Two Sales, Technical Specification and Accessories Catalogue. 24 pages.
V30E VARNAMO FV-2, FV-2M and FV-2KM Vertical Milling Machines. Two Sales, Technical Specification and Accessories Catalogue. 8 pages. (in bound Volume)
V30F VARNAMO FU-2 and FP-2 and Multi-Mill Milling Machines. Detailed and well-illustrated Sales, Technical Specification and Accessories Catalogue with Annotated Control Diagrams. 20 pages.
V30G VARNAMO FV-3A, FV-3AM, FP-3a and FU-3A Milling Machines. Two Sales, Technical Specification and Accessories Catalogue. 16 pages.
V30J VARNAMO UA-1 Milling Machine. Sales, Technical Specification and Accessories Catalogue. 4 pages.
V30HA VARNAMO Milling Machine Accessories: Individual Sales and Technical Specification Leaflets on the: Universal Index Centre D-5 and D6; Vertical
Attachments V-1A, V-1H. V-2H, VU-3, VU-4A, Side-mounted Swing Holder for vertical head; Slotting Attachment S-1 and S-1A; Rotary Table RT-12; Rack Dividing Attachment RD-1; Machine Vice F-110;
Gear Hobbing Attachment E-102 and E-102-D; Milling Arbors, Collars and Collet Chucks, 32 Pages.
V30SH VARNAMO Type SH Shapers. Sales, Technical Specification and Accessories Catalogue. 4 pages.
V30SK VARNAMO Type EV Shapers. Sales, Technical Specification and Accessories Catalogue. 10 pages.
VEREINIGTE DREHBANK-FABRIKEN (VDF) This was a "Trademark" for lathes
also badged variously as: BOEHRINGER, HEIDENREICH and HARBECK, WOHLENBERG
and BOEHRINGER, GOPPINGEN and WOHLENBERG. VDF Catalogues are amongst the
most beautifully produced of any machine-tool maker and often include colour
photographs of the factory and machines being assembled and used.
V39 VDF "Factory Tour" circa 1960s. A rare and fascinating review of
the VDF works and how the lathes were designed and built. Many wonderful
photographs showing the production and inspection processes from foundry to
finished machine. 90 pages.
V40 VDF Lathes Sales and Technical Specification sheet circa 1940/50 4 pages.
V40A VDF Standard Lathes Type S. Sales and Technical Specification Catalogue.
22 Pages.
V40B VDF Standard Lathes Type E/V. Sales and Technical Specification
Catalogue. 22 Pages.
V40C VDF V2 Lathes Sales and Technical Specification Catalogue (8.5-inch
centre height). 4 pages.
V40E VDF 18RO, 21RO and 24RO Lathes (some badged HEIDENREICH and HARBECK).
Two highly detailed and beautifully illustrated Sales and Technical Specification Catalogues for the earlier models with
rounded the castings. 48 pages.
V40F VDF 18RO and 21RO Lathes (some badged HEIDENREICH and HARBECK). Sales
and Technical Specification Catalogue for the later model with right-angle
edges to the castings. 8 pages.
V40G VDF 36D, 36S, 36L, 44D, 44S and 44L Lathes. Sales and Technical
Specification Catalogue. 14 pages.
V40H VDF 48D-S Lathes (Some badged BOEHRINGER and GOPPINGEN) Sales and
Technical Specification Catalogue. 40 pages.
V40H2 VDF 42D-S and 48D-3 Lathes (Some badged BOEHRINGER and GOPPINGEN) Sales and
Technical Specification Catalogue. 40 pages.
V40J VDF W50 and W75 Lathes Sales and Technical Specification Catalogue. 12
pages.
V40K VDF M530, V630, E560, M670, V800 Lathes (Some badged BOEHRINGER and
GOPPINGEN). Sales and Technical Specification Catalogue. 44 pages.
V40L VDF E710 and E850 Lathes (Badged WOHLENBERG HANNOVER). Sales and
Technical Specification Catalogue. 24 pages.
V40M VDF V-800-SB Lathes (Some badged BOEHRINGER and GOPPINGEN) Sales and
Technical Specification Catalogue. 26 Pages.
V40N VDF E1000 and E1200 Heavy-duty Lathes (Badged WOHLENBERG-HANNOVER).
Sales and Technical Specification Catalogue. 30 Pages.
V40P VDF E1000, E1000B, M1120, M1120B, V1250, V1250B and H1400B Lathes. Sales and
Technical Specification Catalogue. 4 Pages.
V40Q VDF VM1250 and VV 1600 lathes. Sales and Technical Specification
Catalogues. 4 pages.
V41 VDF BOEHRINGER D420, D480 and D530 Lathes. Two Sales and Technical
Specification Catalogues covering the standard and precision versions. 12
pages.
V41A VDF BOEHRINGER DM550 and DM640 Lathes. Sales and Technical
Specification Catalogue. 4 pages.
V41B VDF BOEHRINGER E560, M670 and V800 Lathes. Sales and Technical
Specification Catalogue. 4 pages.
V41C VDF BOEHRINGER U900S Sliding Bed and Adaptable-configuration Lathes
(Universal Turning Machine). Sales and Technical Specification Catalogue. 4
pages.
V41D VDF BOEHRINGER PN420, PN600 and PN900 Lathe. Sales and Technical
Specification Catalogue. 4 pages.
V41E VDF BOEHRINGER V800BC Deep-hole Boring Machine System. Sales and
Technical Specification Catalogue. 4 pages.
V41F VDF Lathes Models S710, E850, M100 and V1180. Sales and Technical
Specification Catalogue. 38 pages.
V41G VDF lathes Models E700, E800 and E800V. Sales and Technical
Specification Catalogue. 30 pages.
V41H VDF V800NC Lathe. Sales and Technical Specification Catalogue. 30 pages.
V41J VDF Turret lathes Types RS50, RS63, RS80 and RS100. A detailed technical
description of the lathes showing their construction, operation and ability to
undertake a wide variety of jobs. 54 pages.
V41K VDF "Future Developments in the Field of Numerical Turning"
Booklet 1962. 12 pages.
V41L VDF UNICOP Copying Lathe Types 1, and 3 Models S500, V3, E5, V5. Very detailed
and beautifully illustrated Technical Sales and Technical Specification
Catalogue with comprehensive descriptions of the machine's operating principles
and various functions. 82 pages
V41M VDF NC Product Range Catalogue and Technical Specifications 1969 with
Programming and Tooling data and Lathes: DP250NC, DP251NC, DP252NC, P500NC,
P800NC, V630NC, V800NC, V1000NC and V1180NC. 44 pages.
