SOLD: Myford Super 7B lathe 3.5" x 19" Serial No SK 132766 manufacture 1976. Backgeared, with a screwcutting gearbox, power cross feed and a spindle clutch. Mounted on a bespoke steel framed and steel panelled stand of substantial build with two large, deep drawers and an open shelf area below. The lathe is in excellent condition and used only for light model engineering and kept in a purpose-built, modern workshop. 
A wide range of accessories is included: 4-inch Burnerd 3 jaw chuck, the correct half-depth body 6-inch Burnerd 4-Jaw chuck, ER32 collet chuck machined to suit the lathe, boxed set of ER32 collets from 3 mm to 20 mm, late-type, twin-bolt per axis Myford vertical slide with Myford machine vice,  Dixon-type quickset toolpost with 8 tool holders, fixed steady, rear toolpost, cross slide mount ball- turning attachment, saddle lock by Hemmingway, 1/2" and 1/4" tailstock drill chucks, tailstock rotating centre, faceplate, catchplate, Myford thread/EMCO 14 mm chuck adaptor, small and large drive dogs, MT2 taper parallel lathe test bar, homemade spindle-drive handle for slow-speed threading, etc. spindle drawbar, fly cutter holders and HSS toolbits, miscellaneous 6 mm and 8 mm HSS toolbits and some 6 mm brazed carbide-tipped tools, Morse taper centres, set of clamping bolts to suit Myford T slots and unused cans of the special lubricating oils to suit the lathe - Vactra No 2 and Nuto H32. £3750
Interested buyers are welcome to inspect the lathe 15 miles west of Birmingham.