email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Edgwick TD Mk.1 Lathe

For Sale: Edgwick Lathe Type TD 6.5" x 30". An older machine but very heavily built with a full screwcutting and feeds gearbox, power sliding and surfacing feeds and a large detachable gap piece that allows work up to 20 inches in diameter and 5 inches deep to be machined on a faceplate. Clutched and auto-braked spindle running taper roller bearings and with a 1.75-inch bore. Hardened plunger location to the top slide for "dead-on" alignment with the bed. Complete with: 3-jaw chuck, 4-way toolpost, thread-dial indicator (and an indicator to cut multi-start pitches). An ideal, strong, but low-cost lathe for a farm, motor or general-repair workshop. 3-phase electrics. Faults: the bed gap piece is missing; however, the chuck reached well forward and so the carriage remains almost fully supported even when well forward. It is not known if the motor runs. £375 Full details of these interesting, high-quality Mk. 1 Edgwick lathes here  Phone: 01630-654455 or 07976-918647 (Whitchurch, Shrops)

- hosted on www.lathes.co.uk -
- more advertisements here -

High resolution pictures--may be slow to open