V41N VDF V800 NC Lathe. Sales and Technical Specification Catalogue. 34
pages.
V41P VDF P560 NC Lathe. Sales and Technical Specification Catalogue. 10
pages.
V41Q VDF E850 NC, M1000 NC and V1180 NC Lathes. Sales and Technical
Specification Catalogue. 8 pages.
V41R VDF V1250 NC Lathe Sales and Technical Specification Catalogue. 16
pages.
V41S VDF BOEHRINGER and VDF WOHLENBERG CNC Lathes: D420, D480, D530, E560,
M670, V800, DN570, DN820, DM640, PN600 and U900S Sales & Technical Specification Catalogue.
V41T VDF All-models Catalogue dated 1951 showing lathes, planing machines, bevel gear generators, Boehringer-Sturm
Hydraulic drive units and factory Views. Well illustrated
and detailed showing the Models: E3, V3, E5, V5, S355, S400, S450, S500, W35L, W35, W40, W45,
W50, W57, E13, E15, E16, E18, S400, S500, V3, E5, V5, Bondt-Hydrokop Versions, RS50, RS80, B3,
B5, B5B, R26, RH26, RH30,AE48, AE82s, AE108, 1365L and R260. Planing machines: 4E-850, 4E-1000, 6
E1000, 6E1250, AZ850, AZ1000, AZ1250, 6Z1000, 6Z1250, 6Z1500 and WZH8. Bevel gear generators: 12KH,
15KH, 15KHS, 25KH, 25KHS, 75KH, 75KHS, 26H, 60H and 160K. 54 pages.
V41U VDF V800SB Lathes. Sales & Technical Specification Catalogue. 24 pages.
V41V VDF 18/21RO Lathe with hydraulic copying attachment & multi-pass automation. Sales & Technical Specification Catalogue. 6 pages.
V41X VDF E1120, E1120B, E1400, E1400B and E1800B Lathes. Sales & Technical Specification Catalogue. 42 pages.
V41Y VDF E710 & E850 Lathes. Sales & Technical Specification Catalogue. 24 pages.
V41Z VDF Boehringer Plano-Milling Machines Sales & Technical Specification Catalogue. 32 pages.
V45 VEEM Lathe (badged PREMO) 5.5-inch centre height Australia. Sales and
Technical Specification Catalogue. 4 pages.
V47 Vernier Milling Machines. A set of Sales and Technical Specification Catalogues showing the FV3, FV3.5, FV300, FV3.TO,
FV250, FV270, FV280, FV300, FV380, Type 1059, and Vero 1000 Series NC. 60 Pages.. 60 Pages.
V50 VERSCHOYLE Hand-operated Lathe: Sales, Technical Specification and Accessories Catalogue with Instructions.
Profusely illustrated. 40 pages.
V55 VERNON (and "Sheldon/Vernon") Vertical Miller and Jig Borer. Two
Sales and Technical Specification Catalogues giving full details of the
machine and its accessories. Very rare. 8 pages.
V55B VERNON 11-inch Shaper. Sales and Technical Specification Catalogue. 4
pages.
V55C VERNON 12-inch Shaper. Sales and Technical Specification Catalogue. 4
pages.
V55D VERNON No. 0 Horizontal Miller. Sales and Technical Specification
Catalogue. 4 pages.
V55B VERNON Universal Tool and Cutter Grinder. Sales and Technical
Specification Catalogue. 4 pages.
V56 VERO 1000 Series NC Controlled Turret Milling Machines Models 15/24 and 20/40. Sales and Technical Specification Catalogue. 12 Pages.
V57 VERSA Multi-purpose Portable Milling Attachment. Sales and Technical
Specification Catalogue. 16 pages.
V60 VICTORIA Millers - see ELLIOTT - Victoria was a Model name used by that
company. Victoria M1 Miller 12 pages.
V61 VICEROY Synchro Variable-speed lathe. Sales and Technical Specification
and Specification Sheet. 2 pages.
V61B VICEROY Wood lathes, disc and belt sanders, edge tool sharpener, drills,
polishing and grinding machines, metal shaper. Sales and Technical
Specification Sheet 2 pages.
V61C VICEROY TDS 1/1 GB lathe with screwcutting gearbox and power cross feed.
Sales and Technical Specification Sheets early and late models 4 pages.
V61D VICEROY TDS 1 lathe screwcutting by changewheels and hand cross feed.
Sales and Technical Specification Sheet. 2 pages.
V61E VICEROY TDS 1LS lathe (screwcutting by changewheels and hand cross feed).
TDS 4 and 5BG (backgeared but plain-turning training lathe. TDS 3MS
Combination metal and Wood lathe. Sales and Technical Specification and
Specification Sheet 2 pages.
V61F VICEROY TDS 4 and 5 backgeared plain-turning lathe. Dedicated Sales
and Technical Specification Sheet 2 pages.
V61G VICEROY TDS 6WL dedicated Wood Turning Lathe. Sales and Technical
Specification Sheet. 2 pages.
V61H VICEROY: all the above lathe Catalogues.
V70 Vickers Dual Inch-Metric Micrometer Dials. Two Sales and Technical Specification Catalogues with details of their construction and design. 8 pages.
VIKING Milling machines - see under the makers "MONDIAL"
VILH PRDERSN - see under PEDERSEN above
V80 Vision (Stedall) Tool and Cutter Grinder. Sales and
Specification Catalogue. 4-pages.
V100 VÖEST DA 210 Lathe. Sales and Technical Specification Catalogue. 6
pages.
V150 VOUMARD Type 5 Internal Grinders. Detailed Sales and Technical Specification Catalogue. 16 pages.
V200 Vuilleumier Freres - see under FMO above
W1 Wade-CAV Miniature round-bed lathe. Detailed Sales and Technical
Specification Catalogue with sectional and general-arrangement drawings. Two
Catalogues combined (one from the USA agent) with some duplication. This
package represents all the data available for these lathes. 32 pages.
W10 WADE Precision Lathes (USA - Trading as "The Wade-American Tool
Company"). Full-range 1924 catalog showing lathes with the "American
Watch Tool Company" logo. Includes Price list and Company letter. 27
pages.
W10/A770 AMERICAN WATCH TOOL COMPANY - superb 31-page All-models and
Accessories Sales Catalogue.
W10A Wade Precision Lathe No. 3 Catalogue 1920s. 4 pages.
W10B Wade Precision Lathe No. 3 Catalogue of the 1920s with accessories,
attachments and drive systems. 12 pages.
W10C WADE Precision Lathes Nos. 3, 5 and 7: Catalogue 1943 (covers 1930s and
1950s types). 23 pages.
W10D Wade 8A Precision Screwcutting Lathe Catalogue circa 1910 - first edition.
9 pages.
W10E Wade 8A Precision - later but still early editions of the Sales and
Technical Specification Sheets. 4 pages.
W10F Wade 8A Precision Screwcutting Lathe: Catalogue 1940/50. 13 pages.
W10G All the above Wade literature concerning the company's Precision Bench
Plain and Screwcutting Lathes.
W10H Wade Precision "Hand Screw Machine" Models 5 and 7. Precision
Bench lathe on Underdrive Cabinet Stand. 1948. Sales and Technical
Specification Catalogue 12 pages.
W10J Wade Precision Lathe Models 94 & 98 A catalogue collection consisting of:
Catalog and Price List 1960 with 12 pages. A Model 98 Advertising Sheet 1960 with 2 pages.
Wade "Precision Turning Machines" Models 94 & 98. Sales Folder with 4 pages.
Wade Precision Lathe Production Unit (3-bearing headstock) Sales sheet with. 2 pages.
W10N Wade Bench Profiler. Sales and Technical Specification Catalogue. 4
pages.
WADKIN - Wadkin Catalogues are especially complete, well illustrated and
informative. A vast collection of literature is available of which the best are listed
below. Please phone: 01298-871633 or e-mail your requirements to :tony@lathes.co.uk
W15 Wadkin full-range Catalogue 1936 - this shows the machines as made from
around 1932 to 1949.
W15Z WADKIN "Bursgreen" Full-Range Catalogue dated 1965 including: 12"
Tilting Arbor Saw Type MY, Extension Tables for sawbenches MY and AGSm 14"
Tilting Arbor Saw Type AGS, 20" Circular Saw Type BCB, 24" Circular
Saw Type BLY, 14" Universal Overhead saw Type BCK, Electric Snipper Cross
Cut Saw Type BCT, Fret Sawing Machines Types BJS and BVT, 16" bandsaw Type
MZF, 24" bandsaw Type BZB, 6" and 9" Hand-feed Planers Type FS,
12" Surface Planer and Jointer Type BJR, Roller-feed Planer and
Thicknesser Type UO1/2, Combined Planer and Thicknesser Type UO/S, Vertical
Spindle Moulder Type BRS, Double Vertical Spindle Moulder Type BRS/2, Canting
Spindle Moulder Type ZA, Hollow Chisel Mortiser type DM, Single End Tenoner
Type CV, Vertical Boring Machine Type BLM, Woodturning Lathe Type BZL,
Combination Planer, saw and Borer Type QJ, 16" Disc Sander Type BJQ,
Hand-operated Straight Knife Grinder Type BNM, Woodwork's Tool Grinder Type
BZG, Circular Saw Sharpeners and Gulleters Types BVG and BLV, 10" Cutter
Grinder Type BNK, Moulding and Planing Cutter Grinder Type BES and Plane and
Moulding Iron Grinder Type BNL. 40 pages.
W15AA WADKIN WOODWORKING MACHINERY. A fabulous full-range, highly-detailed and
profusely-illustrated Catalogue from a time in the 1950s and 1960s when the
Company's achievements were at their zenith. Includes: Lathes, Saws, Cross
Cutting Machines, Spindle Moulders, Planing Machines, Planers and Moulders,
Mortises and Tenoners, Sanding Machines, Routers and Borers, Pattern
Millers, Grinders and Sharpeners. 300 pages. Each of the listed sections
can be supplied separately at each.
W15AAC WADKIN A handy all-models Catalogue dated 1962 illustrating and describing the:
CC Cross Cutting and Trenching Machine, CW Hydraulic Cross Cutting and Trenching Machine,
CJ Hydraulic Cross Cutting and Trenching Machine , PP Tilting Arbor Dimension Saw,
DR 30” and 36” Band Sawing Machines, PUA Straight Line Edger and Power Rip Saw,
RZ 16” Surface Planer and Jointer, FE 24” Panel Planing and Thicknessing Machine,
RK 24” Panel Planing and Thicknessing Machine, FX 30” Panel Planing and Thicknessing Machine,
FM 18” and 24” Surface Planing and Thicknessing Machine, EQ and EX Spindle
Moulders and Shapers, LS High Speed Router, LFH High Speed Radial Router,
AGC 7” x 4” Four Sided Planing and Moulding Machines, FD 4” x 4” Four Sided
Planing and Moulding Machines, FD 8” x 4” Four Sided Planing and Moulding Machines,
FD 12” x 6” Four Sided Planing and Moulding Machines, ECA Tenoning Machine,
EKA Tenoning Machine, WO and WG Double Ended or Cut Off Saw Types, WR Panel Trim Saw,
MA Chain and Chisel Mortiser, MF Combined Chain and Chisel Mortiser,
JTA Combined Disc and Bobbin Sander, JV Double Disc Sander, OT 42”
and 52” Triple Drum Sanders, GH Wadkin-Sherrill Speed Feed Belt Sander,
LQ Overhead Recessing Machine, WX Semi-Auto Pattern Miller,
WZ Semi-Auto Pattern Miller, WL Universal Pattern Miller.
HH Loroch Automatic Band Saw Grinder, HF Loroch Automatic Saw Sharpener,
NQ Straight Knife Grinder and NH Universal Cutter Grinder. 48 pages
W15B WADKIN Tools and Accessories for Woodworking Machines. Detailed, 140-page Catalogue.
W15C WADKIN RS and RU Wood Lathes: Sales and Accessories Catalogue. 28
pages.
W15C2 WADKIN BXL Wood Lathe: Sales and Accessories Catalogue. 6 pages.
W15C3 WADKIN BZL Wood Lathe: Sales and Accessories Catalogue. 6 pages.
W15D WADKIN Universal Milling Machine (for metal) Type WL. Sales and
Technical Specification and Accessories Catalogue. 20 pages.
W15E WADKIN Cutter Equipment for Heavy Duty Routers. Technical-Specification
Catalogue. 24 pages.
W15F WADKIN Overhead Recessing Machine Type L.Q. Well-illustrated
Technical-Specification Catalogue showing the various set-ups possible with the
machine. 12 pages.
W15G WADKIN Tools & Accessories for the Wadkin Junior Pattern Miller. 18 pages.
W15U WADKIN Articulated Arm Routers Types L.C. and L.C.6. Sales and
Technical Specification and Accessories Catalogue. 12 pages.
W15W WADKIN Rotary Indexing table Type S.U. Sales and Technical Specification
and Accessories Catalogue. 2 pages.
W15X WADKIN Radial Arm Drill Type MRD. Sales and Technical Specification
and Accessories Catalogue. 2 pages.
W15Y WADKIN Radial Arm Routers Types L.E. and L.G. Sales and Technical
Specification and Accessories Catalogue. 6 pages.
W15ZNC WADKIN Type TH NC Controlled Milling and Drilling machine. Comprehensive
Sales and Technical Specification and Accessories Catalogue. 20 pages.
W17 WAHLI Multi 78 Multi-purpose, Swiss-built Precision Machine Tool. Detailed and well-illustrated
Sales, Specification and Accessories Catalogue. Text in English, French and German. 20
pages.
W17A WAHLI Multi 76 Multi-purpose, Swiss-built Precision Machine Tool. Detailed and well-illustrated
Sales, Specification and Accessories Catalogue. Text in English, French and German. 8 pages.
W19 WALCOTT Lathe Company (USA) Sales and Technical Specification Catalogue.
Early 1920s - very rare. 16 pages.
W22 WALDRICH SIEGEN Large Machine Tools. Full-range Catalogue (English text)circa 1960s:
High-speed lathes, Roll-turning Lathes, Roll Grinders, Planers, Combination
Planer and Milling Machines. 16 pages.
W22A WALDRICH Planers - circa 1920s to 1930s. Sales Catalogue showing the huge types made by this German specialist in giant machine tools. GERMAN TEXT 36 pages.
W22B WALDRICH SIEGEN Well illustrated and very detailed Roll Grinding Machines Sales and Technical Specification Catalogue 1962 that shows a variety of models and their use, explains their
functions, how to operate them, the use of accessories and shows a variety of roll-grinding operations. 56 pages.
W24 Walker-Turner (USA) Variable-speed Wood Lathe: Sales and Technical
Specification sheet 2 pages.
W24a Walker-Turner Machine Tools for Industry Catalogue. Listings and
illustrations of Band Saws, Belt and Disc Surfacer, Cut-off Machines, Drill
Presses (including radial types) Grinders, Lathes, Surfacer, Transmission
Equipment and Motors, etc. 35 pages.
Walter Dividing Heads, Rotary table, and Universal and Semi-Universal Indexing Heads and Accessories. Sales and Technical Specification Catalogues covering the Models:
UTA (Universal Indexing Heads) HU (Semi-Universal Indexing Heads) HT-U, HT-HU, SVT, HTR, HT-HPI, HU-HPd-AA, TARM, TARM-HW, HU-NEW, TAWN-NES, ZST, SVT 100 HPd, KTN-P, VTW, VT HU W, SHU, BV,
HTR-S, ST, STD, VT, VT-HU, TAV, EST, SHU, VTW, VT-HU-W, TAVW, ZST, BV, Rt, RtL, RtW, RtS, Rt-TG, RtF-TG, RtW-TG, SVT, RTW-P, RtS-TG, Rt-G, Rt-T, RtTG, RtL-TGRtL-TW, Rt-GM, Rt-MP, RtW-NES, RtM-Z, RtM-F,RtM-FA 15/1/24, RtMQ-FA 11/6/2, RtM-FA, RtMQ-FA, RtM2Q-FA, RtA, HT-U, RtM-FE 500 G, Rt-MP, RtS-NES/2, etc. 16 pages.
W24W Walter Tool & Cutter Grinders. A comprehensive, well-illustrated 76-page all-models Catalogue showing details of the machines design and construction
and giving the full technical specifications for the Type 20, 20AY, 20AZ, 30AY, 30AZ, 30CY, 30CZ, 30QC, 40CY, 40CZ, 40CQ, 50CY, 50CZ, 50CQ, UWS20,
UWS30, UWS30CQ, UWS40, UWS50, Copytronic-501, Helitronic NC and full details of the Walter "Module" system, dust extraction, the numerous different
workheads, indexing fixtures, spiral grinding attachments and the very wide range of standard and special equipment.
W25
WALTHAM (Waltham machine Works) Precision Bench Lathes and Accessories,
Milling Machines, Filing Machines, Automatic machines and Sub-Press Dies.
Sales and Technical Specification Catalogue 24 pages.
W25A
WALTHAM Watch Company (Waltham machine Works) "Waltham and the European Made Watch". 1919 Edition of a 48-page booklet "Designed
to give a more intimate understanding of what constitutes a "good" watch by revealing some processes of its manufacture..."
Explains why the Waltham watch is superior.
W27 WANDESS Lathes. Sales and Technical Specification and Accessories
Catalogue. 4 pages.
W29 WARCO All-range Catalogue late 1980s to early 190s. Includes lathes Models:
1340, 1024, 1327, 918. Millers: Type 4VS, A2F, A1S, VMC, Economy, Minor and
major Mill Drills. Saws, Drills and Accessories, etc.28 pages. US
WARD - an extensive collection of WARD Sales and Technical Specification
lathe literature is available. Please phone: 01298-871633 or e-mail your
requirements to :tony@lathes.co.uk
W31 WARD Capstan and Turret Lathes. Superb full-range catalogue circa 1930s to 1940s showing the following models and all the variations of specification: 0, 1, 3, 1A, 2A, 3A, 7,
7 Combination, 7B, 8B, 10B, 7B Hexagon, 8B Hexagon, 10B Hexagon, 8 Combination, 10 Combination, 13 Combination, Second Process, the 1, 2, and 3 Ungeared Capstans and a
complete 71-page section on Capastan tooling and accessories.238 pages.
W32 Ward Capstan and Turret Lathes. Described on the cover as an Operator's
Handbook but really more of a combination Instruction Manual and Catalogue
showing virtually every model produced. This was published from the 1930s to
the 1970s. Wonderful illustrations. 71 pages.
W33 WARD "Over Sixty Years Of Capstan and Turret lathe
Manufacture": Celebration booklet showing the manufacturing process in the
Birmingham factory of H.W.Ward. 31 pages.
W33A Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1940s to the 1950s. Shows Models: OE, 1A, 2A, 3A, 7, 7 Combination, 8 Combination,
10 Combination, 13 Combination, 16 Combination, "Hexagon Turret for Bar Work" and Special Tool Layouts, English, German, French & Spanish Text. 28 pages.
W33B Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1950s onwards. Shows Models: 2A, 2DS, 3A, 3DS, 7DS, 7 Combination, 7 Prelector, 8 Combination,
10 Combination, 10/13 Combination, 16 Combination, Hydraulic Copying Attachment and Special Tool Layouts, English, German, French & Spanish Text. 40 pages.
W40 Ward, Haggas and Smith (Keighley) Lathes. Beautifully illustrated and
comprehensive Full-range lathe Catalogue circa 1931. 83 pages.
W40A Ward, Haggas and Smith (Keighley). Full-range Milling Machine Catalogue. Vertical, Horizontal, Bench and Plano-miller types. 32 pages.
W41/MW249 WARNER and SWASEY: A Company History 1880 - 1930. 66 pages.
W41A Warney and Swasey "How to Machine Parts on Turret Lathes - A
Tooling Guide Book with dozens of clearly illustrated examples of how to select
and set up tooling to complete jobs of all kinds. 64 pages.
W41B Warner and Swasey 1A, 2A and 3A Turret lathes. Full-range, detailed and
well-illustrated Sales and Technical Specification and Accessories
Catalogue dated September 1929. 42 pages.
W41C Warner and Swasey Turret Lathes. Full-range Catalogue. Undated, but from
the text probably mide1930s. Full-range, detailed and well-illustrated Sales
and Technical Specification Catalogue. 45 pages.
W41D Warner and Swasey Turret Lathes. Full-range, detailed and
well-illustrated Sales and Technical Specification Catalogue. Dated 1947. 28
pages.
W41E Warner and Swasey Precision machine Tools. Full-range Sales and
Technical Specification Catalogue. Dated 1962. 6 pages.
W42B Warner and Swasey 0CA Single Spindle Automatic Chucking Machine. Sales
and Technical Specification and Catalogue. 4 pages. Dated 1976.
W42C Warner and Swasey 1A Single Spindle Automatic Chucking Machine. Sales
and Technical Specification and Catalogue. 8 pages. Dated 1956.
W42D Warner and Swasey 1AC Single Spindle Automatic Chucking Machine. Sales
and Technical Specification and Catalogue. 16 pages. Dated 1959.
W42E Warner and Swasey No. 2 Single Spindle Automatic Chucking Machine. Sales
and Technical Specification and Catalogue. 8 pages. Dated 1958.
W42F Warner and Swasey No. 2A Universal Heavy-duty Turret Lathe. Sales and
Technical Specification and Catalogue dated 1942. 26 pages.
W42G Warner and Swasey No. 2A Extra Heavy-duty Turret Lathe. Sales and
Technical Specification and Catalogue dated 1959. 8 pages.
W42H Warner and Swasey No. 2AB Single Spindle Automatic Bar Machine. Sales
and Technical Specification and Catalogue. 8 pages. Dated 1959.
W42J Warner and Swasey No. 2AC Single Spindle Automatic Chucking Machine.
Sales and Technical Specification and Catalogue. 24 pages. Dated 1977.
W42JA Warner and Swasey No. 2AC Single Spindle Automatic Chucking Machine.
Sales and Technical Specification and Catalogue. 8 pages. Dated 1968.
W42K Warner and Swasey No. 3 Universal Ram Type Turret Lathe. Sales and
Technical Specification and Catalogue dated 1959. 4 pages.
W42L Warner and Swasey No. 3 Universal Turret Lathe. Sales and Technical
Specification and Catalogue dated 1946. 12 pages.
W42M Warner and Swasey No. 3A Extra Heavy-duty Saddle Type Turret Lathe.
Sales and Technical Specification and Catalogue. 24 pages.
W42N Warner and Swasey No. 3AC Single Spindle Automatic Chucking Machine.
Sales and Technical Specification and Catalogue. Dated 1959. 8 pages.
W42P Warner and Swasey No. 3AC Single Spindle Automatic Chucking Machine.
Sales and Technical Specification and Catalogue. Dated 1974. 8 pages.
W42Q Warner and Swasey No. 4 Universal Turret Lathe. Sales and Technical
Specification and Catalogue. Dated 1945. 10 pages.
W42R Warner and Swasey No. 4 Universal Ram Type Turret Lathe. Sales and
Technical Specification and Catalogue. Dated 1957. 8 pages.
W42S Warner and Swasey No. 4A Extra Heavy Duty Saddle Type Turret Lathe.
Sales and Technical Specification and Catalogue. Dated 1956. 8 pages.
W42T Warner and Swasey No. 4AC Single Spindle Automatic Chucking Lathe. Sales
and Technical Specification and Catalogue. Dated 1968. 18 pages.
W42U Warner and Swasey No. 5 Universal Turret Lathe. Sales and Technical
Specification and Catalogue. Dated 1942. 14 pages.
W42V Warner and Swasey 6-spindle Automatic Bar Machine. Sales and Technical
Specification and Catalogue. Dated 1957. 6 pages.
W42W Warner and Swasey 16-inch Electro-Cycle Turret Lathe. Sales and Technical
Specification and Catalogue. Dated 1959. 14 pages.
W42X Warner and Swasey ""Big Change in Turning - meet the New
Warner and Swasey Automatic Chucker". A detailed explanatory 10-page
booklet.
W42Y Warner and Swasey 2-SC 2-axis NC Turret Lathe. Sales and Technical
Specification and Catalogue. 4 pages,
W42Z Warner and Swasey SC-15 Numerically Controlled turret Lathe. Sales and
Technical Specification and Catalogue (1976). 20 pages,
W43 Warner and Swasey WSC-8 CNC Turning machine. Sales and Technical Specification
and Catalogue. 2 pages,
W43A Warner and Swasey (Bendix) Universal 315 CNC Lathe. Sales and
Technical Specification and Catalogue. 8 pages,
W43B Warner and Swasey (Bendix) WSC-8-E7 Turning System. Sales and
Technical Specification and Catalogue. 4 pages, W44 WAY (George M. Way
and Co. Hartford, Conn.) Scroll Saws, Shuteing Board, hand drills, treadle
saw lathe attachment . Sales Folder 8 pages.
W43Z Waterbury & Farrel Solid Die Double Stroke Crank Headers. Sales & Technical Specification Catalog. 12 pages.
W44 Webster & Bennett Vertical Turning and Boring Millers. Series 2 DH and EH Models. Sales & Technical
Specification Catalogue showing all versions with well-illustrated constructional details, design features, full speed, feed and capacity charts,
special adaptations, accessories, tooling and toolholders. 38 pages.
W44A Webster & Bennett Vertical Turning and Boring Miller Series 1 Model DH. Sales & Technical
Specification Catalogue with
well-illustrated constructional details, design features, full speed, feed and capacity charts,
special adaptations, accessories, tooling and toolholders. 48 pages.
W44B Webster & Bennett Vertical Turning and Boring Miller Series 1 Model D. Sales & Technical
Specification Catalogue with well-illustrated constructional details, design features, full speed, feed and capacity charts,
special adaptations, accessories, tooling and toolholders. 40 pages.
W44C Webster & Bennett Double Column Vertical Turning and Boring Millers. Sales & Technical
Specification Catalogue showing all sizes of the Series DCM machines. Well-illustrated
constructional details, design features, accessories, tooling and toolholders. 32 pages.
W44D Webster & Bennett NC (Numerical Control) Vertical Turning and Boring Millers. Sales & Technical
Specification Catalogue. 24 pages.
W44E Webster & Bennett Model S and Model R Vertical Turning and Boring Millers. Three Sales & Technical
Specification Catalogue. 40 pages.
W44F Webster & Bennett 1930 Full-range Catalogue showing the Single Table 20" to 30",
Duplex Machines 20" to 48" and various combinations of features and the new "High-Power" types.
46 pages.
W46X WEILER Lathe Range Catalogue 1955 showing the screwcutting, plain turning and capstan models:
MDU, MF, LDS, RDU, LZU, LZG and giving the specification
of the variants. Two catalogues, one with English text, the other German. 8 pages
W46 WEILER PRECISION TOOLROOM LATHES General Sales and Technical
Specification Catalogue dated 1959/60 in English, French and German. Covers
the MDU-260, MFU-260, RDU-260, FDU-260, FDU-260, MD-220W, MF-220W, LD-220W,
LZG-280N, LZU-280W, LZ-300W, LZ-300VS, LZ-330W and LZ-330VS, 8 pages.
W46A WEILER Precision lathes: Range Catalogue, small format. Shows the lathes
made in the late 1950s and through 1960s: LZ-330, LZ-300, LZ-280, LZ-220,
LD-220, MD-260, MF-260, FDU-260, RDU-260, MD-220, MF-220 and MATADOR and the
two Horizontal bed type Millers (FHP600) 20 pages.
W46B WEILER Precision lathes: Full-range Catalogue, small format, 1972 version. 20
pages.
W46C WEILER Accessories Catalogue for LZ280 and LD250 Lathes in English and
German. 12 pages.
W46E WEILER PRECISION TOOLROOM LATHE Accessories Catalogue for CONDOR and
MATADOR 300 and 280 Models. 56 pages.
W46F WEILER LZ-280S Precision Lathe Sales and Technical Specification Sheet.
2 pages.
W46G WEILER MATADOR W and VS Precision Centre Lathe. Detailed Sales and
Technical Specification Catalogue. 22 pages.
W46H WEILER MATADOR VS Precision Centre Lathe. Sales and Technical
Specification Catalogue. 4 pages.
W46D WEILER Accessories Catalogue for MATADOR 330, 300 and 280 lathes. In
English. 24 pages.
W46J WEILER CONDOR VS Precision Centre Lathe. Sales and Technical
Specification Catalogue. 8 pages.
W46N WEILER COMMODOR Precision Centre Lathe. Sales and Technical
Specification Catalogue. 8 pages.
W46K WEILER PRAKTIKANT 140 and 160 Precision Centre Lathes. Sales and
Technical Specification Catalogue. 8 pages.
W46L WEILER PRAKTIKUS Precision Centre Lathe. Sales and Technical
Specification Catalogue. 4 pages.
W46M WEILER PRIMUS Precision Centre Lathe. Sales and Technical Specification
Catalogue. 10 pages.
W46Q WEILER ERGODOR "Ergonomic" Centre Lathe. Two Sales and Technical
Specification Catalogues No. 001 and No. 784. 16 pages.
W46S WEILER Lathes - a special collection of catalogues showing all 260 and 220
models (including the HPF-260 and HPR-260 Hydro-Pneumatically Controlled versions) together
with the early screwcutting lathes the Types LZ and LD. 30 Pages.
W46Y WEILER Accessories Catalogue for Precision Lathes Series 260. 28 pages.
W47 WEILER RDT and RDU Lathes Sales and Technical Specification Catalogue 4
pages.£12
****************
W-SET The complete set of Weiler catalogues covering all the conventional types
listed above
****************
W46V WEILER PRIMUS NC Precision Lathe. Sales and Technical Specification
Catalogue. 8 pages.£15
W46W WEILER PRIMUS CNC Precision Lathe. Sales and Technical Specification
Catalogue. 8 pages.
W46P WEILER COMMODOR NC Precision Centre Lathe. Sales and Technical
Specification Catalogue. 8 pages.
W46U WEILER 2030 NC Lathe. Sales and Technical Specification Catalogue 8
pages.£15
W46X WEILER RDU260, MDU260, MFU260, FDU260 Capstan Lathe. Sales and Technical
Specification Sheets. 8 pages.£15
W46Z WEILER AR-36 Turnomat Camless Automatic Turret Lathe. Sales and
Technical Specification Catalogue 16 pages.£30
W48 WEILER Milling machine FPH-600. Sales and Technical Specification
Catalogue 4 pages.£12
WW48A WELLSAW - Mechanical Hacksaws (Womersley & Broadbent, Halifax). Detailed Sales and Technical Specification Catalogue. 4 pages.
WELLS-INDEX - see under INDEX
W49 WERMELINGER Lathe Type MJ8 Sales and Specification Sheet. 2 pages.
W50 WERNER (Fritz Werner)
Full-range Catalogue - Milling Machines, Grinding Machines, Lathes, Drills,
Dividing Heads, Milling Heads, Circular Tables, Vices, Cutters, Clamps, etc.
128 pages (small format)
W50AZ WERNER (Fritz Werner) Machines of the 1950s. Full-range Catalogue Millers
Sizes: 1, 2, 3, 4, 5, 8 with Accessories. Grinding machines, Optical Comparator
and Superfine Finishing Lathe. English and German Text.
W50A WERNER (Fritz Werner) Nos.
1, 2, 3, 4, 5 and 6 Universal, Vertical and Plain Milling Machines Types
FV1d, FV2, FH1d, FH2, FU1d, FU2. FV2d, FV3, FH2d, FH3, FU2d, FU3, FV3d, FV4,
FH3d, FH4, FU3d, FU4,FH4d, FH5d, FH5,
FH6, FV4d, FV5, FV5d and FV6. Detailed Sales, Technical Specification and Accessories
Catalogue. 48 pages.
W50D WERNER (Fritz Werner) Production Milling Machines Types 5.100, 9.100,
9.102, 5.130, 9.132, 5.101, 9.101, 9.103, 5.131 and 9.133. Sales and
Technical Specification Catalogue 8 pages.
W50E Werner Models 1.5, 2.5, 1.6 and 2.6 in types HF Horizontal, VF Vertical, UF Universal. 18 detailed pages.
W52 WETZEL Boring Machines "Working Instructions, Special Attachments,
Tools, Work Holders, Speed and Feed Charts" dated 1928 with
specifications and pictures of the various models. 111 pages.
W52A Whitehead 6-inch Bench Planer and 6-inch Horizontal Belt Sander. Sales and technical Specification catalogues. 8 pages
W52B Winslow Exactamatic Drill Point Grinder. Sales, Technical Specification & Accessories Catalogue. 4 pages.
W53 Wickman Scrivener Grinding Machines Catalogue dated 1965. Gives details and technical specifications of:
Centreless Grinders Nos. 0, 0-Cadet, 1, 2G, 2H and 3. 24/30 Duplex, 18/20 Duplex, 36 D.P.G. Duplex Peripheral,
618/824 Surface, Cam lathe, Rocker Grinder and details of automatic feeding devices including: swing overloaders, roto tip,
overhead loaders, transport rolls and semi-automatic outboard supports. 14 pages.
W53A Wickman-Scrivene No.1 Centreless Grinding Machine. Sales, Technical Specification & Accessories Catalogue. 12 pages.
W53X Wiedemann R7 Turret Punch Press. Sales and Technical Specification Catalogue with details of the Direct Measuring Gauge Table and how it'
W54 Wilkins and Mitchell Presses. Superb, full-range Catalogue circa 1950s to
1970s. 78 pages
W56 WILSON Woodworking Machinery. A large collection of catalogues is
available. Phone: 01298-871633 with your requirements.
W58 WILLARD Lathes: 13-inch geared and cone-drive head models. Sales and
Technical Specification Catalogue. 10 pages
W68 Willson Catalogue Collection: Vee Bed Gap Lathes 91/2" leaflet 4 pages; Willson Vee Bed Gap Lathes
101/2" leaflet 4 pages; Willson Vee Bed Gap Lathes 121/2" leaflet 4 pages; "A New Willson 81/2" Centre Lathe" Leaflet
4 pages; Willson 85/8" lathe. Leaflet 4 pages; Willson 71/2" lathe - Four different Sales leaflets for the
early (1949) version with lever control of the headstock spindle speeds. 20 pages; Willson 71/2" Lathes. Brochure for the later (1953 on) model
with dial on front of headstock. 12 pages. illson Tracer Lathe. Catalog 8 pages.
W59 WILLSON SLANT BED LATHE Catalogue (presented as the "Elliot
Ensign" for the USA market) Sales and Technical Specification Catalogue.
8 pages.
W68E Willson Model 70 Junior 7" Lathe circa 1955 8 pages.
W68F "A New Willson 85/8" Centre Lathe" Leaflet 4 pages.
W68G Willson 85/8" lathe (this model had two concentric speed-change levers on the front face of the headstock and, alongside, a 3-position quadrant lever for the screwcutting and feeds reverse) Leaflet 4 pages.
W68H Willson Vee Bed Gap Lathes 91/2" leaflet 4 pages.
W68J Willson Vee Bed Gap Lathes 105/8" Early Model Sales and Technical
Specification leaflet 4 pages.
W68K Willson Vee Bed Gap Lathes 105/8" Interim Model Sales and Technical
Specification leaflet 4 pages.
W68L Willson Vee Bed Gap Lathes 105/8" Late Model Sales and Technical
Specification leaflet 4 pages.
W69M Willson Vee Bed Gap Lathes 121/2" leaflet. 4 pages.
W70 WINFIELD (badged "Grayson") lathes: 3-inch Models R and H and
heavier 3 5/8-inch models. Sales and Technical Specification Sheets. 3 pages.
WOHLENBERG - see under VDF
W80-1 WOLF, JAHN Full-range Catalogue 1903 GERMAN TEXT. Includes lathes in many styles, milling machines,
bench centres, surface plates, vices, etc. 84 pages. Not to our normal very high standard of reproduction - but still of reasonable quality.
W85 Wolpert Material Testing Machines - from the 1970s: Hydraulic Universal Testa UE, Testatron Electronic Testing Machines,
Tensile Strength Testers ZRE 500, XRE 1000, Hardness Tester DIA Testor 2RC, Hardness Tester Automat, Hardness Tester Testor
300 Automatic, Hardness Tester HT 1 as, Hardness Tester Brinell High-speed Press BS300, Hardness Tester Mikro Testor,
Special hardness Tester for Brinell Tests, Hardness Tester with single column and adjustable head optical head H 146,
Dynatron Dynamic Testing Machine, and theVisco-Elastometer for testing non-resistant bending materials. Sales and
Technical Specification Catalogue. 16 pages.
W90 WOODHOUSE and MITCHELL 7" Model Junior 70 Lathe Catalogue 1951 8
pages.
W91 WOODHOUSE and MITCHELL 7" Model Junior 70 Lathe Catalogue 1955 8
pages.
W92 WOODHOUSE and MITCHELL 7" Model Junior 70 Lathe Catalogue 1957 8
pages.
W93 WOODHOUSE and MITCHELL 7" Model Junior 70 Lathe All 3 Catalogues
above 24 pages.
W94 Woodhouse and Mitchell 81/2" Model 85 lathe. Two different
Catalogues early and mid 1950s. 16 pages.
W95 WOODHOUSE and MITCHELL 369 Turret Milling Machine: Catalogue. 8 pages.
W100 WMW UNION (VED - East Germany) facing lathes DP1 to DP5: Catalogue. 22 pages.
W100A WMW UNION Borers Types BFT
100/111, BFT 125/1, BFP 125/1 and BFP 160/1. Comprehensive and beautifully
illustrated Sales, Specification and Accessories Catalogue. 60 pages.
W100B
WMW UNION Horizontal Borers Types BFT63 and BFT80 Two Sales, Technical Specification & Accessories Catalogues, one early,
the other late, showing all versions of the machines with the top-of-the-head pulleys enclosed (for earlier models see publication W100D). 34 detailed and well-illustrated pages.
W100BE
WMW UNION Horizontal Borers 1954. First Catalogue issued in English for the Types BFT63, BFT80, BFT100, BFT125, BFP 125, BFP 160 and
BFP 200 (machines distinguished from later models by exposed pulleys on top of the main column).
Detailed and well illustrated Sales, Technical Specification & Accessories Catalogue. 18 pages.
W100C
WMW UNION Horizontal Borer Type BFT 125/5 Sales, Technical Specification & Accessories Catalogue 26 detailed and well-illustrated pages.
W100D
WMW UNION Horizontal Borers Types BFT63 and BFT80. Early models from the 1950s with exposed pulleys on top of the head. Sales, Technical Specification & Accessories Catalogue. 16 pages.
W100E
WMW UNION Horizontal Borers Types BFT 80/2 and BFT 90/2 Sales, Technical Specification & Accessories Catalogue. 20 pages.
W100F
WMW UNION Horizontal Borers Types BFT 80/3 and BFT 90/3 Two Sales, Technical Specification & Accessories Catalogues. 16 pages.
W100G
WMW UNION Horizontal Borer Type BFT 100.1V (BFT 100.4) Sales, Technical Specification & Accessories Catalogue. 22 pages.
W100H
WMW UNION Horizontal Borer Type BFT 110/5 Sales, Technical Specification & Accessories Catalogue. English, German and Spanish text. 20 pages.
W100J
WMW UNION Horizontal Borers - New Types (circa 1984) BFT 110 and BFT 130. 4-page basic specification Catalogue.
W100K
WMW UNION Horizontal Borer Type BFT 125.111 (BFT 125.3) Sales, Technical Specification & Accessories Catalogue. 22 pages.
W100L
WMW UNION Horizontal Borer Type BFP 125.111 (BFP 125.3) Sales, Technical Specification & Accessories Catalogue. 22 pages.
W100M
WMW UNION Horizontal Borer Type BFP 160.1 (BFP 125/1) Sales, Technical Specification & Accessories Catalogue. 22 pages.
W100M
WMW UNION Horizontal Borer Type BFP 160.1 (BFP 125/1) Sales, Technical Specification & Accessories Catalogue. 22 pages.
W100N
WMW UNION Horizontal Borers Types BFT 110/6 and BFT 130/6 Sales, Technical Specification & Accessories Catalogue. 16 pages.
W100P
WMW UNION Horizontal Borers Types BFT 90/3-3 Sales, Technical Specification & Accessories Catalogue. 8 pages.
W101 Willimott "IDEAL" Lathes. Sales & Technical Specification Catalogue. 5 pages.
W102 Worcester Lathes. Catalogue showing the 12" and 14" Models 4 pages
W102A Worcester Power Presses (Jones & Attwo0d Ltd.). Detailed 20-page Catalogue with specifications for the Bench-Type
2-ton, 3-ton, 6-ton, 10-ton and L.D.D.T Standard and L.D.D.T Geared and the OBI Floor-Standing 18-ton, 30-ton and 50-ton.
W103 WORNER Bench Drilling Machines Model B4 and B8. Sales and Technical Specification Sheet. 2 pages.
W104 WORSON Die Cushions. Interesting Technical Sales and Data Catalogue from
the 1950s. 52 pages.
W104G WOTAN RJ17 and RJ33 Internal Grinding Machines. A detailed Sales, Technical Specification and Accessories Catalogue that
also includes some essential details of how the machines operate and how to use them and employ the accessories.24 pages.
Also included is a separate 8-page Wotan all-models catalogue that includes the external, internal and surface grinding machines RJ12, RJ17, RJ23, RJ30, RJ33
H15, H16, FH29, V31, RP37, and W26.
W104H WOTAN Grinders all-models catalogue that includes the external, internal and surface grinding machines RJ12, RJ17, RJ23, RJ30, RJ33
H15, H16, FH29, V31, RP37, and W26. 8 Pages.
W105 WYSSBROD Type 5 Automatic milling machine, Type B57 Boring and Milling
Machine, Type 125 Pinion Cutting machine, Type 130 Hydraulic Gear Cutting
Machine, Type 124 Automatic Hob Relieving Machine. Sales and Technical
Specification Catalogue 20 pages.
W107 WYVERN Lathes Models 4WT, 5WT and 4WT with Hydraulic Copying. Set of Sales
and Technical Specification and Accessories Catalogues. 24 pages.
W107A WYVERN WYVOMATIC, WYVERTIC and WYFACE Duplex Turning, Facing, Boring
and 2-spindle Facing Machines, Sales and Technical Specification Catalogue.
18 pages.
Y110 Yamazaki (Japan) Lathes Types A, B, C and D Sales and Technical
Specification Catalogue. 4 pages.
Y110A Yamazaki "Rex" Lathes Models: 24, 30 and 34 Heavy Duty. 12
pages.
Y500 YASDA Jigmaster Models YBM-50J-S, YBM-80J and YBM-80JR. Detailed Sales and Technical
Specification Catalogue. 16 pages.
Z50 ZAYER Models AF, BF, BFD and BFP Bed-type Milling Machines. Detailed Sales and Technical
Specification Catalogue. English, French, German and Spanish text. 16 pages.
Z50B ZAYER Models AM and BM Ram-type Milling Machines. Detailed Sales and Technical
Specification Catalogue. English, French, German and Spanish text. 16 pages.
Z50C ZAYER Models MF and CM Fixed bed, moving column Milling Machines. Detailed Sales and Technical
Specification Catalogue. English, French, German and Spanish text. 16 pages.
Z100 Zbrojovka (also branded TOS and MAS) SV18R Lathe (early model with "Rounded" styling). Detailed Sales and Technical Specification
Catalogue. 12 pages.
Z100A Zbrojovka (also branded TOS and MAS) SV18RA Lathe (lathe model with "Angular" styling). Detailed and very well illutrated
Sales, Technical Specification and accessories catalogue covering every aspect of the lathe. Includes a basic electrical schematic. 22 pages.
Z200 ZTM (Poland) TUB32 Lathe. Sales and Specification Catalogue. 4 pages.
Z400 ZUBAL AP-250 Lathe. Detailed and interesting Sales, Technical
Specification and Accessories Catalogue. Includes reproductions of the
Screwcutting and feed Charts. 12 pages.
Z400A ZUBAL Lathes Models C-1 and C-2 Sales, Technical Specification and
Accessories Catalogue. 14 pages.
Z450 ZUBI A-1000, A-1500 and A-2000 Lathes. Sales, Technical Specification and
Accessories Sheet. 4 pages.
Z500 ZYTO and IXL Lathes. Full-range Catalogue from the makers, S. Tyzack and Son of
London. This rare publication includes other makes of the 1930s. 24 pages.
The Best Ski School in
Verbier and Zermatt - Switzerland
europeansnowsport.com
Professionally-qualified staff and many native English speakers
click here for lathes.co.uk home page
Please e-mail your requirements :tony@lathes.co.uk
lathes.co.uk
Machine Tool
Catalogues, Sales and Technical Specification Literature
This page is catalogues only; for
Technical Manuals and Parts Lists click here
01/02/09